Search

The roughness sublayer (RSL) is one compartment of the surface layer (SL) where turbulence deviates from Monin–Obukhov similarity theory. As the computing power increases, model grid sizes approach the gray zone of turbulence in the energy-containing range and the lowest model layer is located within the RSL. From this perspective, the RSL has an important implication in atmospheric modeling research. However, it has not been explicitly simulated in atmospheric mesoscale models. This study incorporates the RSL model proposed by Harman and Finnigan (2007, 2008) into the Jiménez et al. (2012) SL scheme. A high-resolution simulation performed with the Weather Research and Forecasting model (WRF) illustrates the impacts of the RSL parameterization on the wind, air temperature, and rainfall simulation in the atmospheric boundary layer. As the roughness parameters vary with the atmospheric stability and vegetative phenology in the RSL model, our RSL implementation reproduces the observed surface wind, particularly over tall canopies in the winter season by reducing the root mean square error (RMSE) from 3.1 to 1.8 m s -1. Moreover, the improvement is relevant to air temperature (from 2.74 to 2.67 K of RMSE) and precipitation (from 140 to 135 mm per month of RMSE). Our findings suggest that the RSL must be properly considered both for better weather and climate simulations and for the application of wind energy and atmospheric dispersion. [ABSTRACT FROM AUTHOR]

Since the Industrial Revolution, the geographical extent of cities has increased around the world. In particular, following three decades of rapid regional economic growth, many Asian megacities have emerged and continue to expand, resulting in inevitable short-term urban redevelopment. In this region, the microclimatic impacts of urban redevelopment have not been extensively investigated using long-term in situ observations. In this study, changes in surface sensible heat exchange, heat storage, and anthropogenic heat emissions that are due to urban residential redevelopment were quantified and analyzed on the basis of a 3-yr micrometeorological record from the Seoul, South Korea, metropolitan area. The results show that, following urban redevelopment of compact high-rise residential buildings, 1) the daily minimum air temperature near the ground surface increased by ~0.6 K; 2) the ratio between surface sensible heat and net radiation increased by from ~9% (summer) to 31% (winter), anthropogenic heat emissions increased by from 7.6 (summer) to 23.6 (spring) W m−2, and daily maximum heat storage ranged from 35.1 (spring) to 54.5 (summer) W m−2; and 3) there was a transition of local circulation with changes in the surface properties of heat sources and roughness. [ABSTRACT FROM AUTHOR]

ABSTRACT Electricity demand is influenced by atmospheric conditions, and, therefore it is important to quantify their relationships suitably for accurate electricity demand forecasting and the implementation of power-saving policies. However, interdependencies and characteristics of covariance among meteorological variables within the same periodicities hinder the quantification of their direct and indirect impacts on electric power load. To investigate the strength of the direct correlation between atmospheric conditions and electric power load, this study harnessed a new partialization analysis method based on a partial phase synchronization index combined with wavelet transformation. The advantage of the proposed method is that it can be used to evaluate the degree of independent contribution of the variables over different spatiotemporal scales. Compared with traditional statistical analyses, this new partialization analysis shows that air temperature is the principal variable associated directly with electricity demand, but that the strength of the relationship varies with season and time scale. Relative humidity and wind speed have strong direct correlations with electricity in summer and winter, respectively. Insolation is directly coupled to the electric power load only on sub-diurnal time scales. This investigation indicates that for accurate forecasting of electricity demand, changes in the coupling strengths of different atmospheric variables should be incorporated into the electric power load forecasting process. The study shows that a partial phase synchronization index, combined with wavelet transformation, is a useful tool that could be used in other studies to assess complex interacting atmospheric oscillations that cannot be assessed properly by traditional approaches. [ABSTRACT FROM AUTHOR]

