Search

Abstract Fusarium verticillioides is an important pathogen of maize and causes serious yield losses and food safety issues worldwide. F. verticillioides produces highly toxic mycotoxin Fumonisin B1 (FB1) in infested commodities which makes these food and feeds unsafe for humans and animals. For pathogenic fungi to successfully penetrate its plant hosts, the pathogen secretes hydrolytic enzymes that can facilitate penetration into the plant cutin layer. However, there is limited information on how cutinases transcriptionally regulated to impact F. verticillioides pathogenicity. In this study, our aim is to functionally characterize cutinase transcription factors that regulate key cutinase activities that are directly associated with F. verticillioides pathogenicity and FB1 biosynthesis. Gene deletion of cutinase transcription factor FvCTF1α did not affect the growth and morphology of the fungal mycelia on CMII medium, whereas the conidiation, utilization of sodium acetate and sodium oleate, stress tolerance against cell wall interfering agent, and the cutinase and pectinase activities in the ΔFvctf1α mutant were negatively impacted. FvCtf1α regulates the expression of induced cutinase genes FvCUT1 and FvCUT4 by binding to their GC-rich promoters. In addition, FvCtf1α, containing a novel function in regulating FB1, interacts with the promoter of FvFUM1 and FvFUM6 to down-regulate the expression of FvFUM1 and FvFUM6, resulting in decreased production of FB1 in the ΔFvctf1α strain. ΔFvctf1α exhibited decreased pathogenicity in maize due to the down-regulation of pathogenicity-related genes as well as key downstream cutinase genes FvCUT3 and FvCUT4 in F. verticillioides. We also demonstrated that FvCtf1α regulated FvCUT3 and FvCUT4 differently; FvCUT4 via direct regulation while FvCUT3 via indirect regulation by interacting with FvFarB, a homologous protein of FvCtf1α. Moreover, RNA-seq analysis showed that FvCtf1α was associated with many pathways, such as fatty acid metabolism, carbon source utilization, cell wall integrity, oxidative stress, and fumonisin synthesis in F. verticillioides. Our study demonstrated that FvCtf1α was not only involved in the regulation of cutinases but also a broad spectrum of pathways that ultimately affect F. verticillioides virulence and mycotoxin biosynthesis.

This study was conducted to investigate the feasibility of using yellow poplar as a structural member by determining allowable bending properties. Full-size lumber was classified by machine grading and the knot diameter ratio on the wide surface of lumber. The majority of machine grades of yellow poplar lumber with a cross-section of 38 × 89 mm2 were E8, E9, and E10. It was confirmed that the size of the knot diameter ratio tended to be smaller for higher machine grades. In the lowest grade, E8, of most machine grades, the allowable bending strength was lower than the corresponding design value in Korean standards. Application of 0.5 knot diameter ratio to the E8 grade lumber increased the bending strength to 3 MPa of the allowable value to suit the design value. All the allowable modulus of elasticities values of the majority of machine grades were higher than the design values. From the results of this study, it was expected that Korean yellow poplar could be utilized for structural bending members.

Abstract Background The partitioned survival model (PSM) and the state transition model (STM) are widely used in cost-effectiveness analyses of anticancer drugs. Using different modeling approaches with or without consideration of brain metastasis, we compared the quality-adjusted life-year (QALY) estimates of Osimertinib and pemetrexed-platinum in advanced non-small cell lung cancer with epidermal growth factor receptor mutations. Methods We constructed three economic models using parametric curves fitted to patient-level data from the National Health Insurance Review and Assessment claims database from 2009 to 2020. PSM and 3-health state transition model (3-STM) consist of three health states: progression-free, post-progression, and death. The 5-health state transition model (5-STM) has two additional health states (brain metastasis with continuing initial therapy, and with subsequent therapy). Time-dependent transition probabilities were calculated in the state transition models. The incremental life-year (LY) and QALY between the Osimertinib and pemetrexed-platinum cohorts for each modeling approach were estimated over seven years. Results The PSM and 3-STM produced similar incremental LY (0.889 and 0.899, respectively) and QALY (0.827 and 0.840, respectively). However, 5-STM, which considered brain metastasis as separate health states, yielded a slightly higher incremental LY (0.910) but lower incremental QALY (0.695) than PSM and 3-STM. Conclusions Our findings indicate that incorporating additional health states such as brain metastases into economic models can have a considerable impact on incremental QALY estimates. To ensure appropriate health technology assessment decisions, comparison and justification of different modeling approaches are recommended in the economic evaluation of anticancer drugs.

This study was conducted to confirm the feasibility of using yellow poplar, which is a fast-growing hardwood species in Korea, as a structural material. Lumber was produced, and the mechanical grading and the knot diameter ratio on the wide surface measurement were performed for each grade of lumber. It was confirmed that the majority mechanical grades of yellow poplar were E10, E11, and E12, and the size of knot in the surface increased as the mechanical grades decreased. A fitted distribution of tensile strength of the lumbers was the Weibull distribution. As a result of calculating the tensile allowable stress using the 5th percentile value calculated by the Weibull distribution and the non-parametric method according to the mechanical grade, all the experimental values were higher than the minimum allowable stresses presented in the Korean industrial standards. However, for the low grades, there was no significant difference from the standard values. This was thought to be due to the large size of knots in low-grade lumber. It was expected that the prospect of using yellow poplar structural member will be higher if additional research is conducted on the restriction of knot size according to the mechanical grade.

Herein, we investigate the effects of temperature and thiourea addition rate on the synthesis of copper sulfide nanoparticles (CuS NPs) via a chemical co-precipitation method, exploring their impact on the size and morphology of CuS NPs. Our systematic approach resulted in the successful synthesis of CuS NPs with significantly smaller nanoflower sizes than previously reported in the literature, providing insights into the nucleation and growth mechanisms under various synthesis conditions. Furthermore, the photocatalytic activity of the synthesized CuS NPs with three types of distinctive morphologies, namely, nanoflowers with 50 nm diameter (F-50), nanoflowers with 200 nm diameter, and nanogravels with 50 nm diameter, is comparatively analyzed. Notably, the F-50 exhibits a superior photocatalytic performance compared to the other samples, demonstrating the considerable influence of the NP size and morphology on their functional properties. Furthermore, the antibacterial property of the small CuS nanoflowers is examined using an antibacterial film fabricated by coating the NPs on a polyethylene terephthalate substrate, which is widely used as a protective or packaging film in various industries because of its transparency and flexibility. The antibacterial film can be used to kill both gram-positive and -negative bacteria effectively. This research contributes significantly to the understanding and optimization of CuS NP synthesis and application, emphasizing the potential of small-sized nanoflower CuS NPs in photocatalysis and antibacterial applications.

