Search

As populations increase and freshwater supplies decrease, adopting water- and energy-efficient irrigation practices is crucial, particularly in resource-constrained regions. Here, farmers are often unable to purchase the equipment used in precision irrigation, a practice that implements the automatic scheduling of irrigation events to achieve high efficiency. Currently, no irrigation methods exist that combine the automatic scheduling of irrigation events with the manual operation of valves, a common practice on low-income farms. This work introduces a design concept for an automatic scheduling and manual operation (AS-MO) tool that addresses the efficiency needs of resource-constrained farms and integrates into current manual practices. However, it is unknown how farmers would value such a tool. Through interviews and focus groups facilitated by a series of storyboards and a physical prototype, the proposed concept was evaluated by farmers and key market stakeholders in Kenya, Jordan, and Morocco. Results showed that farmers in Kenya and Jordan in particular valued the proposed AS-MO concept because they want increased efficiency on their farms but did not want to install automatic valves for cost and complexity concerns. A possible market was also found in Morocco, but a majority of interviewed farms preferred automatic valve operation due to large farm sizes. Interviewees provided feedback on how to improve the tool’s design in future iterations. If adopted at scale, this AS-MO tool could increase efficiency on farms that otherwise cannot afford current precision irrigation technology, improving sustainable agriculture worldwide.

Drip irrigation is a micro-irrigation technology that has been shown to conserve water and significantly increase crop yield. This technology could be particularly beneficial to the world’s estimated 500 million smallholder farmers, but drip systems tend to be financially inaccessible to this population. Drip systems require costly components including a pipe network, emitters, a pump and power system. Due to limited access to electricity, many smallholder farmers would require off-grid solutions. Designing reliable, low cost, off-grid drip irrigation systems for smallholder farms could significantly reduce the barrier to adoption. This paper builds on an integrated solar-powered drip irrigation model that was shown to improve upon an existing software. Field trials of the small-scale drip system were conducted on research farms in Jordan and Morocco for a full growing season. Data collected from these field trials are used to validate the hydraulics portion of the systems-level model. In addition, the insights gained from the field trials were formed into design requirements for future iterations of the model. These include optimizing for the system life cycle cost, as opposed to capital cost, the ability to simulate the system operation over a season, the capability to input a user’s irrigation schedule, incorporating locally-available components, and incorporating a system reliability constraint based on more detailed agronomic calculations.

Drip irrigation has the potential to conserve water and increase crop yields. However, existing drip irrigation systems often require high pumping power, making them financially inaccessible to smallholder farmers. Integrating a holistic system model with a cost-optimization scheme can enable the design and implementation of low-cost, solar-powered drip irrigations systems, ultimately making this technology more cost-effective for smallholder farmers. This paper describes the algorithms comprising an integrated model of solar-powered drip irrigation systems, consisting of agronomic, hydraulic, pump, and power system modules. It also introduces a preliminary optimization scheme for the power system, which uses the system hydraulics and pump curve to select an optimal solar array and energy storage configuration that minimizes capital cost. The system model and power system optimization is applied to three case studies, and the resulting power system configurations are compared to outputs from commercially-available software for sizing solar pumping systems. The results show that the model successfully captures the nuances in crop type, local weather patterns, and hydraulic system layout between different cases. This offers a greater level of flexibility than commercially available software, which tends to have broader applications and focuses on larger systems. Future model generations will add more variables to the optimization scheme — including pump selection, variable emitter flow rates and pipe geometries — to provide a versatile design tool for cost-optimized, solar-powered drip irrigation systems.

Copyright © 2019 ASME. In low income countries, existing drip irrigation systems are cost prohibitive to many smallholder farmers. Companies are working to develop efficient, low-cost irrigation systems by using technologies such as positive displacement (PD) pumps and pressure compensating (PC) emitters. However, these two technologies have not been paired in an efficient and cost-effective manner. Here we describe a proof-of-concept pump control algorithm that demonstrates the feasibility of exploiting the physical relationship between the input electrical power to a PD pump and the hydraulic behavior of a system of PC emitters in order to determine the optimal pump operating point. The development and validation of this control algorithm was conducted in partnership with the Kenya-based irrigation company SunCulture. This control method is expected to reduce cost, improve system efficiency, and increase accessibility of irrigation systems to smallholder farmers.

Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017., Cataloged from PDF version of thesis., Includes bibliographical references (page 39)., Flapping foils are the standard engineering approximation for many biological actuators in air and water, but these devices typically provide propulsion at the cost of parasitic oscillatory forces. The addition of in-line motion to a flapping foil trajectory can improve the control of the fluid force. Previous work has shown that by actuating the heave, surge, and pitch motions of a foil and iteratively optimizing the results, the lift and thrust forces on the foil can be precisely and independently controlled. In this thesis, the same experiment is modified to include solely passive pitch to determine if similar force control performance can be achieved without either a fully actuated pitch motion or an optimization process. In the new experiment, the fluid forces naturally drive the pitch motion for most of the flapping cycle, until the foil reaches a maximum pitch angle, which is set with a mechanical stopper. The hydrodynamic forces are recorded for a range of trajectories that include forwards in-line, backwards in-line, and no in-line motion. Lift force control improves over that of the fully actuated system, but thrust force control is not achieved to the same level of performance. Further work can be done to determine whether simple pitch angle control can be implemented to improve thrust force control without the addition of the optimization process., by Fiona Grant., S.B.