On 21 September 2010, heavy rainfall with a local maximum of 259 mm d occurred near Seoul, South Korea. We examined the ability of the Weather Research and Forecasting (WRF) model in reproducing this disastrous rainfall event and identified the role of two physical processes: planetary boundary layer (PBL) and microphysics (MPS) processes. The WRF model was forced by 6-hourly National Centers for Environmental Prediction (NCEP) Final analysis (FNL) data for 36 hours form 1200 UTC 20 to 0000 UTC 22 September 2010. Twenty-five experiments were performed, consisting of five different PBL schemes-Yonsei University (YSU), Mellor-Yamada-Janjic (MYJ), Quasi Normal Scale Elimination (QNSE), Bougeault and Lacarrere (BouLac), and University of Washington (UW)-and five different MPS schemes-WRF Single-Moment 6-class (WSM6), Goddard, Thompson, Milbrandt 2-moments, and Morrison 2-moments. As expected, there was a specific combination of MPS and PBL schemes that showed good skill in forecasting the precipitation. However, there was no specific PBL or MPS scheme that outperformed the others in all aspects. The experiments with the UW PBL or Thompson MPS scheme showed a relatively small amount of precipitation. Analyses form the sensitivity experiments confirmed that the spatial distribution of the simulated precipitation was dominated by the PBL processes, whereas the MPS processes determined the amount of rainfall. It was also found that the temporal evolution of the precipitation was influenced more by the PBL processes than by the MPS processes. [ABSTRACT FROM AUTHOR]

A simple aerodynamic-variance method is proposed to fill gaps in continuous CO2 flux measurements in rainy conditions, when open-path analysers do not function. The method requires turbulent conditions (friction velocity greater than 0.1ms−1), and uses measurements of mean wind speed, and standard deviations of temperature and CO2 concentration fluctuations to complement, and at times replace, eddy-covariance measurements of friction velocity, sensible heat flux and CO2 flux. Friction velocity is estimated from the mean wind speed with a flux-gradient relationship modified for the roughness sublayer. Since normalised standard deviations do not follow Monin-Obukhov similarity theory in the roughness sublayer, a simple classification scheme according to the scalar turbulence scale was used. This scheme is shown to produce sensible heat and CO2 flux estimates that are well correlated with the measured values. [ABSTRACT FROM AUTHOR]

Background: It is important to quantify changes in CO2 sources and sinks with land use and land cover change. In the last several decades, carbon sources and sinks in East Asia have been altered by intensive land cover changes due to rapid economic growth and related urbanization. To understand impact of urbanization on carbon cycle in the monsoon Asia, we analyze net CO2 exchanges for various land cover types across an urbanization gradient in Korea covering high-rise high-density residential, suburban, cropland, and subtropical forest areas. Results: Our analysis demonstrates that the urban residential and suburban areas are constant CO2 sources throughout the year (2.75 and 1.02 kg C m−2 year−1 at the urban and suburban sites), and the net CO2 emission indicate impacts of urban vegetation that responds to the seasonal progression of the monsoon. However, the total random uncertainties of measurement are much larger in the urban and suburban areas than at the nonurban sites, which can make it challenging to obtain accurate urban flux measurements. The cropland and forest sites are strong carbon sinks because of a double-cropping system and favorable climate conditions during the study period, respectively (− 0.73 and − 0.60 kg C m−2 year−1 at the cropland and forest sites, respectively). The urban area of high population density (15,000 persons km−2) shows a relatively weak CO2 emission rate per capita (0.7 t CO2 year−1 person−1), especially in winter because of a district heating system and smaller traffic volume. The suburban area shows larger net CO2 emissions per capita (4.9 t CO2 year−1 person−1) because of a high traffic volume, despite a smaller building fraction and population density (770 persons km−2). Conclusions: We show that in situ flux observation is challenging because of its larger random uncertainty and this larger uncertainty should be carefully considered in urban studies. Our findings indicate the important role of urban vegetation in the carbon balance and its interaction with the monsoon activity in East Asia. Urban planning in the monsoon Asia must consider interaction on change in the monsoon activity and urban structure and function for sustainable city in a changing climate. [ABSTRACT FROM AUTHOR]

In this study, the WRF-Chem v4.4 model was utilized to evaluate the sensitivity of O 3 simulations with three bottom-up emission inventories (EDGAR-HTAP v2 and v3 and KORUS v5) using surface and aircraft data in East Asia during the Korea-United States Air Quality (KORUS-AQ) campaign period in 2016. All emission inventories were found to reproduce the diurnal variations of O 3 and its main precursor NO 2 as compared to the surface monitor data. However, the spatial distributions of the daily maximum 8 h average (MDA8) O 3 in the model do not completely align with the observations. The model MDA8 O 3 had a negative (positive) bias north (south) of 30° N over China. All simulations underestimated the observed CO by 50 %–60 % over China and South Korea. In the Seoul Metropolitan Area (SMA), EDGAR-HTAP v2 and v3 and KORUS v5 simulated the vertical shapes and diurnal patterns of O 3 and other precursors effectively, but the model underestimated the observed O 3 , CO, and HCHO concentrations. Notably, the model aromatic volatile organic compounds (VOCs) were significantly underestimated with the three bottom-up emission inventories, although the KORUS v5 shows improvements. The model isoprene estimations had a positive bias relative to the observations, suggesting that the Model of Emissions of Gases and Aerosols from Nature (MEGAN) version 2.04 overestimated isoprene emissions. Additional model simulations were conducted by doubling CO and VOC emissions over China and South Korea to investigate the causes of the model O 3 biases and the effects of the long-range transport on the O 3 over South Korea. The doubled CO and VOC emission simulations improved the model O 3 simulations for the local-emission-dominant case but led to the model O 3 overestimations for the transport-dominant case, which emphasizes the need for accurate representations of the local VOC emissions over South Korea. [ABSTRACT FROM AUTHOR]

