Search

We introduce a study examining people’s privacy concerns in the time of Covid-19 and we reflect on people’s willingness to share their personal data in the interest of controlling the spread of the virus and save lives.

Nowadays, the object detection techniques have been developed rapidly for different applications, ranging from remote sensing to autonomous vehicles. We demonstrate identification of object open angle and direction using machine learning (ML) algorithms based on received light beam’s intensity profiles. Compared with previous optical orbital-angular-momentum (OAM) spectrum system and other related works, our proposed technique only uses a single-shot image, and can efficiently reduce the complexity of hardware implementation. Specifically, we verify the reliability of the simulation results experimentally for 14 open angles and 32 directions. Experimental result shows that convolutional neural network (CNN) outperforms the other traditional ML algorithms, such as decision tree (DT), k-nearest neighbor algorithm (KNN), and support vector machine (SVM). As one of the variant of CNN, MobileNet (MN) has relatively simplified iteration algorithm than VGG-like net. It reduces the computational power, while still maintaining high accuracy for identification issues.

Contact tracing apps used in tracing and mitigating the spread of COVID-19 have sparked discussions and controversies worldwide with major concerns around privacy. COVID Tracker app used in the Republic of Ireland was praised in general for the way it addressed privacy and was used as baseline for other contact tracing apps worldwide. The success of the app is dependent on the general public uptake, hence their voice and attitude is the one that really matters. This paper focuses on developing a survey and the methods aiming to examine the attitudes toward privacy during COVID-19 of the general public in the Republic of Ireland and their impact on the uptake of the COVID tracker app. Various privacy models are used and health belief model as well in this purpose. A pilot study with 286 participants show a change in attitude towards privacy during COVID-19 pandemic, with more people willing to share their data in the interest of saving lives. However, privacy attitudes are shown to have impacted the adoption of the app in Ireland.

Contact tracing apps used in tracing and mitigating the spread of COVID-19 have sparked discussions and controversies worldwide. The major concerns in relation to these apps are around privacy. Ireland was in general praised for the design of its COVID tracker app, and the transparency through which privacy issues were addressed. However, the ”voice” of the Irish public was not really heard or analysed. This study aimed to analyse the Irish public sentiment towards privacy and COVID tracker app. For this purpose we have conducted sentiment analysis on Twitter data collected from public Twitter accounts from Republic of Ireland. We collected COVID-19 related tweets generated in Ireland over a period of time from January 1, 2020 up to December 31, 2020 in order to perform sentiment analysis on this data set. Moreover, the study performed sentiment analysis on the feedback received from a national survey on privacy conducted in Republic of Ireland. The findings of the study reveal a significant criticism towards the app that relate to privacy concerns, but other aspects of the app as well. The findings also reveal some positive attitude towards the fight against COVID-19, but these are not necessarily related to the technological solutions employed for this purpose. The findings of the study contributed to the formulation of useful recommendations communicated to the relevant Irish actors.

MEX-3C, a novel RNA binding E3 ubiquitin ligases, contains two N-terminal heterogeneous nuclear ribonucleoprotein K homology (KH) domains and C-terminal Ring finger domain. Recent evidence has suggested that human MEX-3C has a strong bondage with carcinogenesis and the MEX-3C-mediated ubiquitination of RIG-I is essential for the antiviral innate immune response. Moreover, the Ring finger domain of MEX-3C could regulate the degradation of HLA-A2 (an MHC-I allotype) mRNA with a novel mechanism. However, the structural basis for the ubiquitination catalyzed by hMEX-3C Ring finger domain remains evasive. In this study, we solved the crystal structure of dimeric Ring finger domain of hMEX-3C and compared it with the complex structure of MDM2/MDMX-UbcH5b-Ub. Our ubiquitination assay demonstrated that the Ring finger domain of hMEX-3C acts as a ubiquitin E3 ligase in vitro, cooperating with specific E2 to mediate ubiquitination. Then, we identified several key residues in Ring finger domain of hMEX-3C possibly involved in the interaction with E2-Ub conjugate and analyzed the E3 ligase activities of wild type and mutants at key sites. Additionally, zinc chelation experiments indicated that the intact structural stability is essential for the self-ubiquitination activity of the Ring finger domain of hMEX-3C. Taken together, our studies provided new insight into the mechanism of the Ring finger domain of hMEX-3C that may play an important role in eliciting antiviral immune responses and therapeutic interventions.

