Search

Nitrous oxide (N2O) is a strong greenhouse gas and stratospheric ozone-depleting substance. Around 20% of global emissions stem from the ocean, but current estimates and future projections are uncertain due to poor spatial coverage over large areas and limited understanding of drivers of N2O dynamics. Here, we focus on the extensive and particularly data-lean Arctic Ocean shelves north of Siberia that experience rapid warming and increasing input of land-derived nitrogen with permafrost thaw. We combine water column N2O measurements from two expeditions with on-board incubation of intact sediment cores to assess N2O dynamics and the impact of land-derived nitrogen. Elevated nitrogen concentrations in water column and sediments were observed near large river mouths. Concentrations of N2O were only weakly correlated with dissolved nitrogen and turbidity, reflecting particulate matter from rivers and coastal erosion, and correlations varied between river plumes. Surface water N2O concentrations were on average close to equilibrium with the atmosphere, but varied widely (N2O saturation 38%-180%), indicating strong local N2O sources and sinks. Water column N2O profiles and low sediment-water N2O fluxes do not support strong sedimentary sources or sinks. We suggest that N2O dynamics in the region are influenced by water column N2O consumption under aerobic conditions or in anoxic microsites of particles, and possibly also by water column N2O production. Changes in biogeochemical and physical conditions will likely alter N2O dynamics in the Siberian Arctic Ocean over the coming decades, in addition to reduced N2O solubility in a warmer ocean.

Effects of aerosols such as black carbon (BC) on climate and buildup of the monsoon over the Indian Ocean are insufficiently quantified. Uncertain contributions from various natural and anthropogenic sources impede our understanding. Here, we use observations over 5 y of BC and its isotopes at a remote island observatory in northern Indian Ocean to constrain loadings and sources during little-studied monsoon season. Carbon-14 data show a highly variable yet largely fossil (65 ± 15%) source mixture. Combining carbon-14 with carbon-13 reveals the impact of African savanna burning, which occasionally approach 50% (48 ± 9%) of the total BC loadings. The BC mass-absorption cross-section for this regime is 7.6 ± 2.6 m2/g, with higher values during savanna fire input. Taken together, the combustion sources, longevity, and optical properties of BC aerosols over summertime Indian Ocean are different than the more-studied winter aerosol, with implications for chemical transport and climate model simulations of the Indian monsoon.

Black carbon (BC) aerosols perturb climate and impoverish air quality/ human health-affecting similar to 1.5 billion people in South Asia. However, the lack of source-diagnostic observations of BC is hindering the evaluation of uncertain bottom-up emission inventories (EIs) and thereby also models/policies. Here, we present dual-isotope-based (Delta C-14/delta C-13) fingerprinting of wintertime BC at two receptor sites of the continental outflow. Our results show a remarkable similarity in contributions of biomass and fossil combustion, both from the site capturing the highly populated highly polluted Indo-Gangetic Plain footprint (IGP; Delta C-14-f(biomass) = 50 +/- 3%) and the second site in the N. Indian Ocean representing a wider South Asian footprint (52 +/- 6%). Yet, both sites reflect distinct delta C-13-fingerprints, indicating a distinguishable contribution of C-4-biomass burning from peninsular India (PI). Tailored-model-predicted seasonaveraged BC concentrations (700 +/- 440 ng m(-3)) match observations (740 +/- 250 ng m(-3)), however, unveiling a systematically increasing model-observation bias (+19% to -53%) through winter. Inclusion of BC from open burning alone does not reconcile predictions (f(biomass) = 44 +/- 8%) with observations. Direct source-segregated comparison reveals regional offsets in anthropogenic emission fluxes in EIs, overestimated fossil-BC in the IGP, and underestimated biomass-BC in PI, which contributes to the model-observation bias. This ground-truthing pinpoints uncertainties in BC emission sources, which benefit both climate/air-quality modeling and mitigation policies in South Asia.