For regional weather forecasts and climate predictions, it is important to determine the optimal domain size, location, and top height. A wide model domain can be chosen to avoid noises from lateral boundaries but this can include the Tibetan Plateau and areas of northern Manchuria to the Kamchatka Peninsula in Northeast Asia. This study shows that topographic regions around the Tibetan Plateau and warm pool areas over the Manchuria in an extended model domain may have harmful effects on the accuracy of short‐ to medium‐range regional predictions on the downwind side in spring. The inaccuracy is related to model errors due to steep terrain regions in the Tibetan Plateau and cold bias in the lower stratosphere north of Manchuria. Well‐designed spectral nudging over the eastern flank of the Tibetan Plateau and the use of a higher model top are found to improve regional predictions for Northeast Asia in spring by effectively eliminating errors associated with steep topography and temperature biases in the upper troposphere and lower stratosphere, respectively. Our findings suggest possible ways to mitigate biases due to steep mountains and upper‐level processes in regional modeling. We discuss the role of our method in terms of uncertainties in regional weather forecasts and climate predictions. [ABSTRACT FROM AUTHOR]

A total of 20 urban neighbourhood-scale eddy covariance flux tower datasets are made openly available after being harmonized to create a 50 site–year collection with broad diversity in climate and urban surface characteristics. Variables needed as inputs for land surface models (incoming radiation, temperature, humidity, air pressure, wind and precipitation) are quality controlled, gap-filled and prepended with 10 years of reanalysis-derived local data, enabling an extended spin up to equilibrate models with local climate conditions. For both gap filling and spin up, ERA5 reanalysis meteorological data are bias corrected using tower-based observations, accounting for diurnal, seasonal and local urban effects not modelled in ERA5. The bias correction methods developed perform well compared to methods used in other datasets (e.g. WFDE5 or FLUXNET2015). Other variables (turbulent and upwelling radiation fluxes) are harmonized and quality controlled without gap filling. Site description metadata include local land cover fractions (buildings, roads, trees, grass etc.), building height and morphology, aerodynamic roughness estimates, population density and satellite imagery. This open collection can help extend our understanding of urban environmental processes through observational synthesis studies or in the evaluation of land surface environmental models in a wide range of urban settings. These data can be accessed from https://doi.org/10.5281/zenodo.7104984 (Lipson et al., 2022). [ABSTRACT FROM AUTHOR]

Wind energy plays an important role in the sustainable energy transition towards a low-carbon society. Proper assessment of wind energy resources and accurate wind energy prediction are essential prerequisites for balancing electricity supply and demand. However, these remain challenging, especially for onshore wind farms over complex terrains, owing to the interplay between surface heterogeneities and intermittent turbulent flows in the planetary boundary layer. This study aimed to improve wind characteristic assessment and medium-term wind power forecasts over complex hilly terrain using a numerical weather prediction (NWP) model. The NWP model reproduced the wind speed distribution, duration, and spatio-temporal variabilities of the observed hub-height wind speed at 24 wind turbines in onshore wind farms when incorporating more realistic surface roughness effects, such as the subgrid-scale topography, roughness sublayer, and canopy height. This study also emphasizes the good features for machine learning that represent heterogeneities in the surface roughness elements in the atmospheric model. We showed that medium-term forecasting using the NWP model output and a simple artificial neural network (ANN) improved day-ahead wind power forecasts by 14% in terms of annual normalized mean absolute error. Our results suggest that better parameterizations of surface friction in atmospheric models are important for wind power forecasting and resource assessment using NWP models, especially when combined with machine learning techniques, and shed light on onshore wind power forecasting and wind energy assessment in mountainous regions. [Display omitted] • Onshore wind energy forecasting and assessment are challenging over complex terrain. • Surface friction is properly considered in an atmospheric model and machine learning. • Winds simulation improved with an integration of surface friction over mountain. • Our study improved wind power predictability over complex terrain. [ABSTRACT FROM AUTHOR]

