Search

In order to make accurate inferences about the solar interior using helioseismology, it is essential to understand all the relevant physical effects on the observations. One effect to understand is the (complex-valued) ratio of the horizontal to vertical displacement of the p- and f-modes at the height at which they are observed. Unfortunately, it is impossible to measure this ratio directly from a single vantage point, and it has been difficult to disentangle observationally from other effects. In this paper we attempt to measure the ratio directly using 7.5 hours of simultaneous observations from the Polarimetric and Helioseismic Imager on board Solar Orbiter and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory. While image geometry problems make it difficult to determine the exact ratio, it appears to agree well with that expected from adiabatic oscillations in a standard solar model. On the other hand it does not agree with a commonly used approximation, indicating that this approximation should not be used in helioseismic analyses. In addition, the ratio appears to be real-valued., Comment: Accepted for publication in Astronomy & Astrophysics. 8 pages, 8 figures

Full list of authors: Kahil, F.; Hirzberger, J.; Solanki, S. K.; Chitta, L. P.; Peter, H.; Auchère, F.; Sinjan, J.; Orozco Suárez, D.; Albert, K.; Albelo Jorge, N.; Appourchaux, T.; Alvarez-Herrero, A.; Blanco Rodríguez, J.; Gandorfer, A.; Germerott, D.; Guerrero, L.; Gutiérrez Márquez, P.; Kolleck, M.; del Toro Iniesta, J. C.; Volkmer, R. ; Woch, J.; Fiethe, B.; Gómez Cama, J. M.; Pérez-Grande, I.; Sanchis Kilders, E.; Balaguer Jiménez, M.; Bellot Rubio, L. R.; Calchetti, D.; Carmona, M.; Deutsch, W.; Fernández-Rico, G.; Fernández-Medina, A.; García Parejo, P.; Gasent-Blesa, J. L.; Gizon, L.; Grauf, B.; Heerlein, K.; Lagg, A.; Lange, T.; López Jiménez, A.; Maue, T.; Meller, R.; Michalik, H.; Moreno Vacas, A.; Müller, R.; Nakai, E.; Schmidt, W.; Schou, J.; Schühle, U.; Staub, J.; Strecker, H.; Torralbo, I.; Valori, G.; Aznar Cuadrado, R.; Teriaca, L.; Berghmans, D.; Verbeeck, C.; Kraaikamp, E.; Gissot, S.-- This is an Open Access article, published by EDP Sciences, under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited., Context. The Extreme Ultraviolet Imager (EUI) on board the Solar Orbiter (SO) spacecraft observed small extreme ultraviolet (EUV) bursts, termed campfires, that have been proposed to be brightenings near the apexes of low-lying loops in the quiet-Sun atmosphere. The underlying magnetic processes driving these campfires are not understood. Aims. During the cruise phase of SO and at a distance of 0.523 AU from the Sun, the Polarimetric and Helioseismic Imager on Solar Orbiter (SO/PHI) observed a quiet-Sun region jointly with SO/EUI, offering the possibility to investigate the surface magnetic field dynamics underlying campfires at a spatial resolution of about 380 km. Methods. We used co-spatial and co-temporal data of the quiet-Sun network at disc centre acquired with the High Resolution Imager of SO/EUI at 17.4 nm (HRIEUV, cadence 2 s) and the High Resolution Telescope of SO/PHI at 617.3 nm (HRT, cadence 2.5 min). Campfires that are within the SO/PHI−SO/EUI common field of view were isolated and categorised according to the underlying magnetic activity. Results. In 71% of the 38 isolated events, campfires are confined between bipolar magnetic features, which seem to exhibit signatures of magnetic flux cancellation. The flux cancellation occurs either between the two main footpoints, or between one of the footpoints of the loop housing the campfire and a nearby opposite polarity patch. In one particularly clear-cut case, we detected the emergence of a small-scale magnetic loop in the internetwork followed soon afterwards by a campfire brightening adjacent to the location of the linear polarisation signal in the photosphere, that is to say near where the apex of the emerging loop lays. The rest of the events were observed over small scattered magnetic features, which could not be identified as magnetic footpoints of the campfire hosting loops. Conclusions. The majority of campfires could be driven by magnetic reconnection triggered at the footpoints, similar to the physical processes occurring in the burst-like EUV events discussed in the literature. About a quarter of all analysed campfires, however, are not associated to such magnetic activity in the photosphere, which implies that other heating mechanisms are energising these small-scale EUV brightenings. © F. Kahil et al. 2022., Solar Orbiter is a space mission of international collaboration between ESA and NASA, operated by ESA. We are grateful to the ESA SOC and MOC teams for their support. The German contribution to SO/PHI is funded by the BMWi through DLR and by MPG central funds. The Spanish contribution is funded by FEDER/AEI/MCIU (RTI2018-096886-C5), a “Center of Excellence Severo Ochoa” award to IAA-CSIC (SEV-2017-0709), and a Ramón y Cajal fellowship awarded to DOS. The French contribution is funded by CNES. The EUI instrument was built by CSL, IAS, MPS, MSSL/UCL, PMOD/WRC, ROB, LCF/IO with funding from the Belgian Federal Science Policy Office (BELSPO/PRODEX PEA 4000112292); the Centre National d’Etudes Spatiales (CNES); the UK Space Agency (UKSA); the Bundesministerium für Wirtschaft und Energie (BMWi) through the Deutsches Zentrum für Luft- und Raumfahrt (DLR); and the Swiss Space Office (SSO).

