Search

The main objective is to identify the level of advancement of safety systems in various levels of smart factories. Smart level verification systems are being implemented in Korea, but safety systems are not paying much attention to smart factory level checks. Using a checklist, nine Korean electronics manufacturing enterprises checked their level of safety system. The checklist consists of 142 items, which were divided into four dimensions (laws and certifications, safety designs and configurations at the facilities, safety devices and guards, and maintenance and training). As a result, a high-ranked enterprise in smart factory level showed excellence in the safety system maturity level as well. Compared to the level of the company's smart factory, the level of advancement of safety systems has been confirmed to be lower.

There has been very little reported on ginsenoside composition and antioxidant activity of hydroponic-cultured ginseng roots (HCR), leaves (HCL), and stems (HCS). We profiled 6 ginsenoside compounds in HCR, HCL, and HCS using high-performance liquid chromatography. Antioxidative activity of HCR, HCL, and HCS were evaluated using total phenolic content (TPC) and total flavonoid content (TFC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) free-radical-scavenging activity assays, and ferric reducing antioxidant power (FRAP) assays. Total ginsenoside contents of HCL and HCS were significantly higher than that of HCR (P

Herein, for the first time, we demonstrate ultra-fast fabrication of a tape casted NiO-yttria stabilized zirconia (YSZ) anode support for solid oxide fuel cells (SOFCs) using resonant acoustic mixing (RAM) technology. Due to its characteristics of non-contact and high-intensity acoustic field-assisted mixing, NiO-YSZ tape-cast slurry is prepared via a RAM process within ∼0.5 h, > 140 times faster than use of a conventional ball-milling (BM) process (∼72 h). During the RAM process, liquid binders more effectively penetrate into soft agglomerated ceramic powders and covered larger surface area than the case of BM process. The optimization of RAM procedure requires more subdivided mixing sequence and higher content of binders and plasticizers compared to that of the BM. Despite drastically reduced mixing time, the microstructures of RAM Ni-YSZ anode, quantified via a 3D reconstruction, are statistically identical to that of BM Ni-YSZ. The SOFC employing RAM Ni-YSZ anode support achieves 0.55 W/cm2 at 750 °C in peak power density and exhibits high durability for 300 h without noticeable degradation. Thus, our results demonstrate that the RAM process is a highly effective and ultra-fast mixing technology to produce high performance SOFC components.

Monolayer MoS2 layered crystals have attracted significant attention owing to their potential applicability in emerging devices, and chemical vapor deposition (CVD) is the best method so far to obtain monolayer MoS2 single crystals. Although many studies have been published on MoS2 monolayer crystals grown by CVD, there is a lack of understanding of its synthesis pathway. Therefore, in this paper, we studied the mechanism of the synthesis pathway when monolayer MoS2 crystals are synthesized by conventional CVD using MoO3 and sulfur powders. It was found that solid MoO2 produced by the reduction of MoO3 by sulfur plays a very important role in the synthesis of MoS2 layered crystals as an intermediate phase.

Solid oxide fuel cells (SOFCs) are attracting much attention as alternative energy conversion devices owing to their high energy conversion efficiency and fuel flexibility. Currently, Ni-based cermets or Ni-based bimetal are often being used as anode materials for SOFCs. However, in anode materials, metallic spherical particles generally agglomerate, which affects the electrode reaction under reduction conditions at high temperature. Furthermore, such agglomeration affects both microstructure of the electrode and the cell stability. To overcome this problem, in this study, we designed a bimetallic anode and fabricate it by electrospinning. This Ni-Fe fiber anode exhibits enhanced anodic activity and tolerance to coarsening of metallic particle compared to the Ni-Fe spherical powder. The ohmic and polarization resistance of Ni-Fe fiber anode is lower than Ni-Fe powder anode at all operation temperature. In addition, the single cell using Ni-Fe fiber anode shows higher maximum power densities of 0.40, 0.80, and 1.64 W/cm2 at 973, 1073, and 1173 K, respectively. Such enhanced power generation properties and lower resistance originated from continuous pathways for excellent charge transport pathways generated by electrospinning and the enhanced gas-diffusion properties of the nanofibers. These results demonstrate that the introduction of Ni-Fe fiber anode in SOFCs is an effective approach to enhance their power generation properties and stability.

