Search

Objectives: To report three-dimensional (3-D) movement of teeth adjacent to single-implant crowns (SICs) in the anterior maxilla and to relate the findings to patient characteristics and esthetic outcome. Materials and Methods: 3-D movements of teeth adjacent to anterior maxillary SICs were measured in 30 patients with original SICs in function after 14-20 years. The movements were related to facial type, lower anterior facial height (LAFH), age at crown delivery, sex, the position of the implant, implant occlusion, cause of tooth loss, follow-up period, orthodontic treatment prior to implant placement, and marginal bone-level changes. The esthetic outcome and quality were assessed using Visual Analog scale (VAS) and California Dental Association (CDA) index. Results: 3-D movement of adjacent teeth between 0 and 2.5 mm was observed at follow-up with incisal and palatal movement being most pronounced. Incisal tooth movement of >1 mm was observed in 30% of the patients and was significantly associated with LAFH ≥70 mm. VAS rating associated poorly between patients and clinicians with scores of >80% in 63% and 20%, respectively. The CDA rating was assessed as satisfactory in 87% of the patients. Conclusions: Significantly more extensive infraposition was observed in patients with SICs without occlusion, other causes of tooth loss than trauma, implant in lateral incisor and canine position, and a LAFH of ≥70 mm. Although infraposition occurs, patients are highly satisfied with the esthetics of their implants and the esthetic results are valued as higher by patients than dentists.

Objectives. The purpose of this study was to investigate if edentulism is associated with all-cause mortality. The aims were to analyze the association between age, socioeconomic factors, and mortality in edentulous patients treated with either removable dentures or implant-supported prostheses. Methods. All patients who became edentulous according to the Swedish Social Insurance Agency (SSIA) between 2009 and 2013 (N = 8463) were analyzed regarding prosthetic treatment, age, gender, and socioeconomic status. The patients were divided into two groups, depending on whether they were treated with dental implants (implant group; IG) or with conventional removable dentures (denture group; DG). Data on mortality for all included individuals were obtained from the Swedish National Cause of Death Register and compared to a reference population. Cumulative survival rates were calculated, and a multivariable regression analysis for the included variables was performed. Results. Between 2009 and 2018, 2192 of the patients (25.9%) were treated with implant-supported dental prostheses (IG) and 6271 patients (74.1%) were treated with removable dentures without support of dental implants (DG). Altogether 2526 patients (30%) died until December 31, 2019, and the overall mortality was significantly higher for the DG compared to the IG during follow-up (p<0.001). Younger edentulous patients (<= 59 years) presented a higher mortality than the reference population, while implant patients over 79 years of age demonstrated a lower mortality. The final results from the multivariable logistic analysis showed that lower equalized disposable income (EDI) and the choice of conventional removable dentures are the most important factors for increased patient mortality (p<0.001). Conclusions. Edentulous patients have an overall higher mortality compared to a reference population. Low socioeconomic status increases all-cause mortality. Individuals treated with dental implant, Funding Agencies|Nobel Biocare Zurich, Switzerland; Wilhelm and Martina Lundgren Foundation; Hjalmar Svenssons Research Foundation; Sylvan Foundation