The Banda Primitiva de Llíria is presented as an open heritage resource, which has been built on the uses, values and symbols assigned to it by the local town of Llíria and its inhabitants over the musical society’s two centuries of history. This work focuses on analysing how this musical phenomenon contributes to positioning creativity and cultural industries at the centre of local development, reinforcing the identity elements of Llíria and the Valencian Region. It intends to support the safeguarding, respect and awareness of one of the oldest civic bands in Spain, providing greater visibility and creating positive recognition of the fundamental importance of this form of intangible cultural heritage for social cohesion and development, in an environment that is transformed into one of collective action, shared culture and creativity.

The XGIS (X and Gamma Imaging Spectrometer) is one of the three instruments onboard the THESEUS mission (ESA M5, currently in Phase-A). Thanks to its wide field of view and good imaging capabilities, it will efficiently detect and localize gamma-ray bursts and other transients in the 2-150 keV sky, and also provide spectroscopy up to 10 MeV. Its current design has been optimized by means of scientific simulations based on a Monte Carlo model of the instrument coupled to a state-of-the-art description of the populations of long and short GRBs extending to high redshifts. We describe the optimization process that led to the current design of the XGIS, based on two identical units with partially overlapping fields of view, and discuss the expected performance of the instrument., Comment: Proceedings of the SPIE 2020, paper 11444-276

Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray; Virtual, Online; United States; 14 December 2020 through 18 December 2020; Code 166330.--Proceedings of SPIE - The International Society for Optical Engineering Volume 11444, 2020, Article number 114448S.--Full list of authors: Gasent-Blesa, J. L.; Reglero, V.; Connell, P.; Pinazo-Herrero, B.; Navarro-González, J.; Rodríguez-Martínez, P.; Castro-Tirado, A. J.; Caballero-García, M. D.; Amati, L.; Labanti, C.; Mereghetti, S.; Frontera, F.; Campana, R.; Orlandini, M.; Stephen, J.; Terenzi, L.; Evangelisti, F.; Squerzanti, S.; Melchiorri, M.; Fuschino, F. De Rosa, A.; Morgante, G., Within the scientific goals of the THESEUS ESA/M5 candidate mission, a critical item is a fast (within a few s) and accurate (, THESEUS/XGIS instrument is supported by: the ASI-INAF Agreement n. 2018-29-HH.0; the OHB Italia/INAF-OASBo Agreement n.2331/2020/01; the European Space Agency ESA through the M5/NPMC Programme; the AHEAD2020 project funded by the UE through H2020-INFRAIA-2018-2020; the Spanish Ministerio de Ciencia e Innovaci?n, PID2019 109269RB-C41; the Polish National Science Centre, Project 2019/35/B/ST9/03944 and Foundation for Polish Science, Project POIR.04.04.00-00-5C65/17-00. The authors thank all the members of the THESEUS team involved in the development of XGIS instrument.

Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray; Virtual, Online; United States; 14 December 2020 through 18 December 2020; Code 166330.--Proceedings of SPIE - The International Society for Optical Engineering Volume 11444, 2020, Article number 114442K.--Full list of authors: Labanti, C.; Amati, L.; Frontera, F.; Mereghetti, S.; Gasent-Blesa, J. L.; Tenzer, C.; Orleanski, P.; Kuvvetli, I.; Campana, R.; Fuschino, F.; Terenzi, L.; Virgilli, E.; Morgante, G.; Orlandini, M.; Butler, R. C.; Stephen, J. B.; Auricchio, N.; De Rosa, A.; Da Ronco, V.; Evangelisti, F. Melchiorri, M.; Squerzanti, S.; Fiorini, M.; Bertuccio, G.; Mele, F.; Gandola, M.; Malcovati, P.; Grassi, M.; Bellutti, P.; Borghi, G.; Ficorella, F.; Picciotto, A.; Zanini, V.; Zorzi, N.; Demenev, E.; Rashevskaya, I.; Rachevski, A.; Zampa, G.; Vacchi, A.; Zampa, N.; Baldazzi, G.; La Rosa, G.; Sottile, G.; Volpe, A.; Winkler, M.; Reglero, V.; Connell, P. H.; Pinazo-Herrero, B.; Navarro-González, J.; Rodríguez-Martínez, P.; Castro-Tirado, A. J.; Santangelo, A.; Hedderman, P.; Lorenzi, P.; Sarra, P.; Pedersen, S. M.; Tcherniak, D.; Guidorzi, C.; Rosati, P.; Trois, A.; Piazzolla, R., THESEUS (Transient High Energy Sky and Early Universe Surveyor) is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Soft X-ray Imager, SXI, 0.3 - 5 keV), a hard X-ray, partially-imaging spectroscopic instrument (X and Gamma Imaging Spectrometer, XGIS, 2 keV - 10 MeV), and an optical/near-IR telescope with both imaging and spectroscopic capability (InfraRed Telescope, IRT, 0.7 - 1.8 µm). The spacecraft will be capable of performing fast repointing of the IRT to the error region provided by the monitors, thus allowing it to detect and localize the transient sources down to a few arcsec accuracy, for immediate identification and redshift determination. The prime goal of the XGIS will be to detect transient sources, with monitoring timescales down to milliseconds, both independently of, or following up, SXI detections, and identify the sources performing localisation at, The Phase A study of the THESEUS/XGIS instrument is supported by ASI-INAF Agreement n. 2018-29-HH.0, OHB Italia/ - INAF-OASBo Agreement n.2331/2020/01, by the European Space Agency ESA through the M5/NPMC Programme and by the AHEAD2020 project funded by UE through H2020-INFRAIA-2018-2020. By the Spanish Ministerio de Ciencia e Innovación, PID2019-109269RB-C41. By Polish National Science Center, Project 2019/35/B/ST9/03944 and Foundation for Polish Science, Project POIR.04.04.00-00-5C65/17-00.

“© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.”, This paper presents the thermal design of the electronics unit of the instrument Polarimetric Helioseismic Imager, onboard the European Space Agency mission Solar Orbiter. The thermal design procedure, along with the problems encountered during this design phase, and the solutions found to fix them are described, proving in this way the thermal feasibility and robustness of the unit. Its final thermal behaviour, obtained from thermal analyses correlated with data from thermal tests performed in a vacuum environment, is presented. © 1965-2011 IEEE., This work was supported by the Spanish Ministerio de Economia y Conipetitividad under Grant ESP2014-56169-C6-1-R, Grant ESP2014-56169C6-4-R; Grant ESP2014-56169-C6-6-R, Grant ESP2016-77548-05-1-R, Grant ESP2016-77548-05-3-R and Grant ESP2016-77548-05-5-R. The work of.1. Piqueras was supported by the Grant FPU15/0561S "Formacitin do Profesorado Universitario" from the Spanish Ministerio do Educacion; Cultura y Deporte.

Coupling output inductors is a very popular solution when designing a multiple-output DC/DC system. Space-borne circuits are one of the areas where a custom DC/DC converter design with coupled inductors could be preferred to have a detailed design of all variables. Output voltage regulation can be improved using coupled output inductors on a multiple-output DC/DC converter, and, as demonstrated in this paper, it provides an enhanced stability. This paper presents the small signal analysis of a push-pull converter with seven outputs having all its output inductors coupled together and compares it theoretically to the uncoupled version to demonstrate the stability improvement. The theoretical results are validated by simulating a linear model of the circuit and measuring the frequency response on an experimental prototype. Design guidelines and additional benefits of output-coupled inductors are also listed.

This paper calculates the failure rate on reversed polarized silicon diodes with the aim to justify, experimentally, the rules of the European Space Agency (ESA) which are referred to the component life’s extension, the reliability increase and the end of life performance enhancement, by using oversized devices (derating rules). In order to verify the derating rules, 80 silicon diodes are used, which are reverse polarized in a high temperature environment. The diodes are divided in 4 groups of 20 diodes, applying a different voltage to each group, in order to relate the failure rate to the applied derating rule. The experiment described in this paper is developed using a temperature accelerated test to check the leakage current in reverse polarization (HTRB - High Temperature Reverse Bias), with the purpose of obtaining results applying an acceleration factor in order to reduce the test duration. By using a thermal model of the whole system and the equations that describe the reverse polarized diode behaviour, it is possible to stress the 80 diodes up to very high temperature avoiding the runaway effect. Finally, the failure rate is calculated and a revision of the derating rules are proposed by using the experimental result obtained.

We present a software simulator for the modeling of astronomical instrumentation, which includes platform effects and software processing. It is an end-to-end simulator, from the entrance of the telescope to the data acquisition at the detector, along with software blocks dealing, e.g., with demodulation, inversion, and compression. Developed following the Solar Orbiter/Polarimetric and Helioseismic Imager (SO/PHI) instrument, it comprises elements such as a filtergraph, polarimetric modulator, detector, vibrations, and accumulations. Through these, the simulator performs most of the analyses that can be done with light in astronomy, such as differential photometry, spectroscopy, and polarimetry. The simulator is coded with high flexibility and ease of implementation of new effects and subsystems. Thus, it allows for the user to adapt it to a wide variety of instruments, even not exclusively solar ones, as illustrated with an example of application to a night-time observation. The simulator can provide support in the phase of instrument design and help assess tolerances and test solutions to underperformances arising during the instrument operations. All this makes SOPHISM a very valuable tool for all the stages of astronomical instrument definition, design, operation, and lifetime tracking evaluation. © 2018. The American Astronomical Society. All rights reserved., This work has been partially funded by the Spanish Ministerio de Economia y Competitividad, through Projects ESP2013-47349-C6, ESP2014-56169-C6, and ESP2016-77548-C5, including a percentage from European FEDER funds. It was also supported by Deutsches Zentrum fur Luft-und Raumfahrt (DLR) under project 50 OT 1201. The National Solar Observatory is operated by the Association of Universities for Research in Astronomy (AURA), Inc., under a cooperative agreement with the National Science Foundation.