A unique nanostructured NiO-yttria-stabilized zirconia (YSZ) composite is synthesized in-situ via a water-in-oil microemulsion technique for the solid oxide fuel cell (SOFC) anode. Thermogravimetric analysis and X-ray diffraction confirm that as-synthesized powders are crystallized in-situ at ∼500 °C as the distinct NiO and YSZ phases without any impurities. Moreover, transmission electron microscopy analysis reveals that the as-synthesized primary particles via microemulsion are ∼40 nm in size and have a characteristic structure in which NiO and YSZ nanograins are heterogeneously distributed. The electrochemical activity of the nanostructured NiO-YSZ composite is evaluated using an YSZ supported cell with a La0.8Sr0.2MnO3-δ-YSZ (50:50 wt.%) cathode. The maximum power density of the SOFC employing the microemulsion-mediated NiO-YSZ anode is 2.2 times greater than that of the SOFC with the conventionally ball-milled nano-sized NiO-YSZ anode. The higher performance with our nanocomposite NiO-YSZ anode is primarily attributed to its heterogeneous nanograin structure, thus leading to a significant increase in triple phase boundary densities.

There has been very little reported on ginsenoside composition and antioxidant activity of hydroponic-cultured ginseng roots (HCR), leaves (HCL), and stems (HCS). We profiled 6 ginsenoside compounds in HCR, HCL, and HCS using high-performance liquid chromatography. Antioxidative activity of HCR, HCL, and HCS were evaluated using total phenolic content (TPC) and total flavonoid content (TFC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) free-radical-scavenging activity assays, and ferric reducing antioxidant power (FRAP) assays. Total ginsenoside contents of HCL and HCS were significantly higher than that of HCR (P

Solid oxide cells (SOCs) have been reported as promising energy production and storage devices due to their high efficiency and low pollutant emissions. A key barrier to achieve high performance of SOCs is high electrode polarization resistance which attributes to the sluggish kinetics of oxygen reduction reactions (ORRs) and oxygen evolution reactions (OERs) at reduced temperatures. One of the potential oxygen electrodes is a perovskite La0.6Sr0.4Co0.2Fe0.8O3- δ(LSCF6428) with mixed ionic and electronic conduction (MIEC) because of its considerable conductivities and good chemical compatibility with conventional electrolyte materials such as ceria-based oxides. However, upon long-term operation under fuel cell conditions, the LSCF6428 electrode is usually subjected to severe degradation of ORR kinetics owing to chemical instability. It has been well known that the tailoring the chemical composition of the perovskite material strongly modulates their electrochemical activities and oxygen ion transport properties. In this study, we synthesized the La0.2Sr0.8Co0.8Fe0.2O3- δ (LSCF2882) and systematically investigated its characteristics on intrinsic properties. In addition, we evaluated oxygen transport kinetics and electrochemical performance of LSCF2882 as an oxygen electrode for reversible SOC applications.

To lower the carbon emission from the rising consumption of fossil fuels, electrochemical devices such as fuel cells and batteries, which can produce or store electricity from renewable resources, are attracting attention. Both systems require an electronically insulating solid membrane, which separates the cathode and anode to prevent short-circuiting. To improve the performance of porous electrodes, researchers have focused on tuning the electrode microstructure. The addition of highly ionic conducting materials to the electrode is commonly used to maximize the reaction site density. However, microstructural features, such as particle size distribution, electrochemically active site density and connectivity of each phase, are difficult to quantify only using conventionally used characterization methods such as scanning electron microscopy (SEM). One well-established method for obtaining three-dimensionally interconnected microstructural information is serial sectioning using a FIB/SEM dual beam system. Using this technique, more reliable and accurate quantification of the SOFC and ASSLIB electrodes microstructure are available. Also, the quantified features will be reflected in the responses of electrochemical impedance spectroscopy (EIS) measurements. These results can provide a link between them. Therefore, the aim of this study is to three-dimensionally reconstruct the microstructure of solid-state energy devices via FIB/SEM dual beam system and to quantify their microstructural features. Also, these results will be combined with the electrochemically analyzed properties to further understanding their relationship with microstructural properties.