We explore the use of orbital-angular-momentum (OAM)-multiplexing to increase the capacity of free-space data transmission to moving platforms, with an added potential benefit of decreasing the probability of data intercept. Specifically, we experimentally demonstrate and characterize the performance of an OAM-multiplexed, free-space optical (FSO) communications link between a ground transmitter and a ground receiver via a moving unmanned-aerial-vehicle (UAV). We achieve a total capacity of 80 Gbit/s up to 100-m-roundtrip link by multiplexing 2 OAM beams, each carrying a 40-Gbit/s quadrature-phase-shift-keying (QPSK) signal. Moreover, we investigate for static, hovering, and moving conditions the effects of channel impairments, including: misalignments, propeller-induced airflows, power loss, intermodal crosstalk, and system bit error rate (BER). We find the following: (a) when the UAV hovers in the air, the power on the desired mode fluctuates by 2.1 dB, while the crosstalk to the other mode is −19 dB below the power on the desired mode; and (b) when the UAV moves in the air, the power fluctuation on the desired mode increases to 4.3 dB and the crosstalk to the other mode increases to −10 dB. Furthermore, the channel crosstalk decreases with an increase in OAM mode spacing.

Line-of-sight wireless communications can benefit from the simultaneous transmission of multiple independent data streams through the same medium in order to increase system capacity. A common approach is to use conventional spatial multiplexing with spatially separated transmitter/receiver antennae, for which inter-channel crosstalk is reduced by employing multiple-input-multiple-output (MIMO) signal processing at the receivers. Another fairly recent approach to transmitting multiple data streams is to use orbital-angular-momentum (OAM) multiplexing, which employs the orthogonality among OAM beams to minimize inter-channel crosstalk and enable efficient (de)multiplexing. In this paper, we explore the potential of utilizing both of these multiplexing techniques to provide system design flexibility and performance enhancement. We demonstrate a 16 Gbit/s millimeter-wave link using OAM multiplexing combined with conventional spatial multiplexing over a short link distance of 1.8 meters (shorter than Rayleigh distance). Specifically, we implement a spatial multiplexing system with a $2\times 2$ antenna aperture architecture, in which each transmitter aperture contains two multiplexed 4 Gbit/s data-carrying OAM beams. A MIMO-based signal processing is used at the receiver to mitigate channel interference. Our experimental results show performance improvements for all channels after MIMO processing, with bit-error rates of each channel below the forward error correction limit of $3.8\times 10^{-3}$ . We also simulate the capacity for both the $4\times 4$ MIMO system and the $2\times 2$ MIMO with OAM multiplexing. Our work indicates that OAM multiplexing and conventional spatial multiplexing can be simultaneously utilized to provide design flexibility. The combination of these two approaches can potentially enhance system capacity given a fixed aperture area of the transmitter/receiver (when the link distance is within a few Rayleigh distances).

We explore the use of a switchable single-photon detector (SPD) array scheme to reduce the effect of a detector’s deadtime for a multi-bit/photon quantum link. The case of data encoding using M possible orbital-angular-momentum (OAM) states is specifically studied in this paper. Our method uses N SPDs with a controllable M × N optical switch and we use a Monte Carlo-based method to simulate the quantum detection process. The simulation results show that with the use of the switchable SPD array, the detection system can allow a higher incident photon rate than what might otherwise be limited by detectors’ deadtime. For the case of M = 4 , N = 20 , a 50-ns deadtime for the individual SPDs, an average photon number per pulse of 0.1, and under the limit that at most 10 % of the photon-containing pulses are missed, the switchable SPD array will allow an incident photon rate of 2250 million counts/s (Mcts/s). This is 25 times the 90 Mcts/s incident photon rate that a non-switchable, 4-SPD array will allow. The increase in incident photon rate is more than the 5 times increase, which is the simple increase in the number of SPDs and the number of OAM encoding states (e.g., N ∕ M = 20 ∕ 4 ).

We experimentally investigate the scattering effect on an 80 Gbit/s orbital angular momentum (OAM) multiplexed optical wireless communication link. The power loss, mode purity, cross talk, and bit error rate performance are measured and analyzed for different OAM modes under scattering levels from ballistic to diffusive regions. Results show that (i) power loss is the main impairment in the ballistic scattering, while the mode purities of different OAM modes are not significantly affected; (ii) in the diffusive scattering, however, the performance of an OAM-multiplexed link further suffers from the increased cross talk between the different OAM modes.