Abstract Computational fluid dynamics has been widely used to study hemodynamics, but accurately determining boundary conditions for turbulent blood flow remains challenging. This study aims to investigate the effect of patient-specific turbulence boundary conditions on the accuracy of turbulent flow simulation. Using a stenosis model with 50% severity in diameter, the post-stenosis turbulence flow region was simulated with different planes to obtain inlet boundary conditions and simulate downstream flows. The errors of simulated flow fields obtained with turbulence kinetic energy (TKE) boundary data and arbitrary turbulence intensity were compared. Additionally, the study tested various TKE data resolutions and noise levels to simulate experimental environments. The mean absolute error of velocity and TKE was investigated with various turbulence intensities and TKE mapping. While voxel size and signal-to-noise ratio of the TKE data affected the results, simulation with SNR > 5 and voxel size

Abstract Background Recent studies suggest that severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) infection increases the incidence of postoperative pulmonary complications (PPCs) and mortality. Consequently, patients with SARS‐CoV‐2 infection undergoing emergency surgery are more vulnerable to PPCs, yet few studies have evaluated PPCs in these patients. Methods A retrospective analysis was conducted between January 2022 and February 2023 on the medical records of patients infected with SARS‐CoV‐2 who underwent emergency surgery. The study evaluated the incidence of PPCs and 30‐day postoperative mortality in all enrolled patients. Results A total of 41 patients were enrolled, among whom PPCs occurred in seven patients (17%). The incidence of PPCs was statistically significant in patients with underlying diabetes compared to those without (p = 0.01) and in patients with an American Society of Anesthesiologists (ASA) class 3 or higher compared to those with less than 3 (p = 0.005) (ASA classification uses a grading system of I (one) through V (five)). The 30‐day mortality rate was 4.9%. Conclusions Our study demonstrates that the incidence of PPCs and 30‐day mortality rates after emergency surgery in patients infected with SARS‐CoV‐2 are higher compared to prepandemic baseline rates. Given the significant interest and concern worldwide regarding severe infectious respiratory diseases, such as coronavirus disease 2019 (COVID‐19), clinicians should focus on conducting research to identify ways to reduce the incidence of PPCs and mortality in patients with severe acute respiratory infections.

Abstract Objective To evaluate the effect of vitamin D supplementation on the recurrence rate of benign paroxysmal positional vertigo (BPPV). Methods A single‐center, prospective, double‐blind, placebo‐controlled, parallel‐group randomized controlled trial was conducted between November 2018 and May 2020. After successful treatment with canalith repositioning maneuvers, patients diagnosed with BPPV were randomized to either the vitamin D (n = 20) or placebo (n = 18) group. Only patients with serum vitamin D levels

In this study, crank-locker kinematic equations were used to analyze the three-point hitch behavior when the dynamometer was connected to the work machine. The dynamometer was statically tested with a hydraulic actuator, and the accuracy of the three-way force and the moment was confirmed to be 96–99%. The calibrated dynamometer was put to the test on a real farm field, and data were collected using a data acquisition system. Using the transport pitch correction equation, the collected data can be transformed into more realistic data. International standards were used to determine the point of connection between the tractor, dynamometer, and implement. The results of this study made it possible to accurately measure force and moment, which will have an important role in future agricultural technologies such as autonomous agricultural operation.

PurposeWe aimed to retrospectively analyzed the feasibility of fast four-dimensional computed tomography (4DCT)-based O-ring LINAC treatment for patients with an average respiratory amplitude was< 0.5 cm and who cannot endure long treatment times due to poor performance status in lung 4D-stereotactic body radiotherapy (SBRT).MethodsThis study included data of 38 patients who received lung 4D-SBRT and had average respiratory amplitude< 0.5 cm in the full phase. C-arm LINAC plans were based on 4DCT data obtained at phase values ranging from 20–70% using a C-arm LINAC. O-ring LINAC plans were retrospectively established based on 4DCT data obtained at phase values of 0–90% using an O-ring LINAC. The conformity index (CI), homogeneity index (HI), and gradient measurement of the planning target volumes (PTV) were analyzed to compare dosimetric data between C-arm LINAC and O-ring LINAC plans. Organs at risk were analyzed in accordance with the Radiation Therapy Oncology Group 0915 protocol. Treatment delivery time and total monitor units were analyzed to compare the efficiency of treatment delivery. Statistical comparisons were performed using the Wilcoxon signed-rank test (P< 0.05).ResultsFor the PTV, there was no significant difference in the CI or HI between C-arm LINAC and O-ring LINAC plans. For organs-at-risk, all plans met the criteria for dose constraint. There was a significant difference between C-arm LINAC and O-ring LINAC plans except in the spinal cord. Treatment delivery time was 92% longer for C-arm LINAC plans than for O-ring LINAC plans. The total MU value for C-arm LINAC plans was 9.6% higher than that for O-ring LINAC plans.ConclusionWe verified the feasibility of fast 4DCT-based O-ring LINAC treatment for patients with average respiratory amplitude< 0.5 cm and who cannot endure long treatment times due to poor performance status in lung 4D-SBRT.

IntroductionThe emergence of new severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants has caused unprecedented health and socioeconomic crises, necessitating the immediate development of highly effective neutralizing antibodies. Despite recent advancements in anti-SARS-CoV-2 receptor-binding domain (RBD)-specific monoclonal antibodies (mAbs) derived from convalescent patient samples, their efficacy against emerging variants has been limited. In this study, we present a novel dual-targeting strategy using bispecific antibodies (bsAbs) that specifically recognize both the SARS-CoV-2 RBD and fusion peptide (FP), crucial domains for viral attachment to the host cell membrane and fusion in SARS-CoV-2 infection. MethodsUsing phage display technology, we rapidly isolated FP-specific mAbs from an established human recombinant antibody library, identifying K107.1 with a nanomolar affinity for SARS-CoV-2 FP. Furthermore, we generated K203.A, a new bsAb built in immunoglobulin G4-(single-chain variable fragment)2 forms and demonstrating a high manufacturing yield and nanomolar affinity to both the RBD and FP, by fusing K102.1, our previously reported RBD-specific mAb, with K107.1. ResultsOur comprehensive in vitro functional analyses revealed that the K203.A bsAb significantly outperformed the parental RBD-specific mAb in terms of neutralization efficacy against SARS-CoV-2 variants. Furthermore, intravenous monotherapy with K203.A demonstrated potent in vivo neutralizing activity without significant in vivo toxicity in a mouse model infected with a SARS-CoV-2 variant. ConclusionThese findings present a novel bsAb dual-targeting strategy, directed at SARS-CoV-2 RBD and FP, as an effective approach for rapid development and management against continuously evolving SARS-CoV-2 variants.

