Search

Metafibers, by integrating metasurface at the optical fiber tip, are emerging as the significant optical coupling platforms for nanophotonics and fiber-optic communities. Here, we propose a plasmonic metafiber for converting the fundamental mode to first-order mode in fiber, and as proof of device performance, demonstrate an all-fiber Q-switched cylindrical vector laser using the metafiber. Based on polarization-dependent plasmonic resonance, a polarization-independent mode conversion metasurface is designed theoretically and numerically, fabricated directly on fiber facet, and packaged as an all-fiber component with efficiency up to 21% at 1550-nm band. Using the metafiber in an all-fiber laser, Q-switched azimuthally polarized beam (APB) and radially polarized beam (RPB) are delivered at wavelength of 1548.5 nm with pulse durations from ∼7 to ∼2 μs when pump power increases from 30 to 120 mW. The mode purities of the APB and RPB are 86.5% and 90.7%, respectively. This work outlines a new strategy to integrate metasurfaces into “all-in-fiber” systems and offers a reliable route to construct next-generation laser sources, such as all-fiber ultrafast structured lasers.

Currently, intercalation has become an effective way to modify the fundamental properties of two-dimensional (2D) van der Waals (vdW) materials. Using density functional theory, we systematically investigated the structures and electronic and magnetic properties of bilayer transition metal dichalcogenides (TMDs) intercalated with 3d TM atoms (TM = Sc–Ni), TM@BL_MS2 (M = Mo, V). Our results demonstrate that all the studied TM@BL_MS2s are of high stability, with large binding energies and high diffusion barriers of TM atoms. Interestingly, most TM@BL_MoS2s and TM@BL_VS2s are found to be stable ferromagnets. Among them, TM@BL_MoS2s (TM = Sc, Ti, Fe, Co) are ferromagnetic metals, TM@BL_MoS2 (TM = V, Cr) and TM@BL_VS2 (TM = Sc, V) are ferromagnetic half-metals, and the remaining systems are found to be ferromagnetic semiconductors. Exceptions are found for Ni@BL_MoS2 and Cr@BL_VS2, which are nonmagnetic semiconductors and ferrimagnetic half-metals, respectively. Further investigations reveal that the electromagnetic properties of TM@BL_MoS2 are significantly influenced by the concentration of intercalated TM atoms. Our study demonstrates that TM atom intercalation is an effective approach for manipulating the electromagnetic properties of two-dimensional materials, facilitating their potential applications in spintronic devices. [ABSTRACT FROM AUTHOR]

Objective To evaluate the necessity and safety of performing endoscopic retrograde cholangiopancreatography (ERCP) during the pandemic of Coronavirus Disease-2019 (COVID-19) and to share our experience. Methods Clinical data from 174 patients who underwent ERCP procedures in department of surgery and department of emergency Ruijin Hospital, during the period from 17 January 2020 to 19 May 2020 as study group were analyzed retrospectively. All procedures were carried out under strict protective measures. Data from 230 patients who received ERCP during the same period last year were analyzed as control group. The medical records of patients were compared between two groups inclu-ding clinical characteristics, indications, ERCP procedure and duration, complications and hospital stay. Results The cases with biliary and pancreatic malignant obstruction in study group (52, 29.9%) increased significantly compared with those in control group (41, 17.8%) (P=0.004), while the patients of scheduled second ERCP significantly decreased [2(1.1%) vs. 33(14.3%), P

Lead selenide (PbSe) is a new emerging semiconductor with layer-dependent bandgap that has attracted much interest due to its high infrared response and good environmental stability. We have prepared large-scale PbSe films with the area of 7 cm2 and thickness of 25 nm based on physical vapor deposition approach at 160°C. The PbSe films exhibit saturable absorption property at 1.55 μm and a polarization-sensitive saturable absorber is obtained by growing PbSe on D-shaped fiber. Single-pulse with the duration of 490 fs is generated at the pump of 12 mW and the mode-locking operation is maintained at the pump of 1500 mW, indicating the high damage threshold of the D-shaped fiber based saturable absorber. Two polarization-insensitive saturable absorbers are achieved by depositing PbSe on fiber facet and polyvinyl alcohol film, respectively. For fiber facet (polyvinyl alcohol film) based saturable absorber, the repetition rate of Q-switched pulses increases from 8.6 (16.3) kHz to 45.4 (59.2) kHz while the duration decreases from 7.92 (12) μs to 2.06 (3.12) μs by tuning the pump from 15 mW to 90 (60) mW. Such large-scale PbSe films possess features of low cost and high modulation ability, and can find important applications in infrared optical modulators and detectors.

Lead selenide (PbSe) is a new emerging semiconductor with layer-dependent bandgap that has attracted much interest due to its high infrared response and good environmental stability. We have prepared large-scale PbSe films with the area of 7 cm2 and thickness of 25 nm based on physical vapor deposition approach at 160°C. The PbSe films exhibit saturable absorption property at 1.55 μm and a polarization-sensitive saturable absorber is obtained by growing PbSe on D-shaped fiber. Single-pulse with the duration of 490 fs is generated at the pump of 12 mW and the mode-locking operation is maintained at the pump of 1500 mW, indicating the high damage threshold of the D-shaped fiber based saturable absorber. Two polarization-insensitive saturable absorbers are achieved by depositing PbSe on fiber facet and polyvinyl alcohol film, respectively. For fiber facet (polyvinyl alcohol film) based saturable absorber, the repetition rate of Q-switched pulses increases from 8.6 (16.3) kHz to 45.4 (59.2) kHz while the duration decreases from 7.92 (12) μs to 2.06 (3.12) μs by tuning the pump from 15 mW to 90 (60) mW. Such large-scale PbSe films possess features of low cost and high modulation ability, and can find important applications in infrared optical modulators and detectors. [ABSTRACT FROM AUTHOR]

High-order mode fiber lasers are gathering the rising attentions from fundamental researches to practical applications due to their distinctive spatial and temporal properties. Here, we demonstrate a carbon nanotube mode-locked two-mode fiber laser and investigate the formation and evolution process of the soliton based on the time-stretch dispersive Fourier transform method. Stable single pulse and bound-state pulses are observed at pump powers of 32.0 and 41.3 mW, respectively. Attributing to the coexistence of fundamental mode and first group high-order modes, the optical spectrum exhibits slight intensity modulations and the autocorrelation trace shows additional small side lobes. Similar to that of single-mode fiber lasers, the buildup process of soliton includes the relaxation oscillation, beating behavior, and stable mode-locking state. However, owing to the interplay between two transverse modes in the two-mode fiber laser, the duration and fluctuation intensity of the relaxation oscillation are much larger than that of single-mode fiber lasers. [ABSTRACT FROM AUTHOR]