Background. Previous research has reported an association between tooth loss and patient mortality, while the cause of death has not been elucidated. Objective. The purpose was to describe and compare the cause of death in implant patients treated consecutively in the edentulous arch with a reference population. Methods. Altogether, 3902 patients were included between 1986 and 2014. Data on the causes of death for deceased patients were compared to the Swedish National Cause of Death Register for a comparable time period. Standardised mortality ratios (SMRs) were calculated based on gender and age and tested for statistical significance. Results. Most deceased patients (2,098) died from diseases in the circulatory system (CVD; 42%) and from cancers (26%). SMR indicated a generally increased mortality (total group) compared to the reference population during inclusion (P amp;lt; 0.05; 1986-2014). Patients treated early (1986-1996) showed a lower SMR compared to patients treated later (P amp;lt; 0.05; 1997-2014) especially related to CVDs. Younger patients (amp;lt;60 years at surgery) showed an increased mortality due to CVDs when treated late (1997-2014; SMR = 5.4, P amp;lt; 0.05). Elderly patients (amp;gt;79 years at surgery) showed a significantly lower mortality in almost all observed causes of death (1986-2014; P amp;lt; 0.05) with also a significantly lower mortality due to CVDs during the early period (1986-1996; SMR = 0.3, P amp;lt; 0.05). Conclusion. An overall increased mortality was observed for the edentulous implant patient compared to the reference population. Elderly patients (amp;gt;79 years) showed significantly lower mortality for all causes of death independent of the time period of implant surgery. Younger patients (amp;lt;60 years) present an increased risk for early mortality related to CV D. SMR for all causes of death increased for patients treated late (1997-2014) as compared to patients treated early (1986-1996)., Funding Agencies|Nobel Biocare AB, Sweden; Sylvan Foundation; Wilhelm and Martina Lundgren Foundation; Hjalmar Svenssons Research Foundation

BACKGROUND: Placement of single implants is one of the most common applications for implant treatment. Millions of patients have been treated worldwide with osseointegrated implants and many of these patients are treated at a young age with a long expected remaining lifetime. Therefore longterm evidence for such treatment is important. AIM: To report patient treatment, implant and implant-supported single crown survival over at least a 10-year period of follow-up. MATERIAL AND METHODS: After reviewing long-term publications, included by Jung et al (2012), a complementary PubMed search was performed using the same search strategy for the period September 2011 to November 2014. Data on implant and single implant crown treatment survival were compiled from included studies. RESULTS: Four new publications were identified from the 731 new titles. They were added to an earlier list of five manuscripts by Jung et al (2012) , which were already included. Accordingly, nine publications formed the database of available long-term evaluations. The database consisted of 421 patients altogether, provided with 527 implants and 522 single crowns. From the 367 patients that were followed-up for at least 10 years (87%), altogether 502 implants were still in function at the completion of the studies (95.3%), supporting 432 original and 33 remade single implant crowns. Based on patient level and implant level data, implant survival reached 93.8% and 95.0%, respectively. The corresponding survival rate for original crown restorations was 89.5%. CONCLUSIONS: Single implant treatment is a predicable treatment over a 10-year period of time, with no indication of obvious changes in implant failure rate between 5 and 10 years. However, replacement of new single crowns must be considered during the follow-up as part of regular maintenance. Compared to the number of treated patients worldwide, the available numbers with a follow-up of 10 years was low.

Objective. To evaluate the influence of reimbursement system and organizational structure on oral rehabilitation of adult patients with tooth loss. Materials and methods. Patient data were retrieved from the databases of the Swedish Social Insurance Agency. The data consisted of treatment records of patients aged 19 years and above claiming reimbursement for dental care from July 1, 2007 until June 30, 2009. Before July 1, 2008, a proportionately higher level of subsidy was available for dental care in patients 65 years and above, but thereafter the system was changed, so that the subsidy was the same, regardless of the patient's age. Prosthodontic treatment in patients 65 years and above was compared with that in younger patients before and after the change of the reimbursement system. Prosthodontic treatment carried out in the Public Dental Health Service and the private sector was also analyzed. Results. Data were retrieved for 722,842 adult patients, covering a total of 1,339,915 reimbursed treatment items. After the change of the reimbursement system, there was a decrease in the proportion of items in patients 65 years and above in relation to those under 65. Overall, there was a minimal change in the proportion of treatment items provided by the private sector compared to the public sector following the change of the reimbursement system. Conclusions. Irrespective of service provider, private or public, financial incentive such as the reimbursement system may influence the provision of prosthodontic treatment, in terms of volume of treatment.