Abstract Performing an accurate canalith repositioning procedure (CRP) is important for treating benign paroxysmal positional vertigo, because inadequate rotational head angles can result in ineffective otolith mobilization and consequent treatment failure. Specialists-guided Epley maneuver reportedly had mean errors of 13.7°–24.4° while they were significantly larger (40.0°–51.5°) when self-administered. Similar results were obtained for the Barbeque maneuver: mean errors were 9.2°–13.0° by the specialists while they were significantly larger (22.9°–28.6°) when self-administered. Our study aimed to validate the feasibility of an inertial measurement unit sensor-based CRP (IMU-CRP) by analyzing the differences in accuracy in the rotational angles, comparing them with education-based conventional CRP (EDU-CRP). A pilot validation was also performed by analyzing the treatment success rate of IMU-CRP in patients with BPPV. This single-institution prospective, comparative effectiveness study examined 19 participants without active vertigo or prior knowledge of benign paroxysmal positional vertigo and CRP. Participants conducted the Epley and Barbeque roll maneuvers without and with auditory guidance (EDU-CRP vs. IMU-CRP, respectively) twice, and head rotation accuracies were compared. Differences in target angles based on the American Academy of Otolaryngology-Head and Neck Surgery guidelines were considered errors. For BPPV participants, treatment success was assessed based on the presence or absence of nystagmus, vertigo, and dizziness. For all the Epley and Barbeque roll maneuvers steps, the absolute errors were smaller for IMU- than for EDU-CRPs, with significant differences in steps 2–4 and 3–6 of the Epley and Barbeque roll maneuvers, respectively. A learning effect was found in steps 4 and 5 of the Barbeque roll maneuver but not in the Epley maneuver. The treatment success rates after 1 h were 71.4% and 100% for the Epley and Barbeque roll maneuvers, respectively. Real-time feedback on head rotation angles induced more appropriate movements in the Epley and Barbeque roll maneuvers. A guiding device based on head monitoring providing real-time auditory feedback may increase the self-administered CRP success rates in treating benign paroxysmal positional vertigo.

Abstract A one-step immunoassay is presented for the detection of ochratoxin A (OTA) using an antibody complex with switching peptides. Because the switching peptides (fluorescence-labeled) were able to bind the frame region of antibodies (IgGs), they were dissociated from antibodies immediately when target analytes were bound to the binding pockets of antibodies. From the fluorescence signal measurements of switching peptides, a quantitative analysis of target analytes, via a one-step immunoassay without any washing steps, could be performed. As the first step, the binding constant (K D) of OTA to the antibodies was estimated under the continuous flow conditions of a surface plasmon resonance biosensor. Then, the optimal switching peptide, among four types of switching peptides, and the reaction condition for complex formation with the switching peptide were determined for the one-step immunoassay for OTA analysis. Additionally, the selectivity test of one-step immunoassay for OTA was carried out in comparison with phenylalanine and zearalenone. For the application to the one-step immunoassay to detect OTA in wines, two types of sample pre-treatment methods were compared: (1) a liquid extraction was carried out using chloroform as a solvent with subsequent resuspension in phosphate-buffered saline (total analysis time

Abstract Objective This study aimed to identify significant differences in cochlea microvessel size between a diabetic mouse model (db/db) and normal mice using three‐dimensional (3D) quantitative analysis. Methods Six control heterozygote db/+ as well as 18 male B6/BKS(D)‐Leprdb/J (db/db) mice aged 14 (n = 9) and 28 (n = 9) weeks were examined. After clearing the cochlea, we reconstructed the 3D volumes of the spiral modiolar artery (SMA) in the cochlea using light‐sheet microscopy and analyzed vessel wall thickness, cross‐sectional area, short and long diameter, and vessel height. Results The average SMA‐wall thickness in the db/db‐mouse group (3.418 ± 0.328 μm) was greater than that in the control group (2.388 ± 0.411 μm). The average cross‐sectional outer area, short diameter, and long diameter of the SMA in db/db mice were significantly larger than those in control mice (all p

Objectives The first purpose of this study was to investigate the difference in the frequency of involvement of the superior vestibular nerve (SVN) and inferior vestibular nerve (IVN) territories in general vestibular disorders, and to identify which IVN territory was more commonly involved in patients with IVN lesions. The second purpose was to investigate the correlation of the degree of each saccular and posterior semicircular canal (PSCC) dysfunction, as represented by the parameters of cervical vestibular evoked myogenic potential (cVEMP) and video head impulse test (vHIT), in patients with pathology of the IVN territory. Methods In total, 346 patients with dizziness who underwent the caloric test, cVEMP, and vHIT were enrolled. Canal weakness in the caloric test, interaural amplitude difference (IAD) of cVEMP, and vestibulo-ocular reflex gain of the vestibulo-ocular reflex gain of the posterior semicircular canal (p-VOR) in vHIT were analyzed. Results Among the enrolled patients, 15.6% had total vestibular nerve dysfunction, 14.5% had solely SVN dysfunction, and 29.5% had solely IVN dysfunction. Isolated saccular pathology was most common in patients with IVN pathology, followed by those with total IVN dysfunction and PSCC dysfunction. IAD and p-VOR were statistically well correlated, and the correlation was strongest in patients with both pathologic IAD and pathologic p-VOR (n=23, r=0.944), followed by patients with normal IAD and pathologic p-VOR (n=27, r=0.762) and patients with pathologic IAD and normal p-VOR (n=106, r=0.339). Conclusion Abnormal results were more common in vestibular tests investigating the IVN than in vestibular tests investigating the SVN in patients with general vestibular disorders. Isolated saccular pathology was more frequent than PSCC or combined pathology in patients with IVN dysfunction. Patients with abnormal p-VOR in vHIT had a higher probability of having both saccular and PSCC pathologies than patients with an abnormal IAD. This study describes the characteristics of vestibular-system subregions and provides guidance for clinically interpreting the combination of cVEMP and vHIT results.

Current research on multispectral stealth material technology focuses on practical functionalities such as optical transparency, flexibility, and lightweight. Herein, an optically transparent and single‐layer frequency‐selective surface (OTSF) absorber for dual‐band millimeter‐wave (MMW) absorption and low‐infrared (IR) emissivity is proposed. By adopting indium tin oxide and polyethylene terephthalate, the proposed OTSF absorber exhibits good optical transparency (76% transmittance in the 400–800 nm range on an average) and flexibility. The OTSF absorber exhibits high absorption at the dual‐band frequency in the MMW range (99.7% at 35 GHz and 89.7% at 103 GHz). In the IR band, the average band emissivity of the OTSF absorber for the midwave IR (MWIR) band (3–8 μm) and the long‐wave IR (LWIR) band (8–15 μm) is measured to be 0.26 and 0.23, respectively. Thermal images of the OTSF absorber clearly show its low‐emission characteristics that are similar to those of metal. The proposed OTSF absorber structure has significant potential for practical applications of MMW–IR multispectral stealth materials.