We simulate and experimentally demonstrate the optical single-pixel identification of two-dimensional (2D) objects by analyzing the corresponding complex-valued (i.e, amplitude and phase) Laguerre–Gaussian​ ( LG l , p ) spectra containing both the azimuthal (i.e., l ) and radial (i.e., p ) indices. A sequence of optical beams, each carrying a different superposition of one LG mode and one fundamental Gaussian mode, propagate through the objects. The amplitude and phase contributions of each LG modal component are then obtained by four sequential power measurements using a single-pixel detector. We reconstruct the 2D spatial structures of fan-shaped objects with different orientation angles and an “SC” logo using the measured complex LG spectra that contain 31 different azimuthal and 31 different radial index values. The simulation and experimental results show that (i) the minima positions of the amplitude-only LG sub-spectra (fixed l = 0 , varying p ) are dependent on the object’s spatial information along its radial direction, (ii) the amplitude-only LG spectrum is likely to be insensitive to the object’s orientation angle, and (iii) the slopes of the phase-only LG sub-spectra (fixed p , varying l ) are linearly proportional to the object’s orientation angle.

We demonstrate an optical recirculating delay loop by shifting the spatial mode order of orbital-angular-momentum (OAM) beams in the free-space. The desired delay can be selected at the loop output by exploiting the orthogonality of the OAM modes. When sending a 20-Gbaud quadrature-phase-shift-keyed (QPSK) signal through the delay system, three recirculations are demonstrated, each with an additional delay of 2.2 ns. Around 0.5 and 2 dB system penalties are measured for the second and third recirculations, respectively. We also simulate the performance of our approach under different scenarios.

Gene regulatory mechanisms rely on a complex network of RNA processing factors to prevent untimely gene expression. In fission yeast, the highly conserved ortholog of human ERH, called Erh1, interacts with the YTH family RNA binding protein Mmi1 to form the Erh1-Mmi1 complex (EMC) implicated in gametogenic gene silencing. However, the structural basis of EMC assembly and its functions are poorly understood. Here, we present the co-crystal structure of the EMC that consists of Erh1 homodimers interacting with Mmi1 in a 2:2 stoichiometry via a conserved molecular interface. Structure-guided mutation of the Mmi1Trp112 residue, which is required for Erh1 binding, causes defects in facultative heterochromatin assembly and gene silencing while leaving Mmi1-mediated transcription termination intact. Indeed, EMC targets masked in mmi1∆ due to termination defects are revealed in mmi1W112A. Our study delineates EMC requirements in gene silencing and identifies an ERH interface required for interaction with an RNA binding protein.

We experimentally demonstrate the four-fold multiplexing of Hermite–Gaussian (HGmn) or Laguerre–Gaussian (LGlp) modes to achieve a 400 Gbit/s quadrature-phase-shift-keyed (QPSK) free-space optical communication link. In this experiment, both modal indices for the HG and LG modes are simultaneously utilized to achieve a larger potential orthogonal modal space. Moreover, we also investigate and compare the effects of aperture size, lateral displacement, and rotation on the system. We measure the degree of performance degradation due to the following: (1) a receiver aperture with a limited size causes power loss and crosstalk for both HG and LG modes; (2) a lateral misalignment between the transmitter and receiver which leads to crosstalk for LG modes, but might not affect HG0n or HGm0 modes due to axial symmetry; and (3) a rotational misalignment between the transmitter and receiver which causes crosstalk for the HG modes, but does not tend to affect the LG modes due to azimuthal symmetry.

A single-end adaptive-optics (AO) module is experimentally demonstrated to mitigate the emulated atmospheric turbulence effects in a bi-directional quantum communication link, which employs orbital angular momentum (OAM) for data encoding. A classical Gaussian beam is used as a probe to detect the turbulence-induced wavefront distortion in the forward direction of the link. Based on the detected wavefront distortion, an AO system located on one end of the link is used to simultaneously compensate for the forward and backward channels. Specifically, with emulated turbulence and when the probe is turned on, the mode purity of photons carrying OAM l = 1 is improved by ~ 21 % with AO mitigation. We also measured the performance when encoding data using OAM { l = - 1 , + 2 } and { l = - 2 , + 1 } in the forward and backward channels, respectively, at 10 Mbit/s per channel with one photon per pulse on average. For this case, we found that the AO system could reduce the turbulence effects increased quantum-symbol-error-rate (QSER) by ~ 76 % and ~ 74 %, for both channels in the uni-directional and bi-directional cases, respectively. Similar QSER improvement is observed for the opposite direction channels in the bi-directional case.