Objective: To conduct a systematic review and meta-synthesis of qualitative studies addressing patients' perceptions of loss of teeth, edentulism and oral rehabilitation. Background: Qualitative studies can complement quantitative studies by achieving deep understanding of patients' subjective experiences of losing teeth and coping with edentulism. They can also explore the perception that the benefits of prosthetic rehabilitation extend far beyond primary clinical treatment goals of restoration of oral function. Materials and methods: The major data bases were searched extensively for relevant qualitative and quantitative studies, followed by manual searching of the reference lists of included publications. Two authors independently read all abstracts. Relevant papers were retrieved in full-text and included or excluded according to a specially designed protocol. The included articles were then appraised and rated for quality: high, moderate or low. Articles of low quality were excluded. Results: The database search yielded 36 abstracts of qualitative studies; manual search disclosed one further article. All were read in full-text by two independent authors: 28 were excluded. Of the remaining nine, two (assessed as of low quality) were excluded for further analysis. Meta-synthesis, based on seven studies, disclosed two major themes: loss of quality-of-life associated with losing teeth and restored quality-of-life after oral rehabilitation. Conclusions: In this relatively new field of research, there are few published papers. Nevertheless, the studies to date show that loss of teeth is associated not only with compromised oral function, but also loss of social status and diminished self-esteem. Oral rehabilitation has broad positive implications, restoring quality of life and self-worth.

Background: Comparisons between different techniques measuring fit of implant-supported frameworks are few. Purpose: The purpose of this study was to compare data on precision of fit from two highly accurate measuring techniques and, also, to compare results using software programs for fit assessments considering both a “virtual” as well as a “physical” (i.e., more clinical) situation. Materials and Methods: Five computer numerical control-milled titanium frameworks (Procera® Implant Bridge, Nobel Biocare AB, Göteborg, Sweden) were fabricated from individual model/pattern measurements, simulating a clinical situation. Measurements of fit between frameworks and models were performed by means of a coordinate measuring machine (CMM; Zeiss Prismo Vast, Carl Zeiss Industrielle Messtechnik GmbH, Oberkochen, Germany) linked to a computer and an optical, high-resolution, three-dimensional scanner (Atos 4M SO, GOM International AG, Widen, Switzerland). Collected data on distortions between frameworks and models were analyzed and compared between the two measurement techniques. A comparison between “virtual” and “physical” fit assessments was also performed, based on data from the three-dimensional scanner. Results: When using “virtual” fit assessment programs, overall mean three-dimensional distortion between implant and framework center points in absolute figures was 37 (SD 22) and 14 µm (SD 8) for the CMM and three-dimensional scanning measurements, respectively. Corresponding mean three-dimensional distortion when using a “physical” fit assessment program in the scanner was 43 µm (SD 24) (p < 0.001). Mean horizontal (x-axis) measurements of the distance between the two terminal implants of the models and the frameworks were 33.772 and 33.834 mm for the CMM technique. Corresponding measurements for the three-dimensional scanner was 33.798 and 33.806 mm, respectively. Horizontal distances from the three-dimensional scanner were, for most measurements, greater than for th

Purpose: The purpose of this systematic review was to identify and critically appraise published studies of treatment methods used in general practice to rehabilitate adult patients with single tooth loss or partial edentulism, with special emphasis on outcomes reported after at least 5 years of follow-up. Materials and Methods: Three databases were searched using specified indexing terms. Publications were included if the study design, research questions, and sample size satisfied pre-established criteria. Reference lists of relevant publications and systematic reviews were also searched. The quality of evidence was classified according to the GRADE system as high, moderate, low, or very low. Results: The search yielded 7,675 titles, of which 1,130 were read in full text. A final total of 15 publications were deemed eligible for inclusion: 5 of moderate quality and 10 of low quality. The five studies of moderate quality were all related to implant-based treatment. The 5-year survival rates for implant-supported single crowns and prostheses were 91% and 94.7%, respectively (implant survival rates: 98.5% and 94.9%, respectively). The underlying scientific evidence was low in quality. No relevant publications were identified regarding the economic aspects of treatment. Conclusion: Due to the low scientific evidence of the included studies, it was not possible to compare various treatment methods used for rehabilitation of single tooth loss or partial edentulism.