Background: Field potential (FP) signals from human induced pluripotent stem cell-derived cardiomyocyte (hiPSC-CM) spheroid which are used for drug safety tests in the preclinical stage are different from action potential (AP) signals and require working knowledge of the multi-electrode array (MEA) system. In this study, we developed in silico three-dimensional (3-D) models of hiPSC-CM spheroids for the simulation of field potential measurement. We compared our model simulation results against in vitro experimental data under the effect of drugs E-4031 and nifedipine.Methods:In silico 3-D models of hiPSC-CM spheroids were constructed in spherical and discoidal shapes. Tetrahedral meshes were generated inside the models, and the propagation of the action potential in the model was obtained by numerically solving the monodomain reaction-diffusion equation. An electrical model of electrode was constructed and FPs were calculated using the extracellular potentials from the AP propagations. The effects of drugs were simulated by matching the simulation results with in vitro experimental data.Results: The simulated FPs from the 3-D models of hiPSC-CM spheroids exhibited highly variable shapes depending on the stimulation and measurement locations. The values of the IC50 of E-4031 and nifedipine calculated by matching the simulated FP durations with in vitro experimental data were in line with the experimentally measured ones reported in the literature.Conclusion: The 3-D in silico models of hiPSC-CM spheroids generated highly variable FPs similar to those observed in in vitro experiments. The in silico model has the potential to complement the interpretation of the FP signals obtained from in vitro experiments.

The Med1 transcriptional coactivator is a crucial component of the Mediator middle complex, which regulates the expression of specific genes involved in cell development, differentiation, reproduction, and homeostasis. The Med1 LxxLL motif, a five-amino-acid peptide sequence, is essential for Med1-mediated gene expression. Our previous study revealed that the disruption of the Med1 subunit leads to a significant increase in fumonisin B1 (FB1) production in the maize pathogen Fusarium verticillioides. However, our understanding of how Med1 regulates FB1 biosynthesis in F. verticillioides, particularly through the Med1 LxxLL motifs, remains limited. To characterize the role of LxxLL motifs, we generated a series of Med1 LxxLL deletion and amino acid substitution mutants. These mutants exhibited impaired mycelial growth and conidia germination while demonstrating enhanced conidia production and virulence. Similar to the Med1 deletion mutant, Med1 LxxLL motif mutants also exhibited increased FB1 biosynthesis in F. verticillioides. Proteomic profiling revealed that the Med1 LxxLL motif regulated the biosynthesis of several key substances that affected FB1 production, including starch and carotenoid. Subsequent studies demonstrated that the production of amylopectin, which is strongly linked to FB1 biosynthesis, was significantly increased in Med1 LxxLL motif mutants. In addition, the disruption of carotenoid metabolic genes decreased carotenoid content, thus stimulating FB1 biosynthesis in F. verticillioides. Taken together, our results provide valuable insights into how the Med1 LxxLL motif regulates FB1 biosynthesis in the mycotoxigenic fungus F. verticillioides.

Abstract Background Cardiac resynchronization therapy (CRT) is an effective treatment option for patients with heart failure (HF) and left ventricular (LV) dyssynchrony. However, the problem of some patients not responding to CRT remains unresolved. This study aimed to propose a novel in silico method for CRT simulation. Methods Three-dimensional heart geometry was constructed from computed tomography images. The finite element method was used to elucidate the electric wave propagation in the heart. The electric excitation and mechanical contraction were coupled with vascular hemodynamics by the lumped parameter model. The model parameters for three-dimensional (3D) heart and vascular mechanics were estimated by matching computed variables with measured physiological parameters. CRT effects were simulated in a patient with HF and left bundle branch block (LBBB). LV end-diastolic (LVEDV) and end-systolic volumes (LVESV), LV ejection fraction (LVEF), and CRT responsiveness measured from the in silico simulation model were compared with those from clinical observation. A CRT responder was defined as absolute increase in LVEF ≥ 5% or relative increase in LVEF ≥ 15%. Results A 68-year-old female with nonischemic HF and LBBB was retrospectively included. The in silico CRT simulation modeling revealed that changes in LVEDV, LVESV, and LVEF by CRT were from 174 to 173 mL, 116 to 104 mL, and 33 to 40%, respectively. Absolute and relative ΔLVEF were 7% and 18%, respectively, signifying a CRT responder. In clinical observation, echocardiography showed that changes in LVEDV, LVESV, and LVEF by CRT were from 162 to 119 mL, 114 to 69 mL, and 29 to 42%, respectively. Absolute and relative ΔLVESV were 13% and 31%, respectively, also signifying a CRT responder. CRT responsiveness from the in silico CRT simulation model was concordant with that in the clinical observation. Conclusion This in silico CRT simulation method is a feasible technique to screen for CRT non-responders in patients with HF and LBBB.

Seed maceration and contamination with mycotoxin fumonisin inflicted by Fusarium verticillioides is a major disease concern for maize producers worldwide. Meta-analyses of quantitative trait loci for Fusarium ear rot resistance uncovered several ethylene (ET) biosynthesis and signaling genes within them, implicating ET in maize interactions with F. verticillioides. We tested this hypothesis using maize knockout mutants of the 1-aminocyclopropane-1-carboxylate (ACC) synthases ZmACS2 and ZmACS6. Infected wild-type seed emitted five-fold higher ET levels compared with controls, whereas ET was abolished in the acs2 and acs6 single and double mutants. The mutants supported reduced fungal biomass, conidia, and fumonisin content. Normal susceptibility was restored in the acs6 mutant with exogenous treatment of ET precursor ACC. Subsequently, we showed that fungal G-protein signaling is required for virulence via induction of maize-produced ET. F. verticillioides Gβ subunit and two regulators of G-protein signaling mutants displayed reduced seed colonization and decreased ET levels. These defects were rescued by exogenous application of ACC. We concluded that pathogen-induced ET facilitates F. verticillioides colonization of seed, and, in turn, host ET production is manipulated via G-protein signaling of F. verticillioides to facilitate pathogenesis.[Graphic: see text] Copyright © 2021 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

The microstructure and hardness along the thickness direction of a water-quenched, high-strength thick plate with a thickness of 40 mm were investigated with three specimens from the thick plate: surface, 1/4t, and 1/2t (center) thickness, and the phase transformation behavior of the thick plate according to the cooling rate was analyzed through dilatometric experiments. Finally, the cooling rate for each thickness of the thick plate was estimated by comparing the microstructure and hardness of the thick plate along with the thickness with those of the dilatometric specimens. Martensite microstructure was observed on the surface of the water-quenched thick plate due to the fast cooling rate. On the other hand, an inhomogeneous microstructure was transformed inside the thick plate due to the relatively slow cooling rate and central segregation of Mn. A small fraction of bainite was shown at 1/4t thickness. A banded microstructure with martensite and bainite resulting from Mn segregation was developed at 1/2t; that is, the full martensite microstructure was transformed in the Mn-enriched area even at a slow cooling rate due to high hardenability, but a bainite microstructure was formed in the Mn-depleted area owing to relatively low hardenability. A portion of martensite with fine cementite at the surface and 1/4t was identified as auto-tempered martensite with a Bagaryatskii orientation relationship between the ferrite matrix and cementite. The microstructure and hardness as well as dilatation were investigated at various cooling rates through a dilatometric experiment, and a continuous cooling transformation (CCT) diagram was finally presented for the thick plate. Comparing the microstructure and hardness at the surface, 1/4t, and 1/2t of the thick plate with those of dilatometric specimens cooled at various cooling rates, it was estimated that the surface of the thick plate was cooled at more than 20 °C/s, whereas the 1/4t region was cooled at approximately 5~10 °C/s during water quenching. Despite the difficulty in estimation of the cooling rate of 1/2t due to the banded structure, the cooling rate of 1/2t was estimated between 3 and 5 °C/s based on the results of an Mn-depleted zone.