In this Letter, we experimentally demonstrate beaconless beam displacement tracking for free-space optical communication link multiplexing multiple orbital angular momentum (OAM) beams, where the data-carrying OAM beams are used for position detection. 400 Gbit/s data transmission is demonstrated under emulated lateral displacement of up to ±10 mm with power penalties of less than 3 dB for all channels. Channel crosstalk is reduced by the beam tracking system to below −18 dB. Moreover, we investigate using a Gaussian beacon for beam displacement tracking, and achieve similar channel crosstalk and power penalties, compared with using the beaconless beam tracking.

Light beams can be characterized by their complex spatial profiles in both intensity and phase. Analogous to time signals, which can be decomposed into multiple orthogonal frequency functions, a light beam can also be decomposed into a set of spatial modes that are taken from an orthogonal basis. Such decomposition can potentially provide a tool for spatial spectrum analysis, which may enable stable, accurate, and robust extraction of physical object information that may not be readily achievable using traditional approaches. As a proof-of-concept example, we measure an object’s opening angle using orbital-angular-momentum (OAM) -based complex spectrum, achieving a >15 dB signal-to-noise ratio. Moreover, the dip (i.e., notch) positions of the OAM intensity spectrum are dependent on an object’s opening angle but independent of the opening’s angular orientation, whereas the slope of the OAM phase spectrum is dependent on the opening’s orientation but independent of the opening angle.

Analogous to time signals that can be composed of multiple frequency functions, we use uniquely structured orthogonal spatial modes to create different beam shapes. We tailor the spatial structure by judiciously choosing a weighted combination of multiple modal states within an orthogonal orbital angular momentum (OAM) basis set, creating desired beam intensity "shapes." The weights of the OAM beams to be combined forms a Fourier pair with the spatial intensity distribution in the azimuthal direction of the resultant beam. As an example, we simulate and experimentally create various beam shapes by designing the weights of the combined OAM beams. We also find that 6× higher localized power, as compared to traditional beam combining, could be achieved by coherently combining nine orthogonal OAM beams.

There is a continuing growth in the demand for data bandwidth, and the multiplexing of multiple independent data streams has the potential to provide the needed data capacity. One technique uses the spatial domain of an electromagnetic (EM) wave, and space division multiplexing (SDM) has become increasingly important for increased transmission capacity and spectral efficiency of a communication system. A subset of SDM is mode division multiplexing (MDM), in which multiple orthogonal beams each on a different mode can be multiplexed. A potential modal basis set to achieve MDM is to use orbital angular momentum (OAM) of EM waves. In such a system, multiple OAM beams each carrying an independent data stream are multiplexed at the transmitter, propagate through a common medium and are demultiplexed at the receiver. As a result, the total capacity and spectral efficiency of the communication system can be multiplied by a factor equal to the number of transmitted OAM modes. Over the past few years, progress has been made in understanding the advantages and limitations of using multiplexed OAM beams for communication systems. In this review paper, we highlight recent advances in the use of OAM multiplexing for high-capacity free-space optical and millimetre-wave communications. We discuss different technical challenges (e.g. atmospheric turbulence and crosstalk) as well as potential techniques to mitigate such degrading effects. This article is part of the themed issue ‘Optical orbital angular momentum’.

We propose and simulate the use of the unique intensity gradient of beams carrying orbital angular momentum (OAM) for tracking and localization of an object. We design a three-pixel detector structure to efficiently determine the intensity gradient of an OAM beam. The resultant intensity gradient is then used to calculate the offset direction and distance of the target object from the center of the OAM beam. Our simulation results indicate the following: (i) an OAM-based localization system can have a stronger control signal than the one generated from a Gaussian beam; (ii) an OAM+2 beam may generate a ∼5× stronger localization feedback signal but operates over half the target capture area as an OAM+1 beam; and (iii) our scheme will generally have two orders of magnitude lower accuracy but ∼2× larger coverage area as the distance from the beam emitter to the target increases from 200 to 1000 m.