Black carbon (BC) aerosols affect climate, especially in high aerosol loading regions such as South Asia. A key uncertainty for the climate effects of BC is the evolution of light-absorbing properties in the atmosphere. Here, we present a year-round comparison of the mass absorption cross section (MAC; 678 nm) of BC in air (PM10) and rain, for samples collected at the Maldives Climate Observatory at Hanimaadhoo. We develop a filter-loading correction scheme for estimating BC absorption on filters used in high-volume samplers. The year-round average MAC(678) of BC in the rain is almost twice (13.3 +/- 4.2 m(2)/g) compared to the PM10 aerosol (7.2 +/- 2.6 m(2)/g). A possible explanation is the elevated ratio of organic carbon (OC) to BC observed in rain particulate matter (9.4 +/- 6.3) compared to in the aerosols (OC/BC 2.6 +/- 1.4 and water-insoluble organic carbon/BC 1.2 +/- 0.8), indicating a coating-enhancement effect. In addition to BC, we also investigated the MAC(365) of water-soluble brown carbon in PM10 (0.4 +/- 0.4 m(2)/g, at 365 nm). In contrast to BC, MAC(365)brown carbon relates to air mass history, showing higher values for samples from air originating over the South Asian landmass. Furthermore, calculated washout ratios are much lower for BC compared to OC and inorganic ions such as sulfate, implying a longer atmospheric lifetime for BC. The wet deposition flux for BC during the high loading winter was 3 times higher than during the wet summer, despite much less precipitation in the winter.

According to ecological theory, two species cannot occupy the same niche. Using nitrogen isotope analyses (delta N-15) of amino acids, we tested the extent to which two sympatric deposit-feeding amphipods,Monoporeia affinisandPontoporeia femorata, partition their trophic resources. We found that trophic position (TP) and resynthesis index ( n-ary sumation V; a proxy for degradation status of ingested material prior to assimilation by the consumer) differ between species. The surface-feedingM. affinishad higher TP and intermediate n-ary sumation V, both pointing to a large contribution of metazoans in its diet.P. femorata, which feeds in the subsurface layers, had lower TP and a bimodal distribution of the n-ary sumation V values, supporting previous experimental evidence of a larger feeding niche. We also evaluated whether TP and n-ary sumation V values have consequences for amphipod fecundity and embryo viability and found that embryo viability inM. affiniswas negatively linked to TP. Our results indicate that the amino acid-delta N-15 data paired with information about reproductive status are useful for detecting differences in the trophic ecology of sympatric amphipods.

Black carbon (BC) contributes to Arctic climate warming, yet source attributions are inaccurate due to lacking observational constraints and uncertainties in emission inventories. Year-round, isotope-constrained observations reveal strong seasonal variations in BC sources with a consistent and synchronous pattern at all Arctic sites. These sources were dominated by emissions from fossil fuel combustion in the winter and by biomass burning in the summer. The annual mean source of BC to the circum-Arctic was 39 +/- 10% from biomass burning. Comparison of transport-model predictions with the observations showed good agreement for BC concentrations, with larger discrepancies for (fossil/biomass burning) sources. The accuracy of simulated BC concentration, but not of origin, points to misallocations of emissions in the emission inventories. The consistency in seasonal source contributions of BC throughout the Arctic provides strong justification for targeted emission reductions to limit the impact of BC on climate warming in the Arctic and beyond.

South Asian megacities are strong sources of regional air pollution. Delhi is a key hotspot of health-and climate-impacting black carbon (BC) emissions, affecting environmental sustainability in densely populated northern India. Effective mitigation of BC impact is hampered by highly uncertain emission source estimates. Here, we use dual-carbon isotope fingerprints (delta C-13/Delta C-14) of BC to constrain the seasonal source variability in Delhi. These measurements show that lower BC concentrations in summer are predominantly from fossil fuel sources (similar to 83%). However, large-scale open burning of post-harvest crop residue/wood in nearby rural regions is contributing to severe haze pollution in Delhi during winter and autumn (similar to 42 +/- 17%). Hence, the common conception that megacities affect their surroundings is here amended or seasonally reversed. Therefore, to combat the severe air pollution problems in Delhi and the environmental quality of northern India, current urban efforts need to be complemented with countryside regional mitigation.