Abstract Occupation ratio and fatty infiltration are important parameters for evaluating patients with rotator cuff tears. We analyzed the occupation ratio using a deep-learning framework and studied the fatty infiltration of the supraspinatus muscle using an automated region-based Otsu thresholding technique. To calculate the amount of fatty infiltration of the supraspinatus muscle using an automated region-based Otsu thresholding technique. The mean Dice similarity coefficient, accuracy, sensitivity, specificity, and relative area difference for the segmented lesion, measuring the similarity of clinician assessment and that of a deep neural network, were 0.97, 99.84, 96.89, 99.92, and 0.07, respectively, for the supraspinatus fossa and 0.94, 99.89, 93.34, 99.95, and 2.03, respectively, for the supraspinatus muscle. The fatty infiltration measure using the Otsu thresholding method significantly differed among the Goutallier grades (Grade 0; 0.06, Grade 1; 4.68, Grade 2; 20.10, Grade 3; 42.86, Grade 4; 55.79, p

Peroxisomes are ubiquitous organelles in eukaryotes that fulfill various important metabolic functions. In this study, we investigated the role of docking/translocation module (DTM) peroxins, mainly FvPex8, FvPex13, FvPex14, and FvPex33, in Fusarium verticillioides development, virulence, and fumonisin B1 (FB1) biosynthesis. Protein interaction experiments suggested that FvPex13 serves as the central DTM subunit in F. verticillioides. Notably, FvPex8 and FvPex14 did not show direct interaction in our experiments. We generated gene-deletion mutants (ΔFvpex8, ΔFvpex13, ΔFvpex14, ΔFvpex33, ΔFvpex33/14) and further examined the functional role of these peroxins. Deletion mutants exhibited disparity in carbon nutrient utilization and defect in cell-wall integrity when stress agents were applied. Under nutrient starvation, mutants also showed higher levels of lipid droplet accumulation. Particularly, ΔFvpex8 mutant showed significant FB1 reduction and altered expression of key FB1 biosynthesis genes. However, FvPex13 was primarily responsible for asexual conidia reproduction and virulence, while the ΔFvpex33/14 double mutant also showed a virulence defect. In summary, our study suggests that FvPex13 is the central component of DTM, with direct physical interaction with other DTM peroxins, and regulates peroxisome membrane biogenesis as well as PTS1- and PTS2-mediated transmembrane cargo transportation. Importantly, we also characterized FvPex8 as a key component in F. verticillioides DTM that affects peroxisome function and FB1 biosynthesis.[Graphic: see text] Copyright © 2021 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Human RBM42 associates with the spliceosome complex. Here the authors show that the fungus counterpart of RBM42, FgRbp1 regulates splicing by interacting with FgU2AF23.

Removal of agricultural pipes used in crop support and greenhouse agriculture is manpower-intensive. However, most agricultural workers are elderly. Therefore, auxiliary devices should be used to allow pipe removal with as little force as possible. In this study, the design parameters of an extraction device were optimized within constraints to minimize the force required to remove agricultural pipes. The optimization parameters are the length of each link and the initial link angle of the device. The driving force, according to the design parameters, was calculated by applying the theory of kinematics. An optimal design plan was derived using an optimization algorithm to minimize the force driving the device within the desired constraint. As a result of the optimization, it was confirmed that the force required to remove the pipe was reduced by 87.1% compared with the initial design value and was designed to suit the user’s convenience.

Although warts are a common skin condition/disease that recurs in childhood, treatment completion is difficult owing to the pain associated with conventional therapies. In this case, Korean herbal medicine, Guijakjihwang-Tang, and indirect moxibustion was used to treat a recalcitrant cutaneous wart without pain and recurrence. A 7-year-old boy presented with recurrent cutaneous warts on his right hand and received cryotherapy 3 times in the previous year. The wart recurred during the course of cryotherapy treatment, and the patient did not want to suffer any more pain from the previous treatment. Therefore, parents sought an efficient and painless therapy. The patient was treated for 2 months using Guijakjihwang-Tang combined with indirect moxibustion. The prominent lesion separated in the 2nd month of treatment and completely recovered without adverse events in the 3rd month. There was no recurrence over 12 months of follow-up. This report provides meaningful insights into the use of Korean medicine as a safe, painless and efficient treatment for warts in pediatric patients.

Brain metastases (BM) are common in patients with non-small cell lung cancer (NSCLC). However, the pure economic burden of BM is unknown. This study aimed to evaluate the impact of BM on healthcare costs and resource utilization in patients with NSCLC by comparing patients with and without BM. This was a retrospective cohort analysis of South Korean health insurance review and assessment claims data. Patients with stage IIIB or IV NSCLC were identified (March 1, 2013 to February 28, 2018). We compared their two-year and per-patient-per-month (PPPM) healthcare costs and resource utilization with 1:3 propensity score-matched patients without the condition. A generalized linear model was used to estimate the impact of BM and other covariates on healthcare costs. After propensity score matching with the 33 402 newly diagnosed cases of stage IIIB or IV NSCLC, 3435 and 10 305 patients were classified as having or not having BM, respectively. Mean healthcare costs were significantly greater in patients with BM for both the two years (US$ 44 692 vs. US$ 32 230, p < .0001) and PPPM (US$ 3510 vs. US$ 2573, p < .0001). The length of hospital stay was longer in patients with BM (79.15 vs. 69.41 days for two years, p < .0001; 7.69 vs. 6.86 days PPPM, p < .0001), and patients with BM had more outpatient visits (50.61 vs. 46.43 times for two years, p < .0001; 3.64 vs. 3.40 times PPPM costs, p < .0001). The costs of drugs, radiology/radiotherapy, and admission comprised the majority of PPPM costs and were higher in patients with BM. The generalized linear model analysis suggested that patients with BM had significantly increased healthcare costs (by 1.29-fold, 95% confidence interval 1.26–1.32). BM is a significant economic burden for patients with NSCLC. Therefore, it is important to prevent BM in patients with NSCLC to reduce their economic burden.