벼 재배시 경운과 재배방법 따른 메탄 발생량 및 토양탄소함량변화를 구명하기위해 경운-이앙, 경운-무논점파, 최소경운-건답직파 및 무경운-건답직파를 비교하는 시험을 수행한 결과 다음과 같다. 1. 메탄 발생량은 경운-이앙 처리구에서 가장 많았으며 경운-무논점파>최소경운-건답직파=무경운 건답직파 순으로 적었다...

No-tillage dry-seeding of rice can offer potential benefits by reducing time and labor cost compared with conventional tillage practices. This study was conducted to investigate the effects of no-tillage dry-seeding on rice growth and soil hardness in comparison with other rice cultivation methods, machine transplanting and wet-hill-seeding on puddled paddy. The seedling stand fell within optimum range for both no-till dry-seeding and wet-hill-seeding on puddled paddy. Plant height, number of tillers and SPAD values in no-tillage dry-seeding cultivation were higher than those observed in other methods. There were no significant differences in grain yield of rice among three cultivation methods. The quality characteristics of milled rice grown in no-tillage dry-seeding were similar to those grown in other cultivation methods. Soil hardness in top 10 cm depth was significantly higher in no-tillage dry-seeding than other cultivation methods, while soil hardness below 10 cm depth was highest in machine transplanting cultivation. Results indicate that no-tillage dry-seeding practice is comparable to conventional tillage system in terms of seedling establishment, growth, yield and grain quality.

Ultra-fine Gd-doped ceria (GDC) powders were synthesized via co-precipitation using ammonium carbonate as the precipitant. The crystallite size of the resultant GDC powders was measured as ∼33 nm. The dilatometry test of the powder compacts and the relative density measurement of sintered pellets with various sintering temperatures revealed the synthesized nano-GDC powders had superior sinterability compared to commercial GDC powders (e.g., 96% vs 78% in relative density at 1300 °C, respectively). Based on the total conductivity measurement of the co-precipitated GDC via electrochemical impedance spectroscopy, we found there was an optimum sintering temperature range (1300–1400 °C) to achieve both high density and high conductivity due to significant increase in grain boundary resistance at higher temperature (1500 °C). Moreover, the nano-sized and highly sinterable co-precipitated GDC effectively enhanced oxygen reduction reaction at the La0.6Sr0.4Co0.2Fe0.8O3−δ/GDC composite cathode due to increase in active reaction sites as well as enhanced phase connectivity in 3D-bulk at lower sintering temperatures.

We develop a novel nanocomposite electrolyte, consisting of yttria-stabilized zirconia (YSZ) and erbia-stabilized bismuth oxide (ESB). The 20 mol% ESB-incorporated YSZ composite (20ESB-YSZ) achieves the high density (>97%) at the low sintering temperature of 800 °C. The microstructural analysis of 20ESB-YSZ reveals the characteristic nanocomposite structure of the highly percolated ESB phase at the YSZ grain boundaries (a few ∼ nm thick). The ionic conductivity of 20ESB-YSZ is increased by 5 times compared to that of the conventional YSZ due to the fast oxygen ion transport along the ESB phase. Moreover, this high conductivity is maintained up to 580 h, indicating high stability of the ESB-YSZ nanocomposite. In addition, the oxygen reduction reaction at the composite electrolyte/cathode interface is effectively enhanced (∼70%) at the temperature below 650 °C, mainly due to the fast dissociative oxygen adsorption on the ESB surface as well as the rapid oxygen ion incorporation into the ESB lattice. Thus, we believe this ESB-YSZ nanocomposite is a promising electrolyte for high performance solid oxide fuel cells at reduced temperatures.