Stable nitrogen isotopes (delta N-15) are used as indicators of trophic position (TP) of consumers. Deriving TP from delta N-15 of individual amino acids (AAs) is becoming popular in ecological studies, because of lower uncertainty than TP based on bulk delta N-15 (TPbulk). This method would also facilitate biomagnification studies provided that isotope fractionation is unaffected by toxic exposure. We compared TPAA and TPbulk estimates for a sediment-dwelling bivalve from two coastal sites, a pristine and a contaminated. Chemical analysis of PCB levels in mussels, sediments, and pore water confirmed the expected difference between sites. Both methods, but in particular the TPAA underestimated the actual TP of bivalves. Using error propagation, the total uncertainty related to the analytical precision and assumptions in the TP calculations was found to be similar between the two methods. Interestingly, the significantly higher intercept for the regression between T-AA, and TPbulk in the contaminated site compared to the pristine site indicates a higher deamination rate due to detoxification as a result of chronic exposure and a higher N-15 fractionation. Hence, there is a need for controlled experiments on assumptions underlying amino acid-specific stable isotope methods in food web and bimagnification studies.

Pleistocene ice complex permafrost deposits contain roughly a quarter of the organic carbon (OC) stored in permafrost (PF) terrain. When permafrost thaws, its OC is remobilized into the (aquatic) environment where it is available for degradation, transport or burial. Aquatic or coastal environments contain sedimentary reservoirs that can serve as archives of past climatic change. As permafrost thaw is increasing throughout the Arctic, these reservoirs are important locations to assess the fate of remobilized permafrost OC. We here present compound-specific deuterium (delta H-2) analysis on leaf waxes as a tool to distinguish between OC released from thawing Pleistocene permafrost (ice complex deposits; ICD) and from thawing Holocene permafrost (from near-surface soils). Bulk geochemistry (%OC; delta C-13; % total nitrogen, TN) was analyzed as well as the concentrations and delta H-2 signatures of long-chain n-alkanes (C-21 to C-33) and midto long-chain n-alkanoic acids (C-16 to C-30) extracted from both ICD-PF samples (n = 9) and modern vegetation and Ohorizon (topsoil-PF) samples (n = 9) from across the northeast Siberian Arctic. Results show that these topsoil-PF samples have higher %OC, higher OC/TN values and more depleted delta(COC)-C-13 values than ICD-PF samples, suggesting that these former samples trace a fresher soil and/or vegetation source. Whereas the two investigated sources differ on the bulk geochemical level, they are, however, virtually indistinguishable when using leaf wax concentrations and ratios. However, on the molecular isotope level, leaf wax biomarker delta H-2 values are statistically different between topsoil PF and ICD PF. For example, the mean delta H-2 value of C-29 n-alkane was -246 +/- 13% (mean +/- SD) for topsoil PF and -280 +/- 12 parts per thousand for ICD PF. With a dynamic isotopic range (difference between two sources) of 34 to 50 parts per thousand; the isotopic fingerprints of individual, abundant, biomarker molecules from l

Methyl chloride and methyl bromide (CH3Cl and CH3Br) are the largest natural sources of chlorine and bromine, respectively, to the stratosphere, where they contribute to ozone depletion. We report the anthropogenic production of CH3Cl and CH3Br during breadbaking, and suggest this production is an abiotic process involving the methyl ester functional groups in pectin and lignin structural polymers of plant cells. Wide variations in baking styles allow only rough estimates of this flux of methyl halides on a global basis. A simple model suggests that CH3Br emissions from breadbaking likely peaked circa 1990 at approximately 200 tonnes per year (about 0.3% of industrial production), prior to restrictions on the dough conditioner potassium bromate. In contrast, CH3Cl emissions from breadbaking may be of similar magnitude as acknowledged present-day CH3Cl industrial emissions. Because the mechanisms involve functional groups and compounds widely found in plant materials, this type of methyl halide production may occur in other cooking techniques as well.