S. K. Solanki et. al., ©2017 The American Astronomical Society. All rights reserved.The Sunrise balloon-borne solar observatory, consisting of a 1 m aperture telescope that provides a stabilized image to a UV filter imager and an imaging vector polarimeter, carried out its second science flight in 2013 June. It provided observations of parts of active regions at high spatial resolution, including the first high-resolution images in the Mg ii k line. The obtained data are of very high quality, with the best UV images reaching the diffraction limit of the telescope at 3000 Å after Multi-Frame Blind Deconvolution reconstruction accounting for phase-diversity information. Here a brief update is given of the instruments and the data reduction techniques, which includes an inversion of the polarimetric data. Mainly those aspects that evolved compared with the first flight are described. A tabular overview of the observations is given. In addition, an example time series of a part of the emerging active region NOAA AR 11768 observed relatively close to disk center is described and discussed in some detail. The observations cover the pores in the trailing polarity of the active region, as well as the polarity inversion line where flux emergence was ongoing and a small flare-like brightening occurred in the course of the time series. The pores are found to contain magnetic field strengths ranging up to 2500 G, and while large pores are clearly darker and cooler than the quiet Sun in all layers of the photosphere, the temperature and brightness of small pores approach or even exceed those of the quiet Sun in the upper photosphere., The German contribution to Sunrise and its reflight was funded by the Max Planck Foundation, the Strategic Innovations Fund of the President of the Max Planck Society (MPG), DLR, and private donations by supporting members of the Max Planck Society, which is gratefully acknowledged. The Spanish contribution was funded by the Ministerio de Economía y Competitividad under Projects ESP2013-47349-C6 and ESP2014-56169-C6, partially using European FEDER funds. The National Center for Atmospheric Research is sponsored by the National Science Foundation. The HAO contribution was partly funded through NASA grant number NNX13AE95G. This work was partly supported by the BK21 plus program through the National Research Foundation (NRF) funded by the Ministry of Education of Korea. L.G. acknowledges research funding from the State of Lower Saxony, Germany. SDO is a mission of NASA's Living With a Star (LWS) program. The SDO/HMI data were provided by the Joint Science Operation Center (JSOC). The National Solar Observatory (NSO) is operated by the Association of Universities for Research in Astronomy (AURA) Inc. under a cooperative agreement with the National Science Foundation.

When using a single DC/DC converter with multiple outputs and having a buck topology, which has one filter inductor per output, the designer can choose to couple these outputs together. This paper demonstrates additional benefits of coupling output inductors together. Apart from saving mass and volume, and due to an improved small signal behaviour it also reduces the output impedance of the regulated output. The paper will analyse a seven output push-pull converter used as a space power converter module and verify the theoretical results with experimental measurements.

The Imaging Magnetograph eXperiment (IMaX) is a spectropolarimeter built by four institutions in Spain that flew on board the Sunrise balloon-borne telesocope in June 2009 for almost six days over the Arctic Circle. As a polarimeter IMaX uses fast polarization modulation (based on the use of two liquid crystal retarders), real-time image accumulation, and dual beam polarimetry to reach polarization sensitivities of 0.1%. As a spectrograph, the instrument uses a LiNbO3 etalon in double pass and a narrow band pre-filter to achieve a spectral resolution of 85 mAA. IMaX uses the high Zeeman sensitive line of Fe I at 5250.2 AA and observes all four Stokes parameters at various points inside the spectral line. This allows vector magnetograms, Dopplergrams, and intensity frames to be produced that, after reconstruction, reach spatial resolutions in the 0.15-0.18 arcsec range over a 50x50 arcsec FOV. Time cadences vary between ten and 33 seconds, although the shortest one only includes longitudinal polarimetry. The spectral line is sampled in various ways depending on the applied observing mode, from just two points inside the line to 11 of them. All observing modes include one extra wavelength point in the nearby continuum. Gauss equivalent sensitivities are four Gauss for longitudinal fields and 80 Gauss for transverse fields per wavelength sample. The LOS velocities are estimated with statistical errors of the order of 5-40 m/s. The design, calibration and integration phases of the instrument, together with the implemented data reduction scheme are described in some detail., Comment: 17 figures

This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science. SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line., Comment: 36 pages, 41 figures