Moderate Resolution Imaging Radiometer (MODIS) gross primary productivity (GPP) has been used widely to study the global carbon cycle associated with terrestrial ecosystems. The retrieval of the current MODIS productivity with a 1 × 1 km 2 resolution has limitations when presenting subgrid scale processes in terrestrial ecosystems, specifically when forests are located in mountainous areas, and shows heterogeneity in vegetation type due to intensive land use. Here, we evaluate MODIS GPP (MOD17) at Gwangneung deciduous forest KoFlux tower (deciduous forest; GDK) for 2006–2010 in Korea, where the forests comprise heterogeneous vegetation cover over complex terrain. The monthly MODIS GPP data overestimated the GDK measurements in a range of +15% to +34% and was fairly well correlated ( R = 0.88) with the monthly variability at GDK during the growing season. In addition, the MODIS data partly represented the sharp GPP reduction during the Asian summer monsoon (June–September) when intensive precipitation considerably reduces solar radiation and disturbs the forest ecosystem. To examine the influence of subgrid scale heterogeneity on GPP estimates over the MODIS scale, the individual vegetation type and its area within a corresponding MODIS pixel were identified using a national forest type map (∼71-m spatial resolution), and the annual GPP in the same area as the MODIS pixel was estimated. This resulted in a slight reduction in the positive MODIS bias by ∼10%, with a high degree of uncertainty in the estimation. The MODIS discrepancy for GDK suggests further investigation is necessary to determine the MODIS errors associated with the site-specific aerodynamic and hydrological characteristics that are closely related to the mountainous topography. The accuracy of meteorological variables and the impact of the very cloudy conditions in East Asia also need to be assessed. [ABSTRACT FROM AUTHOR]

Based on observations over an alpine glacier, we investigate the turbulent flux dissimilarity between momentum and sensible heat transfer in a stably stratified katabatic flow. The flux correlation coefficient RF is employed as a measure of variable levels of the flux similarity, which are found to be modulated by the anisotropy of turbulence. In the katabatic wind regime over this glacier, heat is transported more efficiently than momentum. Based on quadrant analysis, the sweep–ejection differences in the flux fraction constitute turbulence characteristics in terms of the velocity aspect ratio, which unravel dissimilar transport of momentum and heat. Moreover, an innovative method is established for connecting quadrant analysis and cospectral analysis, whereby the hyperbolic quadrant hole size is coupled to the frequency underlying the fast Fourier transform. In extending applications of octant analysis, we introduce a hypothetical octant hole, whose size is solicited as a proxy for the amplitude scale of fluctuating fluxes. The contributions to R F can then be quantified for eddy structures that are associated with different amplitude scales. The katabatic flow structures identified from octant analysis differ in their behaviour so helping illuminate the outcome of flux dissimilarity. Exhibited as a statistical behaviour regardless of amplitude scale, along-wind rapid motions of heated air parcels can modify fractional contributions to the heat flux instead of the momentum flux, with reductions in R F related to decreasing heat-flux fractions. Besides, along-wind slow motions of cooled air parcels cannot modify the flux fractions for both momentum and heat. Thus, the flux dissimilarity due to low-speed low-temperature eddies cannot be explicable in terms of the flux fractions alone. These findings are an incipient step towards physical understanding of the turbulent flux dissimilarity for a stably stratified katabatic flow. [ABSTRACT FROM AUTHOR]

Improvement of fog simulation accuracy was investigated for the fogs that occurred on the south coast of the Korean Peninsula using the WRF (3D) and PAFOG (1D) coupled model. In total, 22 fog cases were simulated and accuracy of the fog simulation was examined based on Critical Success Index, Hit Rate and False Alarm Rate. The performance of the coupled WRF-PAFOG model was better than that of the single WRF model as expected. However, much more significant improvement appeared only when the data from a 300 m meteorological tower was not only used for the initial conditions but also nudged during the simulation. Moreover, a proper prescription of soil moisture was found to be important for accurate fog simulation especially for the fog cases with prior precipitation since efficient moisture supply from the precipitation-soaked soil might have been critical for fog formation. It was also demonstrated that with such optimal coupled model setting, a coastal radiation fog event with prior precipitation could be very realistically simulated: the fog onset and dissipation times matched so well with observation. In detail, radiative cooling at the surface was critical to form a surface inversion layer as the night fell. Then the vapor flux from the precipitation-soaked surface was confined within the inversion layer to form fog. It is suggested that a proper prescription of soil moisture in the model based on observations, if readily available, could be a cost-effective method for improving operational fog forecasting, considering the fact that tall meteorological towers are a rarity in the world. [ABSTRACT FROM AUTHOR]

