Search

This study evaluates the feasibility of producing high-strength low-alloy (HSLA) steel using advanced wire-fed laser additive manufacturing (LAM-W) and wire arc additive manufacturing (WAAM) technologies. Optimized parameters were independently developed for each heat source, utilizing a self-designed HSLA steel wire as the feedstock. Microstructural features and mechanical properties of the fabricated steels were characterized and compared, taking into account differences in heat input and cooling rates. LAM-W samples exhibited a finer columnar grain microstructure, while both LAM-W- and WAAM-produced steels predominantly showed lower bainite and granular bainite microstructures. LAM-W demonstrated higher strength and hardness, lower ductility, and comparable low-temperature toughness compared to WAAM. Both processes demonstrated an excellent balance between strength and ductility, with absorbed energy exceeding 100 J at −40 °C. The study confirms the feasibility of producing high-strength and tough HSLA steel parts using LAM-W and WAAM technologies, and compares the advantages and disadvantages of each method. These findings assist in selecting the most suitable wire-fed AM process for HSLA steel fabrication at high deposition rates. [ABSTRACT FROM AUTHOR]

Establishing lucerne field is an efficient way to protect natural steppes, alleviate conflicts between meadows and livestock, and promote the development of animal husbandry. However, problems such as extensive field management, valuing yield over quality, and low resource utilization are endemic in production. Exploring reasonable cultivation patterns can contribute to improving the current situation of artificial grassland production and promoting the high-quality development of husbandry and prataculture. Lucerne the field experiment was carried out in Jingtai, Gansu Province, China in 2021–2022; this study compared and analyzed the effects of three cultivation patterns—ridge tillage with plastic film mulching (PM), ridge tillage with biodegradable film mulching (BM), and traditional flat planting (FP)—on soil water, heat, and fertilizer, as well as lucerne growth, yield, quality, and water and nitrogen use efficiency. The results show that: (1) during the growth period of lucerne, PM and BM treatments augment the average moisture content of the soil layer of 0–120 cm by 31.19% and 24.03% compared to the FP treatment, respectively. In the soil layer of 0–40 cm, PM and BM treatments abate the soil moisture content of the ridges by an average of 19.29% and 7.89% compared to that in the ditches, respectively. In the soil layer of 40–120 cm, PM and BM treatments elevate the soil moisture content of the ridges by 4.40% and 4.65% on average compared to that in the ditches, respectively. The average soil temperature in a soil layer of 5–25 cm shows PM > BM > FP. In contrast with the FP treatment, PM and BM treatments increase the soil temperature of the ridges by an average of 1.87 °C and 0.96 °C and decrease that of the ditches by an average of 0.47 °C and 0.46 °C, respectively. After two years of planting, the three cultivation patterns all promote the soil nutrient content. Compared to the FP treatment, PM and BM treatments increase the organic matter content by 9.94% and 19.94%, respectively. (2) Ridge tillage with film mulching can evidently stimulate the growth of lucerne and enhance yield and quality. Compared to the FP treatment, PM and BM treatments enhance plant height by an average of 15.37% and 4.04%, stem diameter by an average of 34.14% and 14.58%, yield by an average of 21.20% and 14.77%, crude protein content by an average of 13.47% and 7.68%, and relative feed value by an average of 8.71% and 4.41%, respectively. (3) During the two-year growing period, the irrigation amount of lucerne was 508.60–615.30 mm, and the evapotranspiration was 563.70–761.80 mm. Compared to the FP treatment, PM and BM treatments hoist water use efficiency by an average of 43.50% and 17.56%, nitrogen partial factor productivity by an average of 21.20% and 15.22%, and net income by an average of 14.78% and 11.05%, respectively. In summary, in ridge tillage, both ordinary film mulching and biodegradable film mulching can create a favorable soil environment for lucerne growth and heighten production effect. The former has a better effect on advancing the lucerne production effect, and the latter exhibits superior performance in improving soil fertility. [ABSTRACT FROM AUTHOR]

Stroke often results in hemiparesis, impairing the patient's motor abilities and leading to upper extremity motor deficits that require long-term training and assessment. However, existing methods for assessing patients' motor function rely on clinical scales that require experienced physicians to guide patients through target tasks during the assessment process. This process is not only time-consuming and labor-intensive, but the complex assessment process is also uncomfortable for patients and has significant limitations. For this reason, we propose a serious game that automatically assesses the degree of upper limb motor impairment in stroke patients. Specifically, we divide this serious game into a preparation stage and a competition stage. In each stage, we construct motor features based on clinical a priori knowledge to reflect the ability indicators of the patient's upper limbs. These features all correlated significantly with the Fugl-Meyer Assessment for Upper Extremity (FMA-UE), which assesses motor impairment in stroke patients. In addition, we design membership functions and fuzzy rules for motor features in combination with the opinions of rehabilitation therapists to construct a hierarchical fuzzy inference system to assess the motor function of upper limbs in stroke patients. In this study, we recruited a total of 24 patients with varying degrees of stroke and 8 healthy controls to participate in the Serious Game System test. The results show that our Serious Game System was able to effectively differentiate between controls, severe, moderate, and mild hemiparesis with an average accuracy of 93.5%.