Patients with terminal cancer have different physical symptoms, prognoses, emotional distress, and end-of-life care plans from those receiving aggressive chemotherapy; few studies have assessed healthcare resource use in these patients. Therefore, this study aimed to assess healthcare resource utilization and medical costs incurred during best supportive care after the last anticancer drug treatment in patients with terminal cancer. This retrospective observational study was conducted using national sample cohort data from the National Health Insurance Service in South Korea. Only patients with cancer who were treated with the last anticancer drugs from January 1, 2006, to June 30, 2015, were included in the study. The period of best supportive care was defined as the time from the date of use of the last anticancer drug to death. Healthcare resource utilization and medical costs were estimated during the best supportive care. A generalized linear model with a log-link function and gamma distribution was used to evaluate the impact of demographic and healthcare utilization factors on total medical costs. Among the 2,480 patients in the study, 93.9% were hospitalized, and hospitalization days (30.8 days) accounted for 39.7% of the surviving period (77.5 days). The proportions of intensive care unit admissions and emergency department visits were 15.8% and 18.9%, respectively. The average total medical cost per patient was $6,310, with the inpatient cost ($5,705) being approximately 9.4 times higher than the outpatient cost ($605). The length of hospitalization had the greatest impact on the total medical costs. Pancreatic cancer had the highest proportion of patients who were hospitalized (97.4%) and the highest medical cost ($7,702). Hospital-based resources were utilized by most patients with terminal cancer, and hospitalization was a major driver of the total medical cost. An alternative system for hospitalization should be developed to support patients with terminal cancer, both clinically and financially.

Fumonisin contamination of corn caused by Fusarium verticillioides is a major concern worldwide. While key genes involved in fumonisin biosynthesis are known, the location within the fungal cell where this process occurs has yet to be fully characterized. In this study, three key enzymes, i.e., Fum1, Fum8, and Fum6, associated with early steps of fumonisin biosynthesis pathway, were tagged with GFP, and we examined their cellular localization. Results showed that these three proteins co-localized with the vacuole. To further understand the role of the vacuole in fumonisin B1 (FB1) biosynthesis, we disrupted two predicted vacuole associated proteins, FvRab7 and FvVam7, resulting in a significant reduction of FB1 biosynthesis and a lack of Fum1-GFP fluorescence signal. Furthermore, we used the microtubule-targeting drug carbendazim to show that proper microtubule assembly is critical for proper Fum1 protein localization and FB1 biosynthesis. Additionally, we found that α1 tubulin is a negative regulator in FB1 biosynthesis. We concluded that vacuole proteins with optimized microtubule assembly play a crucial role in proper Fum1 protein localization and fumonisin production in F. verticillioides.

Automatic three-dimensional (3-D) reconstruction of the coronary arteries (CA) from medical imaging modalities is still a challenging task. In this study, we present a deep learning-based method of automatic identification of the two ends of the vessel from X-ray coronary angiography (XCA). We also present a method of using template models of CA in matching the two-dimensional segmented vessels from two different angles of XCA. For the deep learning network, we used a U-net consisting of an encoder (Resnet) and a decoder. The two ends of the vessel were manually labeled to generate training images. The network was trained with 2,342, 1,907, and 1,523 labeled images for the left anterior descending (LAD), left circumflex (LCX), and right coronary artery (RCA), respectively. For template models of CA, ten reconstructed 3-D models were averaged for each artery. The accuracy of correspondence using template models was compared with that of manual matching. The deep learning network pointed the proximal region (20% of the total length) in 97.7, 97.5, and 96.4% of 315, 201, and 167 test images for LAD, LCX, and RCA, respectively. The success rates in pointing the distal region were 94.9, 89.8, and 94.6%, respectively. The average distances between the projected points from the reconstructed 3-D model to the detector and the points on the segmented vessels were not statistically different between the template and manual matchings. The computed FFR was not significantly different between the two matchings either. Deep learning methodology is feasible in identifying the two ends of the vessel in XCA, and the accuracy of using template models is comparable to that of manual correspondence in matching the segmented vessels from two angles.

A series of eco-friendly biocomposites with improved mechanical properties and interfacial interaction were prepared by melt-mixing natural fibers using a cellulose acetate derivative as a polymer matrix and used to evaluate their mechanical, thermal, and morphological properties. The natural fiber used as a biofiller was pre-surface-treated by a refining process using alkali and natural enzymes to improve compatibility and increase interfacial bonding with biopolymer substrate. To increase the processability of the cellulose material, the raw material was plasticized and the composition prepared in the form of pellets in a twin-screw extruder by mixing with an additive before being molded through an injection process. For each composition, the interfacial bonding force between different materials was confirmed through morphology analysis and evaluation of mechanical and thermal properties. When biofillers and a viscosity modifier were used at the same time, the fabricated biocomposites had controllable crystallinity, stiffness, and elasticity and showed improved mechanical strength, such as tensile strength and flexural strength. These results indicated that interfacial properties could be increased through interfacial interactions between two different components due to appropriate surface treatment. In addition, it was confirmed that a composition having interfacial interaction, not a simple mixture, could be prepared by lowering both glass transition and melting temperature. The lowering of glass transition temperature increased the elasticity of the biocomposites, which have the potential advantage of easier melt processing when applied to various injection parts.

A flame retardant refers to a substance that can be added to a material having the property of being efficiently combusted to improve the material physically and chemically. It should not affect the physical properties required for the final product. Halogen-based compounds are representative flame retardants with excellent flame retardancy. However, their use is limited due to restrictions on the use of chemicals introduced due to human safety. Magnesium hydroxide, one alternative material of halogen flame retardants, is widely used as an eco-friendly flame retardant. However, the most significant disadvantage is high load. To find a solution to this problem, many studies have been conducted by mixing magnesium hydroxide with other additives to create a synergistic effect. In this study, flame retardancy and mechanical properties of polypropylene-based flame retardant composites as a function of mixing surface-modified magnesium hydroxide with phosphorus-based flame retardants were investigated. All materials including PP, additives, and flame retardants were mixed using an extrusion process. Specimens were prepared by an injection process of the compound made after mixing. As a result of the evaluation of the mechanical properties by the modified flame retardant, the relational expression of the mechanical performance degradation as a function of the amount of addition was obtained, and the tensile (CBATS) and bending strength (CBABS) were performed on the amount of flame retardant added. The relational expression obtained in this study is considered to be a formula for predicting the strength reduction according to the addition amount of the modified flame retardant and can be used in industry. In addition, it was found that the addition amount of the modified flame retardant had a greater effect on the lowering of the bending strength.

Abstract Background To confirm whether shellfish are suitable for consumption, the quality of seawater and shellfish in shellfish-producing areas must be assessed regularly. This study was conducted to evaluate the bacterial quality on the Changseon area, containing a designated shellfish-producing area, in Korea during 2011–2013. Result Even though many inland pollutants near the area were identified, they showed no significant impact on the designated area and the shellfish therein. The concentrations of fecal bacteria in all the seawater and mussel samples from the designated area during the harvesting season were within the standards of various countries. Pathogenic bacteria were not detected in any of the mussel samples. In our previous study, the hazardous metal levels in all the mussels from the same area were also within the limits of different countries. Conclusion The mussel products in this area are suitable for consumption based on fecal pollution, pathogenic bacteria, and also heavy metals.