Structured light refers to the generation and application of custom light fields. As the tools and technology to create and detect structured light have evolved, steadily the applications have begun to emerge. This roadmap touches on the key fields within structured light from the perspective of experts in those areas, providing insight into the current state and the challenges their respective fields face. Collectively the roadmap outlines the venerable nature of structured light research and the exciting prospects for the future that are yet to be realized.

Electromagnetic waves carrying orbital angular momentum (OAM) have been used for mode division multiplexing in free-space communication systems to increase both the capacity and the spectral efficiency. In the case of conventional wireless communication links using non-OAM beams, multipath effects caused by beam spreading and reflection from the surrounding objects affect the system performance. This paper presents the results of analysis, simulations, and measurements of multipath effects in a millimetre-wave communication link using OAM multiplexing at 28 GHz. Multipath-induced intra- and inter-channel crosstalk, which are caused by specular reflection from a plane parallel to the propagation path, are analysed and measured. Both the simulation and the experimental results show that an OAM channel with a high OAM number ℓ tends to suffer from both strong intra-channel crosstalk and strong inter-channel crosstalk with other OAM channels. Results of the analysis show that this observation can be explained on the basis of both the properties of OAM beam divergence and the filtering effect at the receiver, which is associated with the spiral wavefront of OAM beams.

We demonstrate a 200-Gbit/s space-division multiplexing system using two Laguerre–Gaussian (LG) beams with different radial indices (LGl=0,p=0 and LGl=0,p=1). With a proper design of the radial change of the demultiplexing pattern, the channel crosstalk could be minimized and both channels could achieve a bit error rate of 3.8×10−3. Moreover, the multiplexing of four LG beams with different azimuthal indices and different radial indices (e.g., LGl=0,p=0, LGl=0,p=1, LGl=1,p=0, and LGl=1,p=1 beams) is also demonstrated with a

To increase system capacity of underwater optical communications, we employ the spatial domain to simultaneously transmit multiple orthogonal spatial beams, each carrying an independent data channel. In this paper, we multiplex and transmit four green orbital angular momentum (OAM) beams through a single aperture. Moreover, we investigate the degrading effects of scattering/turbidity, water current, and thermal gradient-induced turbulence, and we find that thermal gradients cause the most distortions and turbidity causes the most loss. We show systems results using two different data generation techniques, one at 1064 nm for 10-Gbit/s/beam and one at 520 nm for 1-Gbit/s/beam, we use both techniques since present data-modulation technologies are faster for infrared (IR) than for green. For the higher-rate link, data is modulated in the IR, and OAM imprinting is performed in the green using a specially-designed metasurface phase mask. For the lower rates, a green laser diode is directly modulated. Finally, we show that inter-channel crosstalk induced by thermal gradients can be mitigated using multi-channel equalisation processing., 26 pages, 5 figures

In this paper, we explore the potential benefits and limitations of using transmitter lenses in an orbital-angular-momentum (OAM)-multiplexed free-space optical (FSO) communication link. Both simulation and experimental results indicate that within certain transmission distances, using lenses at the transmitter to focus OAM beams could reduce power loss in OAM-based FSO links and that this improvement might be more significant for higher-order OAM beams. Moreover, the use of transmitter lenses could enhance system tolerance to angular error between transmitter and receiver, but they might degrade tolerance to lateral displacement.

We experimentally demonstrate and characterize the\ud performance of a 400-Gbit/s orbital angular momentum\ud (OAM) multiplexed free-space optical link over 120-\ud meters on the roof of a building. Four OAM beams, each\ud carrying a 100-Gbit/s QPSK channel are multiplexed and\ud transmitted. We investigate the influence of channel\ud impairments on the received power, inter-modal\ud crosstalk among channels, and system power penalties.\ud Without laser tracking and compensation systems, the\ud measured received power and crosstalk among OAM\ud channels fluctuate by 4.5 dB and 5 dB, respectively, over\ud 180 seconds. For a beam displacement of 2 mm that\ud corresponds to a pointing error less than 16.7 μrad, the\ud link bit-error-rates are below the forward error\ud correction threshold of 3.8×10-3 for all channels. Both\ud experimental and simulation results show that power\ud penalties increase rapidly when the displacement\ud increases.