Purpose: This study aimed to review published quantitative studies for evidence regarding the influence of oral rehabilitation following total or partial tooth loss on self-perceived oral health-related quality of life (OHRQoL). Materials and Methods: Three databases were searched using specified indexing terms. The reference lists of relevant publications were also searched manually. Quality of evidence was classified according to GRADE guidelines as high, moderate, low, or very low. Results: The search yielded 2,138 titles and abstracts, 2,102 of which were of a quantitative study design. Based on pre-established criteria, the full-text versions of 322 articles were obtained. After data extraction and interpretation, 5 publications of high or moderate study quality remained. The results of these 5 studies showed positive effects of oral rehabilitation on OHRQoL. Two studies showed substantial improvements. Conclusions: This is a relatively new field of research; there are very few quantitative studies of how patients perceive OHRQoL following tooth loss and subsequent rehabilitation. While this review indicates that treatment has positive effects on quality of life, the scientific basis is insufficient to support general conclusions about the influence of various interventions on the OHRQoL of patients who have experienced total or partial tooth loss. To achieve a more comprehensive analysis, it is recommended that future studies be based on a combination of quantitative and qualitative methods, ie, questionnaires and semi-structured interviews. The follow-up period must also be appropriate for the specific intervention studied.

Purpose: This study aimed to evaluate the outcomes of treatment methods used to rehabilitate adult patients with maxillary and/or mandibular edentulism after at least 5 years of follow-up. The risks, adverse effects, and cost effectiveness of these methods were also evaluated. Materials and Methods: Three databases as well as the reference lists of included publications were searched using specified indexing terms. Publications that met the inclusion criteria were read and interpreted using pre-established protocols. Quality of evidence was classified according to the GRADE system (high, moderate, low, or very low). Results: The search yielded 2,130 titles and abstracts. Of these, the full-text versions of 488 publications were obtained. After data extraction and interpretation, 10 studies with moderate study quality of evidence and 1 study with low quality of evidence regarding outcomes, risks, and adverse effects remained. Three studies on the economic aspects of treatment were also included (1 with moderate quality and 2 with low quality). Low-quality evidence showed that the survival rate of implant-supported fixed prostheses is 95% after 5 years in patients with maxillary edentulism and 97% after 10 years in patients with mandibular edentulism. The survival rate of implant-supported overdentures is 93% after 5 years (low-quality evidence). In implant-supported fixed prostheses, 70 of every 1,000 implants are at risk of failing in the maxilla after 5 years and 17 of every 1,000 implants in the mandible are at risk after 10 years. Regarding economic aspects, the evidence was insufficient to provide reliable results. Conclusions: Due to the low quality of evidence found in the included studies, further research with a higher quality of evidence is recommended to better understand the outcomes of treatment for patients with maxillary and/or mandibular edentulism.

PURPOSE: Long-term comparisons of frameworks at the implant or abutment level are not available, and knowledge of the clinical function of cobalt-chromium (Co-Cr) alloy frameworks is limited. Primarily, the aim of this study was to compare the 5-year clinical performance of frameworks with or without abutment connections to implants. Secondly, the outcomes of prostheses made from Co-Cr alloy with porcelain veneers to those made of commercially pure titanium (CP Ti) with acrylic veneers were compared. MATERIALS AND METHODS: The test groups comprised patients treated with screw-retained fixed prostheses made at the implant level according to the Cresco method in either dental porcelain-veneered Co-Cr alloy (n = 15) or acrylic-veneered CP Ti (n = 25). A control group of 40 randomly selected patients were provided with prostheses made at the standard abutment level in CP Ti with acrylic veneers. For all patients, clinical and radiologic 5-year data were retrospectively collected and evaluated. RESULTS: Five-year implant cumulative survival rates (CSRs) were 98.6% and 97.6% for test and control groups, respectively (P > .05). No major differences in bone level were demonstrated between the groups after 5 years (P > .05). Significantly more complications occurred in the test groups compared to the control group (P < .01), with the most common complications being mucositis and fracture of veneers. CONCLUSIONS: After 5 years, the clinical outcomes of implant-level prostheses made of porcelain-veneered Co-Cr or acrylic-veneered CP Ti seem comparable to acrylic-veneered titanium prostheses made at the standard abutment level regarding implant CSR and bone levels. However, more complications were registered in implant-level prostheses compared to the standard abutment-level prostheses.