The following results were obtained from a series of studies to accumulate data to reduce the coefficient of friction for press dies by performing tribological tests before and after the UNSM treatment of SM45C. The UNSM-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those for untreated materials. When loads of 5 N, 7.5 N, and 10 N were applied to the untreated material of SM45C, the coefficient of friction was approximately 0.76–0.78. With the large specimen, a value of 0.72–0.78 was maintained at a load of 50 N despite the differences in the size of the wear specimen and working load. Tribological tests of large specimens of SM45C treated with UNSM under tribological conditions of 100 N and 50 N showed that the frictional coefficient and time constant stably converged between 0.7 and 0.8. The friction coefficients of the small specimens treated with UNSM showed values between 0.78 and 0.75 under 5 N, 7.5 N, and 10 N. The friction coefficients of the SM45C treated with UNSM were comparable to each other.

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55–75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of 5.32 μm. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250–300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

Safety evaluation of drugs requires examination of the risk of generating Torsade de Pointes (TdP) because it can lead to sudden cardiac death. Until recently, the QT interval in the electrocardiogram (ECG) has been used in the evaluation of TdP risk because the QT interval is known to be associated with the development of TdP. Although TdP risk evaluation based on QT interval has been successful in removing drugs with TdP risk from the market, some safe drugs may have also been affected due to the low specificity of QT interval-based evaluation. For more accurate evaluation of drug safety, the comprehensive in vitro proarrhythmia assay (CiPA) has been proposed by regulatory agencies, industry, and academia. Although the CiPA initiative includes in silico evaluation of cellular action potential as a component, attempts to utilize in silico simulation in drug safety evaluation are expanding, even to simulating human ECG using biophysical three-dimensional models of the heart and torso under the effects of drugs. Here, we review recent developments in the use of in silico models for the evaluation of the proarrhythmic risk of drugs. We review the single cell, one-dimensional, two-dimensional, and three-dimensional models and their applications reported in the literature and discuss the possibility of utilizing ECG simulation in drug safety evaluation.

The highly sensitive detection of peanut allergens (PAs) using silicon-based electrolyte-gated transistors (Si-EGTs) was demonstrated. The Si-EGT was made using a top-down technique. The fabricated Si-EGT showed excellent intrinsic electrical characteristics, including a low threshold voltage of 0.7 V, low subthreshold swing of SV) showed a constant behavior from the subthreshold regime to the linear regime. The current-related sensitivity (SI) was high in the subthreshold regime and then significantly decreased as the drain current increased. The limit of detection (LOD) was calculated to be as low as 25 pg/mL based on SI characteristics, which is the lowest value reported to date in the literature for various sensor methodologies. The Si-EGT showed selective detection of PA through a non-specific control test. These results confirm that Si-EGT is a high-sensitivity and low-power biosensor for PA detection.

Abstract Background The aim of this study was to investigate the in vitro inhibitory effects of Fucofuroeckol-A isolated from Eisenia bicyclis against tyrosinase activity and 3-isobutyl-1-methylxanthine (IBMX)-induced melanin biosynthesis in B16F10 melanoma cells. Result Among the ethanolic (EtOH) extract of E. bicyclis and its organic solvent fractions, the ethyl acetate (EtOAc) soluble fraction showed a noticeable inhibitory effect on mushroom tyrosinase with an IC50 value of 37.6 ± 0.1 μg/mL. Repeated column chromatography of the active EtOAc fraction resulted in the isolation of Fucofuroeckol-A. It evidenced more potent tyrosinase inhibitory effect with an IC50 value of 11.4 ± 1.4 μM than arbutin (IC50 = 1076.6 ± 44.3 μM), which was used as a positive control. Lineweaver-Burk plots suggest that Fucofuroeckol-A plays as a noncompetitive inhibitor against tyrosinase. Furthermore, we have evaluated the inhibitory effects of Fucofuroeckol-A on IBMX-induced melanin formation in B16F10 melanoma cells. Fucofuroeckol-A (12.5–100 μM) exhibited a significant inhibition of melanin production in the melanoma cells. Conclusion In the present study, we suggested that Fucofuroeckol-A might prove possibility as a novel inhibitor of melanin biosynthesis in cosmetic applications.

Recent advances in sequencing technology and big data analytics are moving plant pathology into a new era where we are now pursuing a deeper systems-level understanding of host–pathogen associations. For past several decades, scientists have predominantly tried to delineate and streamline these interactions into single pathogen–single host model systems, using reductionist experimental approaches. As many of us are aware, there have been several significant proposed ideas and models to help simplify and conceptualize the complex nature of associations that occur between plants and pathogens. However, equipped with vastly improved technology we now have opportunities to further explore multicomponent host–pathogen associations as well as microbe–microbe associations in phytobiomes and agroecosystems. Here, we would like to share our perspective on how game theory concepts could be adopted to study the dynamics of complex phytobiomes and to help us gain fresh and transformative insight.

ObjectiveCatheter ablation of persistent atrial fibrillation (AF) is still challenging, no optimal extra-pulmonary vein lesion set is known. We previously reported the clinical feasibility of computational modeling-guided AF catheter ablation.MethodsWe randomly assigned 118 patients with persistent AF (77.8% men, age 60.8 ± 9.9 years) to the computational modeling-guided ablation group (53 patients) and the empirical ablation group (55 patients) based on the operators’ experience. For virtual ablation, four virtual linear and one electrogram-guided lesion sets were tested on patient heart computed tomogram-based models, and the lesion set with the fastest termination time was reported to the operator in the modeling-guided ablation group. The primary outcome was freedom from atrial tachyarrhythmias lasting longer than 30 s after a single procedure.ResultsDuring 31.5 ± 9.4 months, virtual ablation procedures were available in 95.2% of the patients (108/118). Clinical recurrence rate was significantly lower after a modeling-guided ablation than after an empirical ablation (20.8 vs. 40.0%, log-rank p = 0.042). Modeling-guided ablation was independently associated with a better long-term rhythm outcome of persistent AF ablation (HR = 0.29 [0.12–0.69], p = 0.005). The rhythm outcome of the modeling-guided ablation showed better trends in males, non-obese patients with a less remodeled atrium (left atrial dimension < 50 mm), ejection fraction ≥ 50%, and those without hypertension or diabetes (p < 0.01). There were no significant differences between the groups for the total procedure time (p = 0.403), ablation time (p = 0.510), and major complication rate (p = 0.900).ConclusionAmong patients with persistent AF, the computational modeling-guided ablation was superior to the empirical catheter ablation regarding the rhythm outcome.Clinical Trial RegistrationThis study was registered with the ClinicalTrials.gov, number NCT02171364.