The dilution effect caused by boundary-layer evolution over land has strong influences on air quality. Accurate and continuous measurements of the boundary-layer height over urban areas are therefore needed for complete air-quality assessments. Commercial ceilometers, in combination with reliable and simple methodologies, can be used to retrieve the mixed-layer height, and represent a means of obtaining information on vertical mixing and atmospheric structure above cities. Here, we evaluate various retrieval algorithms based on the gradient method against high-temporal-resolution radiosonde observations. Based on the results, we propose a simple algorithm by using the gradient method, the correction of background noise and the moving averages, with the minimum number of parameters that need to be adjusted to the local properties and the instrument itself. The algorithm is adjusted for Seoul, Korea, and improves the retrieval performance by reducing high-frequency noise. The algorithm is used to investigate the relationship between the evolution of the daytime mixed-layer height and air pollution under a two-layer mixing model where changes in concentration depend only on the urban boundary-layer growth and air entrainment from the free atmosphere. Using 2 months of ceilometer retrievals of mixed-layer height and air-quality data from across the city, we find strong negative correlations for primary emitted pollutants such as NO2, CO, SO2, and particulate matter smaller than 10 µm, and a modest positive correlation for O3. The results provide insight into the significant influence of urban boundary-layer evolution on Seoul's air quality. [ABSTRACT FROM AUTHOR]

We developed the height correction algorithm based on the Monin–Obukhov similarity theory for application in Weather Research and Forecasting (WRF) model outputs to correct the 10-m height definition and match weather station observations. Thirty simulations were conducted for April 2012 to validate the height correction algorithm against observations such as the automated surface observing system and automatic weather stations. The WRF model simulations were constructed with two nested domains with horizontal grid spacings of 10 and 1 km. The root mean square error of the diagnosed 10-m wind speed after applying the height correction algorithm was consistently reduced compared to the one before applying the algorithm over the innermost domain during the analysis period. The impact of the height correction on diagnosed wind speed was greater when the environment was unstable and the magnitude of the roughness length was large. Evaluation showed that a strong synoptic forcing condition results in a significant reduction in the bias of wind speed. • Developed the height correction algorithm based on Monin–Obukhov similarity theory. • The 10-m height definition in the model is corrected to match the height of observation. • Alleviated positive bias in wind speed of weather research and forecasting model. [ABSTRACT FROM AUTHOR]

Arctic tundra is undergoing a rapid transition due to global warming and will be exposed to snow-free conditions for longer periods under projected climate scenarios. Regional climate modeling is useful for understanding and predicting climate change in the Arctic tundra, however, the lack of in-situ observations of surface energy fluxes and the planetary boundary layer (PBL) structure hinders accurate predictions of local and regional climate around the Arctic. In this study, we investigate the performance of the Polar-optimized version of the Weather Research and Forecasting model (PWRF) in the Arctic tundra on clear days in summer. Based on simultaneous observations of surface fluxes and the PBL structure in Cambridge Bay, Nunavut, Canada, our validation shows that the PWRF simulates a drier environment, leading to a larger Bowen ratio and a warmer atmosphere compared to observations. Further sensitivity analyses indicate that the model biases are mainly from the uncertainties in physical parameters such as surface albedo and emissivity, the solar constant, and the model top height, rather than structural flaws in the model physics. Importantly, the PWRF reproduces the observations more accurately when the observed soil moisture is fed into the simulation. This indicates that there must be improvements in simulations of the land-atmosphere interaction at the Arctic tundra, not only in the accuracy of the initial soil moisture conditions but also in soil hydraulic properties and drainage processes. The mixing diagram analysis also shows that the entrainment process between the PBL and the overlying atmosphere needs to be improved for better weather and climate simulation. Our findings shed light on modeling studies in the Arctic region by disentangling the model error sources from uncertainties by parameters and physics package options. • Arctic tundra is exposed to warmer conditions with a warming global climate. • Polar WRF has bias in simulating climate near the surface on clear summer days. • Polar WRF reproduces the observations accurately with the observed soil moisture. • Regional climate simulation improves with proper numerical design over the Arctic. [ABSTRACT FROM AUTHOR]