Background: New computer numeric controlled (CNC)-milled frameworks for implant-supported prostheses have been introduced. However, no data are available on the precision of fit of these new frameworks. Purpose: The purpose of this study is to evaluate the precision of fit of a new CNC-milled framework technique (I-Bridge, Biomain AB, Helsingborg, Sweden) using Brånemark System (Nobel Biocare AB, Göteborg, Sweden) and NobelReplace (Nobel Biocare AB) system implants. Materials and methods: Ten test frameworks were fabricated for one master model for each implant system. Five additional frameworks were fabricated for five different models simulating clinical cases as controls (Brånemark System). The distortion of implant center point positions was measured in x-, y-, and z-axes and in three dimensions by using a contact-type coordinate measuring machine and a computer program developed specifically for this purpose. Mann-Whitney U-test was used to compare differences of distortion within and between the groups. Results: The maximal distortion in arch width (x-axis) and curvature (y-axis) was within 71 and 55 microm for all frameworks, respectively. The mean distortion in absolute figures in x-, y-, z-axes and three dimensions was for "clinical control" frameworks 23, 26, 4, and 34 microm as compared with less than 12, 12, 2, and 17 microm for Brånemark and NobelReplace frameworks, respectively. Control frameworks showed significantly (p < .05) greater mean and range of distortions in x- and y-axes and in three dimensions compared with test frameworks. Conclusion: All measured frameworks presented signs of misfit, indicating that no framework had a "passive fit." Frameworks produced in a more routine clinical environment seem to present greater levels of distortion as compared with frameworks produced in a strict test situation. However, all measured frameworks presented levels of precision of fit within limits considered to be clinically acceptable in earlier studi, Funding Agencies:HOGANAS ABStatisticon AB Public Dental Health Service, Orebro County Council

BACKGROUND: The Cresco™ (Astra Tech AB, Mölndal, Sweden) method aims to reduce the inevitable distortions when cast metal frameworks for implant-supported prostheses are fabricated. However, limited data are available for the precision of fit for this method. PURPOSE: To measure and compare the precision of fit of Cresco- and computer numeric controlled (CNC)-milled metal frameworks for implant-supported fixed complete prostheses. MATERIALS AND METHODS: Two groups of frameworks were fabricated according to the Cresco method, either in titanium (Cresco-Ti, n = 10) or in a cobalt-chrome alloy (Cresco-CoCr, n = 10). A third group comprised CNC-milled titanium frameworks (Procera® Implant Bridge [PIB], Nobel Biocare AB, Göteborg, Sweden), made from individual model/pattern measurements (PIB, n = 5). Measurements of fit were performed by means of a coordinate measuring machine linked to a computer. The collected data on distortions were analyzed. RESULTS: Overall, a maximal three-dimensional range of center point distortion of 279 µm was observed for measured frameworks. The framework width (x-axis) decreased for Cresco-CoCr, but increased in Cresco-Ti and PIB; Cresco-CoCr compared to Cresco-Ti (p = .0002) and Cresco-CoCr compared to PIB (p < .0001). In vertical dimension (z-axis), less distortions were present in PIB compared to Cresco-CoCr (p = .0007) and in PIB compared to Cresco-Ti (p < .0001). CONCLUSIONS: None of the frameworks presented a perfect, completely "passive fit" to the master. Although the direction of distortions varied, the horizontal distortions were of similar magnitudes. However, the PIB frameworks had statistical significant less vertical distortions as compared to the Cresco groups.