RationaleThe environmental occurrence of chlorinated acetic acids (CAAs) has been extensively studied, but the sources and transport are still not yet fully understood. A promising approach for source apportionment and process studies is the isotopic characterization of target compounds. We present the first on-line stable chlorine isotope analysis of CAAs by use of gas chromatography/quadrupole mass spectrometry (GC/qMS). MethodsFollowing approved procedures for concentration analysis, CAAs extracted into MTBE were methylated to GC-amenable methyl esters (mCAAs). These mCAAs were then analyzed by GC/qMS for their stable chlorine isotope composition using a sample/standard-bracketing approach (CAA standards in the range Cl-37 -6.3 to -0.2 , Standard Mean Ocean Chloride). ResultsCross-calibration of the herein presented method with off-line reference methods (thermal ionization and continuous-flow GC isotope ratio mass spectrometry; TI-MS and CF-GC/IRMS, respectively) shows good agreement between the methods (regression slope for GC/qMS vs reference method data sets: 0.92 +/- 0.29). Sample amounts as small as 10 pmol Cl can herewith be analyzed with a precision of 0.1 to 0.4 parts per thousand. ConclusionsThis method should be useful for environmental studies of CAAs at ambient concentrations in precipitations (<0.06 to 100nmolL(-1)), surface waters (<0.2 to 5nmolL(-1)) and soil (<0.6 to 2000nmolkg(-1) dry soil) where conventional off-line methods cannot be applied.

info:eu-repo/semantics/published

info:eu-repo/semantics/published

The widespread use of chlorinated phenols (CPs) as a wood preservative has led to numerous contaminated sawmill sites. However, it remains challenging to assess the extent of in situ degradation of CPs. We evaluated the use of compound-specific chlorine and carbon isotope analysis (Cl- and C-CSIA) to assess CP biotransformation. In a laboratory system, we measured isotopic fractionation during oxidative 2,4,6-trichlorophenol dechlorination by representative soil enzymes (C. fumago chloroperoxidase, horseradish peroxidase, and laccase from T. versicolor). Using a mathematical model, the validity of the Rayleigh approach to evaluate apparent kinetic isotope effects (AKIE) was confirmed. A small but significant Cl-AKIE of 1.0022 ± 0.0006 was observed for all three enzymes, consistent with a reaction pathway via a cationic radical species. For carbon, a slight inverse isotope effect was observed (C-AKIE = 0.9945 ± 0.0019). This fractionation behavior is clearly distinguishable from reported reductive dechlorination mechanisms. Based on these results we then assessed degradation and apportioned different types of technical CP mixtures used at two former sawmill sites. To our knowledge, this is the first study that makes use of two-element CSIA to study sources and transformation of CPs in the environment.

Two-dimensional compound-specific isotope analysis (2D-CSIA), combining stable carbon and chlorine isotopes, holds potential for monitoring of natural attenuation of chlorinated ethenes (CEs), in contaminated soil and groundwater. However, interpretation of 2D-CSIA data sets is challenged by a shortage of experimental Cl isotope enrichment factors. Here, isotope enrichments factors for C and Cl (i.e., epsilon(C) and epsilon(Cl)) were determined for biodegradation of tetrachloroethene (PCE) and trichloroethene (TCE) using microbial enrichment cultures from a heavily CE-contaminated aquifer. The obtained values were epsilon(C) = -5.6 +/- 0.7 parts per thousand (95% CI) and epsilon(Cl) = -2.0 +/- 0.5 parts per thousand for PCE degradation and epsilon(C) = -8.8 +/- 0.2 parts per thousand and epsilon(Cl) = -3.5 +/- 0.5 parts per thousand for TCE degradation. Combining the values for both epsilon(C) and epsilon(Cl) yielded mechanism-diagnostic epsilon(Cl)/epsilon(C) ratios of 0.35 +/- 0.11 and 0.37 +/- 0.11 degradation of PCE and TCE, respectively. Application of the obtained epsilon(C) and epsilon(Cl) values to a previously investigated field site gave similar estimates for the fraction of degraded contaminant as in the previous study, but with a reduced uncertainty in assessment of the natural attenuation. Furthermore, 16S rRNA gene clone library analyses were performed on three samples from the PCE degradation experiments. A species closely related to Desulfitobacterium aromaticivorans UKTL dominated the reductive dechlorination process. This study contributes to the development of 2D-CSIA as a tool for evaluating remediation strategies of CEs at contaminated sites., AuthorCount:10