We experimentally investigate the potential of using ‘self-healing’ Bessel-Gaussian beams carrying orbital-angular-momentum to overcome limitations in obstructed free-space optical and 28-GHz millimetre-wave communication links. We multiplex and transmit two beams (l = +1 and +3) over 1.4 metres in both the optical and millimetre-wave domains. Each optical beam carried 50-Gbaud quadrature-phase-shift-keyed data and each millimetre-wave beam carried 1-Gbaud 16-quadrature-amplitude-modulated data. In both types of links, opaque disks of different sizes are used to obstruct the beams at different transverse positions. We observe self-healing after the obstructions and assess crosstalk and power penalty when data is transmitted. Moreover, we show that Bessel-Gaussian orbital-angular-momentum beams are more tolerant to obstructions than non-Bessel orbital-angular-momentum beams. For example, when obstructions that are 1 and 0.44 the size of the l = +1 beam, are placed at beam centre, optical and millimetre-wave Bessel-Gaussian beams show ~6 dB and ~8 dB reduction in crosstalk, respectively.

In order to extend the speed-operation range for constant generating voltage or constant motoring power of the electrical machine, a new hybrid excitation machine with isolated magnetic paths (HEIMP) is presented in this paper. Its structure, operation mechanism, and two crucial design points are described in detail. A conceptual prototype machine is designed and manufactured in integration with a rotating-armature ac exciter (brushless). It is then simulated by finite element analysis software and tested in order to verify the efficient field-adjusting characteristics, the high efficiency, and the feasible design technique of the HEIMP machine. It is also shown that the integrated brushless design makes the system more compact and reliable.

We experimentally demonstrate a 10 Mbit/s free-space quantum communication link using data encoding on orthogonal Laguerre–Gaussian (LG) modes with the same azimuthal index but different radial indices. Data encoding on two LGlp modes (i.e., for l=0, we encode [“0”, “1”] as [p=0, p=1], and for l=1, we encode [“0”, “1”] as [p=0, p=1]) is demonstrated by employing directly modulated laser diodes and helical phase holograms. The quantum symbol error rate (QSER) of

Mode division multiplexing (MDM)– using a multimode optical fiber’s N spatial modes as data channels to transmit N independent data streams – has received interest as it can potentially increase optical fiber data transmission capacity N-times with respect to single mode optical fibers. Two challenges of MDM are (1) designing mode (de)multiplexers with high mode selectivity (2) designing mode (de)multiplexers without cascaded beam splitting’s 1/N insertion loss. One spatial mode basis that has received interest is that of orbital angular momentum (OAM) modes. In this paper, using a device referred to as an OAM mode sorter, we show that OAM modes can be (de)multiplexed over a multimode optical fiber with higher than −15 dB mode selectivity and without cascaded beam splitting’s 1/N insertion loss. As a proof of concept, the OAM modes of the LP11 mode group (OAM−1,0"Equation missing" and OAM+1,0), each carrying 20-Gbit/s polarization division multiplexed and quadrature phase shift keyed data streams, are transmitted 5km over a graded-index, few-mode optical fibre. Channel crosstalk is mitigated using 4 × 4 multiple-input-multiple-output digital-signal-processing with −3.

Vector modes are spatial modes that have spatially inhomogeneous states of polarization, such as, radial and azimuthal polarization. They can produce smaller spot sizes and stronger longitudinal polarization components upon focusing. As a result, they are used for many applications, including optical trapping and nanoscale imaging. In this work, vector modes are used to increase the information capacity of free space optical communication via the method of optical communication referred to as mode division multiplexing. A mode (de)multiplexer for vector modes based on a liquid crystal technology referred to as a q-plate is introduced. As a proof of principle, using the mode (de)multiplexer four vector modes each carrying a 20 Gbit/s quadrature phase shift keying signal on a single wavelength channel (~1550nm), comprising an aggregate 80 Gbit/s, were transmitted ~1m over the lab table with

We experimentally demonstrate spatial multiplexing of an orbital angular momentum (OAM)-encoded quantum channel and a classical Gaussian beam with a different wavelength and orthogonal polarization. Data rates as large as 100 MHz are achieved by encoding on two different OAM states by employing a combination of independently modulated laser diodes and helical phase holograms. The influence of OAM mode spacing, encoding bandwidth, and interference from the co-propagating Gaussian beam on registered photon count rates and quantum bit error rates is investigated. Our results show that the deleterious effects of intermodal crosstalk effects on system performance become less important for OAM mode spacing Δ≥2 (corresponding to a crosstalk value of less than -18.5 dB). The use of OAM domain can additionally offer at least 10.4 dB isolation besides that provided by wavelength and polarization, leading to a further suppression of interference from the classical channel.