Purpose: We aimed to retrospectively analyzed the feasibility of fast four-dimensional computed tomography (4DCT)-based O-ring LINAC treatment for patients with an average respiratory amplitude was< 0.5 cm and who cannot endure long treatment times due to poor performance status in lung 4Dstereotactic body radiotherapy (SBRT). Methods: This study included data of 38 patients who received lung 4D-SBRT and had average respiratory amplitude< 0.5 cm in the full phase. C-arm LINAC plans were based on 4DCT data obtained at phase values ranging from 20–70% using a C-arm LINAC. O-ring LINAC plans were retrospectively established based on 4DCT data obtained at phase values of 0–90% using an O-ring LINAC. The conformity index (CI), homogeneity index (HI), and gradient measurement of the planning target volumes (PTV) were analyzed to compare dosimetric data between C-arm LINAC and O-ring LINAC plans. Organs at risk were analyzed in accordance with the Radiation Therapy Oncology Group 0915 protocol. Treatment delivery time and total monitor units were analyzed to compare the efficiency of treatment delivery. Statistical comparisons were performed using the Wilcoxon signed-rank test (P< 0.05). Results: For the PTV, there was no significant difference in the CI or HI between C-arm LINAC and O-ring LINAC plans. For organs-at-risk, all plans met the criteria for dose constraint. There was a significant difference between C-arm LINAC and O-ring LINAC plans except in the spinal cord. Treatment delivery time was 92% longer for C-arm LINAC plans than for O-ring LINAC plans. The total MU value for C-arm LINAC plans was 9.6% higher than that for O-ring LINAC plans. Conclusion: We verified the feasibility of fast 4DCT-based O-ring LINAC treatment for patients with average respiratory amplitude< 0.5 cm and who cannot endure long treatment times due to poor performance status in lung 4D-SBRT. [ABSTRACT FROM AUTHOR]

Background: Those classified as Tae-Eum (TE)-type people in Sasang constitutional medicine (SCM) are prone to obesity. Although extensive clinical observations have confirmed this tendency, the underlying physiological mechanisms are unknown. Here, we propose a novel hypothesis using integrative physiology to explain this phenomenon. Methods: Hypoactive lung function in the TE type indicates that respiration is attenuated at the cellular level—specifically, mitochondrial oxygen consumption. Because a functional reduction in cellular energy metabolism is suggestive of intrinsic hypoactivity in the consumption (or production) of metabolic energy, we reasoned that this tendency can readily cause weight gain via an increase in anabolism. Thus, this relationship can be derived from the graph of cellular metabolic power plotted against body weight. We analyzed the clinical data of 548 individuals to test this hypothesis. Results: The statistical analysis revealed that the cellular metabolic rate was lower in TE-type individuals and that their percentage of obesity (body mass index >25) was significantly higher compared to other constitutional groups. Conclusion: Lower cellular metabolic power can be an explanation for the obesity trend in TE type people.

Abstract We report surface plasmon (SP) lasing in metal/semiconductor nanostructures, where one-dimensional periodic silver slit gratings are placed on top of an InGaAsP layer. The SP nature of the lasing is confirmed from the emission wavelength governed by the grating period, polarization analysis, spatial coherence, and comparison with the linear transmission. The excellent performance of the device as an SP source is demonstrated by its tunable emission in the 400-nm-wide telecom wavelength band at room temperature. We show that the stimulated emission enhanced by the Purcell effect enables successful SP lasing at high energies above the gap energy of the gain. We also discuss the dependence of the lasing efficiency on temperature, grating dimension, and type of metal.

Pokkah Boeng is a serious disease of sugarcane, which can lead to devastating yield losses in crop-producing regions, including southern China. However, there is still uncertainty about the causal agent of the disease. Our aim was to isolate and characterize the pathogen through morphological, physiological, and molecular analyses. We isolated sugarcane-colonizing fungi in Fujian, China. Isolated fungi were first assessed for their cell wall degrading enzyme capabilities, and five isolates were identified for further analysis. Internal transcribed spacer sequencing revealed that these five strains are Fusarium, Alternaria, Phoma, Phomopsis, and Epicoccum. The Fusarium isolate was further identified as F. verticillioides after Calmodulin and EF-1α gene sequencing and microscopic morphology study. Pathogenicity assay confirmed that F. verticillioides was directly responsible for disease on sugarcane. Co-inoculation of F. verticillioides with other isolated fungi did not lead to a significant difference in disease severity, refuting the idea that other cellulolytic fungi can increase disease severity as an endophyte. This is the first report characterizing pathogenic F. verticillioides on sugarcane in southern China.

Abstract Background Hemodynamic simulation for quantifying fractional flow reserve (FFR) is often performed in a patient-specific geometry of coronary arteries reconstructed from the images from various imaging modalities. Because optical coherence tomography (OCT) images can provide more precise vascular lumen geometry, regardless of stenotic severity, hemodynamic simulation based on OCT images may be effective. The aim of this study is to perform OCT–FFR simulations by coupling a 3D CFD model from geometrically correct OCT images with a LPM based on vessel lengths extracted from CAG data with clinical validations for the present method. Methods To simulate coronary hemodynamics, we developed a fast and accurate method that combined a computational fluid dynamics (CFD) model of an OCT-based region of interest (ROI) with a lumped parameter model (LPM) of the coronary microvasculature and veins. Here, the LPM was based on vessel lengths extracted from coronary X-ray angiography (CAG) images. Based on a vessel length-based approach, we describe a theoretical formulation for the total resistance of the LPM from a three-dimensional (3D) CFD model of the ROI. Results To show the utility of this method, we present calculated examples of FFR from OCT images. To validate the OCT-based FFR calculation (OCT–FFR) clinically, we compared the computed OCT–FFR values for 17 vessels of 13 patients with clinically measured FFR (M-FFR) values. Conclusion A novel formulation for the total resistance of LPM is introduced to accurately simulate a 3D CFD model of the ROI. The simulated FFR values compared well with clinically measured ones, showing the accuracy of the method. Moreover, the present method is fast in terms of computational time, enabling clinicians to provide solutions handled within the hospital.

Background: Individuals with Mibyeong are difficult to identify. Although extensive research has attempted to introduce an easy and clear method for Mibyeong diagnosis, the indices used to categorize Mibyeong severity are unclear. We hypothesized that individuals with severe Mibyeong have reduced physiological function, thus activating homeostatic regulatory functions and inducing alterations in vascular resistance and capacitance. Methods: Novel indices used to categorize Mibyeong severity based on the cardiovascular system model are described. We analyzed resistance and capacitance values using a simple cardiovascular system model optimally satisfying the measured systolic and diastolic pressures, heart rate, and age. Results: Clinical data from 509 individuals were examined to test our hypothesis. A statistical analysis revealed that the vascular resistance was lower in individuals with severe Mibyeong symptoms and decreased with increasing Mibyeong severity, whereas the vascular capacitance showed an opposite trend. Conclusion: We derived indices to categorize Mibyeong severity and tested 509 individuals. An epidemiological analysis revealed that the vascular resistance decreased while the capacitance increased with increasing Mibyeong severity, indicating the validity of the values as Mibyeong indices.