Chlorinated ethenes (CEs) are ubiquitous groundwater contaminants, yet there remains a need for a method to efficiently monitor their in situ degradation. We report here the first field application of combined stable carbon and chlorine isotope analysis of tetrachloroethene (PCE) and trichloroethene (TCE) to investigate their biodegradation in a heavily contaminated aquifer. The two-dimensional Compound Specific Isotope Analysis (2D-CSIA) approach was facilitated by a recently developed gas chromatography-quadrupole mass spectrometry (GCqMS) method for delta Cl-37 determination. Both C and Cl isotopes showed evidence of ongoing PCE transformation. Applying published C isotope enrichment factors (epsilon(C)) enabled evaluation of the extent of in situ PCE degradation (11-78%). We interpreted C and Cl isotopes using a numerical reactive transport model along a 60-m flow path. It revealed that combined PCE and TCE mass load was dechlorinated by less than 10%, and that cis-dichloroethene was not further dechlorinated. Furthermore, the 2D-CSIA approach allowed estimation of Cl isotope enrichment factors epsilon(Cl) (-7.8 to -0.8 parts per thousand) and characteristic epsilon(Cl)/epsilon(C) values (0.42-1.12) for reductive PCE dechlorination at this field site. This investigation demonstrates the benefit of 2D-CSIA to assess in situ degradation of CEs and the applicability of Cl isotope fractionation to evaluate PCE and TCE dechlorination., AuthorCount:8

Meeting abstract

Methyl bromide is the most important natural bromine contributor to stratospheric ozone depletion, yet there are still large uncertainties regarding quantification of its sources and sinks. The stable bromine isotope composition of CH(3)Br is potentially a powerful tool to apportion its sources and to study both its transport and its reactive fate. A novel compound-specific method to measure (81)Br/(79)Br isotope ratios in CH3Br using gas chromatography hyphenated with inductively coupled plasma multiple-collector mass spectrometry (GC/MCICPMS) was developed. Sample amounts of >40 ng could bemeasured with a precision of 0.1 parts per thousand (1 sigma, n=3). The method results are reproducible over the long term as shown with 36 analyses acquired over 3 months, yielding a standard deviation ( 1s) better than 0.4 parts per thousand. This new method demonstrates for the first time Br isotope ratio determination in gaseous brominated samples. It is three orders of magnitude more sensitive than previously existing isotope ratio mass spectrometry methods for Br isotope determination of other organobromines, thus allowing applications towards ambient atmospheric samples., authorCount :7

AB The stable bromine isotopic composition (delta(81)Br) was determined for six industrially synthesised brominated organic compounds (BOCs) and one natural BOC by gas-chromatography multi-collector inductively coupled plasma mass spectrometry (GC-mcICP-MS). The delta(81)Br compositions of brominated benzenes, phenols (both natural and industrial), anisoles, and naphthalenes were constrained with the standard differential measurement approach using as reference a monobromobenzene sample with an independently determined delta(81)Br value (-0.39 parts per thousand v. Standard Mean Ocean Bromide, SMOB). The delta(81)Br values for the industrial BOCs ranged from -4.3 to -0.4 parts per thousand. The average delta(81)Br value for the natural compound (2,4-dibromophenol) was 0.2 +/- 1.6% (1 s.d.), and for the identical industrial compound (2,4-dibromophenol) -1.1 +/- 0.9 parts per thousand (1 s.d.), with a statistically significant difference of similar to 1.4 (P<0.05). The delta(81)Br of four out of six industrial compounds was found to be significantly different from that of the natural sample. These novel results establish the bromine isotopic variability among the industrially produced BOCs in relation to a natural sample., authorCount :7