We demonstrate the generation of orbital angular momentum (OAM) beams using high-efficient polarization-insensitive phase masks. The OAM beams generated by the phase masks are characterized in terms of their tolerance to misalignment (lateral displacement or tilt) between the incident beam and phase mask. For certain scenarios, our results show that (a) when the tilt angle is within the range of −20 to +20 deg, the crosstalk among modes is less than −15 dB; and (b) lateral displacement of 0.3 mm could cause a large amount of power leaked to adjacent modes. Finally, OAM beams generated by the phase masks are demonstrated over a two-channel OAM-multiplexing link, each channel carrying a 40 Gbit/s data stream. An optical signal-to-noise-ratio (OSNR) penalty of ∼1 dB is measured without crosstalk at the bit error rate (BER) of 3.8 × 10^(−3). With crosstalk, an OSNR penalty of

One property of electromagnetic waves that has been recently explored is the ability to multiplex multiple beams, such that each beam has a unique helical phase front. The amount of phase front ‘twisting’ indicates the orbital angular momentum state number, and beams with different orbital angular momentum are orthogonal. Such orbital angular momentum based multiplexing can potentially increase the system capacity and spectral efficiency of millimetre-wave wireless communication links with a single aperture pair by transmitting multiple coaxial data streams. Here we demonstrate a 32-Gbit s−1 millimetre-wave link over 2.5 metres with a spectral efficiency of ~16 bit s−1 Hz−1 using four independent orbital–angular momentum beams on each of two polarizations. All eight orbital angular momentum channels are recovered with bit-error rates below 3.8 × 10−3. In addition, we demonstrate a millimetre-wave orbital angular momentum mode demultiplexer to demultiplex four orbital angular momentum channels with crosstalk less than −12.5 dB and show an 8-Gbit s−1 link containing two orbital angular momentum beams on each of two polarizations., High speed data transmission using orbital angular momentum beams has been recently demonstrated. Here, Yan et al. demonstrate a 32 Gbit/s millimetre-wave communication link using eight coaxially propagating independent orbital angular momentum beams with four orbital angular momentum states on two orthogonal polarizations.

An intensity-only based algorithm is employed to compensate the turbulence effects on 50-Gbaud/s orbital angular momentum QPSK channels. By only measuring the intensity profile, the purity of the OAM beams is improved and crosstalk among channels is decreased., United States. Defense Advanced Research Projects Agency. Information in a Photon (InPho) Program, Intel Corporation

We experimentally demonstrate a reconfigurable 2 × 2 switch for orbital angular momentum (OAM) multiplexed data-carrying optical beams. The switch can be configured to operate in either ‘cross’ or ‘bar’ state for each of the input OAM-multiplexed channels. The switching operation is demonstrated by operating the switch in five different configurations for the four OAM-multiplexed 50 Gbaud QPSK channels. An OSNR penalty < 2.5 dB is observed for the switched beams.

Laguerre–Gaussian (LG) beams with different azimuthal indices are orthogonal to each other regardless of their radial indices. We investigate the potential advantage and impact of multiplexing LG beams with different azimuthal indices and nonzero radial indices, compared to LG beams with different azimuthal indices but zero radial index. Our simulation results show that LG beams with nonzero radial indices could help in receiving higher signal power in a free-space optical link under a certain short transmission distance range, especially when the receiver has a very limited aperture size. Our experimental demonstration shows a more than 6 dB received power improvement when multiplexing four LG beams with nonzero radial indices.

We demonstrate all-optical division and multiplication of the state order ℓ for data-carrying orbital angular momentum (OAM) beams. We use linear optical transformations between log-polar and Cartesian coordinates to: (i) divide the OAM state order to convert the OAM order from 2ℓ to ℓ (ℓ = −5, −4, …, +4, +5), and (ii) multiply the OAM state order from ℓ to 2ℓ. We analyze the OAM mode purity and the bit-error-rate performance of a classical two-mode OAM multiplexed link for the case of division and multiplication of the OAM state order. The experimental mode purity for halving and doubling OAM state order can reach around 87% and 40%, respectively. We further study the dependence of the OAM mode purity on the displacement of SLMs in simulation. The obtained results show that the transformation for doubling the OAM state order is more sensitive to the increase of the displacement than that for halving the OAM state order. The link bit error rates are below the forward error correction threshold of 3.8 × 10−3 for both channels.