This study was carried out to find optimal rice varieties and selection index for sushi. The suitability tests about appearance and palatability were conducted by 31 professional sushi chefs and the physicochemical and pasting properties of the selected 7 rice varieties (Koshihikari, Dami, Deuraechan, Boramchan, Juanbyeo, Sindongjin and Hopum) of milled and cooked rice were evaluated. According to the adaptability for sushi shape and taste of rice, Hopum and Sindongjin showed more suitable appearance and taste than others. Also, they showed remarkable pasting properties similar to Koshihikari which is widely known as a suitable for sushi. In the relationship between suitability and pasting properties for sushi, peak viscosity and breakdown viscosity showed highly positive correlation, and setback viscosity showed negative correlation. These results suggest that pasting properties can be applied to select the suitable varieties for sushi.

This paper presents a group based propagation method for multi-hop transmission, in order to deliver an emergency message to the reasonable size of vehicle troop. A group head is selected in considering of the position information of vehicles and radio transmission range. With benefits of the group based transmission, it is possible to minimize the unnecessary transmissions and the possibility of message collisions. We evaluate the performance of the proposed scheme compared with conventional schemes. Simulation results show that the message propagation performance is so stable regardless of vehicle`s congestion degree.

An engineering scale test, which is called KENTEX, was carried out to understand and to analyze the coupled thermal, hydrological and mechanical phenomena in the engineered barrier system(EBS) of Korean reference disposal system. Using the experimental data obtained from KENTEX, the water saturation processes in bentonite could be analyzed. From the comparison between the model calculation using ABAQUS and the experimental results, the difference of the water content between them in the unsaturating part was large because the drying phenomena due to moisture redistribution by the temperature gradient could not be included in the model. In the saturating part, the difference of the water content between them was decreased gradually and showed to be small in the full saturation. And the time of about 95% saturation could be estimated about 500 days from the model calculation and experimental results. Also it could be known that the moisture redistribution in the unsaturated part could not be affected on the saturation time of bentonite in the repository. Therefore, it is considered that this model could be used to quantitatively predict the water saturation time in bentonite as EBS for the disposal system.

Purpose: This study is conducted to develop a crisis intervention program for suicide attempters in psychiatric inpatients, and to evaluate its effectiveness. Methods: The program was developed based on cognitive behavioral therapy. A single group pre-post test design was used with 15 patients admitted to a psychiatric unit for suicide attempt to evaluate the effectiveness on suicide ideation, depression, hopelessness, and problem solving ability. Data were analyzed using SPSS/WIN program. Results: The developed program was composed of six sessions; orientation and contraction, assessment of suicide risk factors and protect factors, safety planning, reconstruction of negative cognition, enhancing problem solving ability, empowering hope. The crisis intervention program significantly decreased depression (Z=3.35, p=.001), hopelessness (Z=2.92, p=.003), suicide ideation (Z=2.92, p=.003), and improved problem solving skill (Z=-1.99, p=.046). Conclusion: The developed crisis intervention was an effective cognitive behavior therapy which could decrease depression, hopelessness, and suicide ideation, as well as increase problem solving skill when applied to hospitalized suicide attempters.

Purpose:Thepurposeofthisstudywastoevaluatetheeffectsof acommunicationcoursewithlecture, smallgroup activityandmusic therapy fornursingstudents,comparedtoa conventional lecturecourse.Methods:Thedesign of this studywas anonequivalent control group witha pre-post test. Data were collectedbyquestionnaires from 166nursingstudentsfromY University,Seoul, Korea, with92intheexperimentalgroupand74inthecontrolgroup. A 13 session program with lecture, small group activity and music therapy was given to the experimental group in2008,while aconventionallecturecoursewasgiven tothecontrol groupin2007.Thedatawereanalyzedusing descriptivestatistics,andindependent/pairedt-tests.Results:Therewerenosignificantdifferencesininterpersonal communicationsor relationshipschangebetweentheexperimental andcontrol group. Wefoundthat whicharea in interpersonal communication and relationships had a positive effect in each course. Conclusion:The results indicate a need to consider the characteristics of students and thoroughly prepare for operational difficulties in advanceof effectivelyadministeringvariousinstructionalmethodsincommunicationcoursesfor nursing students in the second year.