n/a

A method has been developed for the direct determination of the stable chlorine isotope composition (delta(37)Cl) of organochlorines that eliminates sample preparation, achieves precision comparable to earlier techniques while improving the sensitivity, and makes use of benchtop gas chromatography-quadrupole mass spectrometry instruments (GCqMS). The method is based on the use of multiple injections (n = 8-10) of the sample, bracketed by a molecularly identical isotopic standard with known delta(37)Cl, determined using off-line thermal ionization mass spectrometry (TIMS). Mass traces of two isotopologues differing by one chlorine isotope were used to calculate delta(37)Cl values. Optimization of mass spectrometry and peak integration parameters as well as method validation was achieved using tetrachloroethene (PCE), p,p'-dichlorodiphenyltrichloroethane (DDT), and pentachlorophenol (PCP), spanning a delta(37)Cl range of -5.5 to +3.2 per thousand vs SMOC. Injecting 1.6-1100 pmol resulted in standard deviations (1sigma) of 0.6-1.3 per thousand, and the delta(37)Cl results agreed with values independently measured with TIMS. The method was tested by determining the Rayleigh fractionation during evaporation of pure liquid PCE, resulting in a chlorine isotopic enrichment factor of epsilon(Cl) = -1.1 +/- 0.4 per thousand. Furthermore, position-specific delta(37)Cl analysis based on analysis of DDT mass fragments was evaluated. The GCqMS-delta(37)Cl method offers a simplified yet sensitive approach for compound-specific chlorine isotope analysis.

The bromine isotope composition is potentially diagnostic in both degradation monitoring and source apportionment of organobromines in the environment. A method for compound-specific bromine isotope analysis (delta Br-81) based on gas chromatography multiple collector inductively coupled plasma mass spectrometry (GC/ICPMS) was developed for common brominated diaromatic compounds. Brominated diphenyl ethers (BDEs) in Bromkal 70-5DE, a technical flame-retardant mixture containing mainly BDEs #47, #99 and #100, were used as test substances, with standard bracketing for the samples achieved through co-injected monobromobenzene (MBB) with a known delta Br-81 of -0.39 parts per thousand vs. Standard Mean Ocean Bromine (SMOBr). Three different heated transfer lines were constructed and tested to achieve efficient conduction of the BDEs from the gas chromatograph to the ICPMS instrument. The MBB was analyzed with a precision of 0.4 parts per thousand (1 s, n = 18). The precision for BDEs was 1.4-1.8 parts per thousand (1 s, n = 10-12 depending on the congener). The lower precision for the BDEs than for MBB may reflect the heat required to prevent condensation of the analytes in ICP torch assembly. The use of an internal standard of similar chemical structure to the analytes alleviates this problem, as illustrated by a difference of 0.3 +/- 0.7 parts per thousand (1 s, n = 6) between the (delta Br-81 values of co-injected methoxy BDE-47 and BDE-47 extracted from whale blubber. Improvements in precision and accuracy may be achieved by the use of a more efficient heating of the torch assembly in conjunction with a set of internal standards that match the target compounds., authorCount :5

Compound-specific Cl-isotope analysis was performed on the persistent and bioaccumulating compound tris-(4-chlorophenyl)methane (4,4',4 ''-TCPMe, referred to as TCPMe in this study) to elucidate whether its main source is natural or anthropogenic. Blubber from the Baltic grey seal (Halichoerus grypus) was extracted by continuous acetonitrile partitioning, and the TCPMe was isolated from the extract by preparative-capillary gas chromatography. Chlorine isotope analysis was subsequently performed by sealed-tube combustion in conjunction with thermal-ionization mass spectrometry (TIMS). The delta Cl-37 of TCPMe was -3.5 +/- 0.5 parts per thousand, similar to the previously reported delta Cl-37 of technical grade p,p'-DDT (referred to as DDT in this study). The data is not consistent with a putative marine natural source of TCPMe, as enzymatic (biotic) production is reported to give values of delta Cl-37 < - 10 parts per thousand. The delta Cl-37-TCPMe data thus supports the hypothesis that TCPMe is produced as a byproduct during DDT synthesis and is released to the environment through the same pathways as DDT. It is also consistent with tris-(4-chlorophenyl)methanol as the primary biotransformation product of TCPMe., authorCount :5

Part of urn:nbn:se:su:diva-937

Part of urn:nbn:se:su:diva-937