The European Multidisciplinary Seafloor and water-column Observatory (EMSO) European Research Infrastructure Consortium (ERIC) provides power, communications, sensors, and data infrastructure for continuous, high-resolution, (near-)real-time, interactive ocean observations across a multidisciplinary and interdisciplinary range of research areas including biology, geology, chemistry, physics, engineering, and computer science, from polar to subtropical environments, through the water column down to the abyss. Eleven deep-sea and four shallow nodes span from the Arctic through the Atlantic and Mediterranean, to the Black Sea. Coordination among the consortium nodes is being strengthened through the EMSOdev project (H2020), which will produce the EMSO Generic Instrument Module (EGIM). Early installations are now being upgraded, for example, at the Ligurian, Ionian, Azores, and Porcupine Abyssal Plain (PAP) nodes. Significant findings have been flowing in over the years; for example, high-frequency surface and subsurface water-column measurements of the PAP node show an increase in seawater pCO2 (from 339 μatm in 2003 to 353 μatm in 2011) with little variability in the mean air-sea CO2 flux. In the Central Eastern Atlantic, the Oceanic Platform of the Canary Islands open-ocean canary node (aka ESTOC station) has a long-standing time series on water column physical, biogeochemical, and acidification processes that have contributed to the assessment efforts of the Intergovernmental Panel on Climate Change (IPCC). EMSO not only brings together countries and disciplines but also allows the pooling of resources and coordination to assemble harmonized data into a comprehensive regional ocean picture, which will then be made available to researchers and stakeholders worldwide on an open and interoperable access basis.

More than 90% of the heat energy accumulation in the climate system between 1971 and the present has been in the ocean. Thus, the ocean plays a crucial role in determining the climate of the planet. Observing the oceans is problematic even under the most favourable of conditions. Historically, shipboard ocean sampling has left vast expanses, particularly in the Southern Ocean, unobserved for long periods of time. Within the past 15 years, with the advent of the global Argo array of pro ling oats, it has become possible to sample the upper 2,000 m of the ocean globally and uniformly in space and time. The primary goal of Argo is to create a systematic global network of pro ling oats that can be integrated with other elements of the Global Ocean Observing System. The network provides freely available temperature and salinity data from the upper 2,000 m of the ocean with global coverage. The data are available within 24 hours of collection for use in a broad range of applications that focus on examining climate-relevant variability on seasonal to decadal timescales, multidecadal climate change, improved initialization of coupled ocean–atmosphere climate models and constraining ocean analysis and forecasting systems.

This paper uses high-frequency bankside measurements from three catchments selected as part of the UK government-funded Demonstration Test Catchments (DTC) project. We compare the hydrological and hydrochemical patterns during the water year 2011–2012 from the Wylye tributary of the River Avon with mixed land use, the Blackwater tributary of the River Wensum with arable land use and the Newby Beck tributary of the River Eden with grassland land use. The beginning of the hydrological year was unusually dry and all three catchments were in states of drought. A sudden change to a wet summer occurred in April 2012 when a heavy rainfall event affected all three catchments. The year-long time series and the individual storm responses captured by in situ nutrient measurements of nitrate and phosphorus (total phosphorus and total reactive phosphorus) concentrations at each site reveal different pollutant sources and pathways operating in each catchment. Large storm-induced nutrient transfers of nitrogen and or phosphorus to each stream were recorded at all three sites during the late April rainfall event. Hysteresis loops suggested transport-limited delivery of nitrate in the Blackwater and of total phosphorus in the Wylye and Newby Beck, which was thought to be exacerbated by the dry antecedent conditions prior to the storm. The high rate of nutrient transport in each system highlights the scale of the challenges faced by environmental managers when designing mitigation measures to reduce the flux of nutrients to rivers from diffuse agricultural sources. It also highlights the scale of the challenge in adapting to future extreme weather events under a changing climate.

The Demonstration Test Catchments (DTC) project is a UK Government funded initiative to test the effectiveness of on-farm mitigation measures designed to reduce agricultural pollution without compromising farm productivity. Three distinct catchments in England have been chosen to test the efficacy of mitigation measures on working farms in small tributary sub-catchments equipped with continuous water quality monitoring stations. The Hampshire Avon in the south is a mixed livestock and arable farming catchment, the River Wensum in the east is a lowland catchment with predominantly arable farming and land use in the River Eden catchment in the north-west is predominantly livestock farming. One of the many strengths of the DTC as a national research platform is that it provides the ability to investigate catchment hydrology and biogeochemical response across different landscapes and geoclimatic characteristics, with a range of differing flow behaviours, geochemistries and nutrient chemistries. Although numerous authors present studies of individual catchment responses to storms, no studies exist of multiple catchment responses to the same rainfall event captured with in situ high-resolution nutrient monitoring at a national scale. This paper brings together findings from all three DTC research groups to compare the response of the catchments to a major storm event in April 2012. This was one of the first weather fronts to track across the country following a prolonged drought period affecting much of the UK through 2011–2012, marking an unusual meteorological transition when a rapid shift from drought to flood risk occurred. The effects of the weather front on discharge and water chemistry parameters, including nitrogen species (NO3-N and NH4-N) and phosphorus fractions (total P (TP) and total reactive P (TRP)), measured at a half-hourly time step are examined. When considered in the context of one hydrological year, flow and concentration duration curves reveal that t

The Global Ocean Data Assimilation Experiment (GODAE [http://www.godae.org]) has spanned a decade of rapid technological development. The ever-increasing volume and diversity of oceanographic data produced by in situ instruments, remote-sensing platforms, and computer simulations have driven the development of a number of innovative technologies that are essential for connecting scientists with the data that they need. This paper gives an overview of the technologies that have been developed and applied in the course of GODAE, which now provides users of oceanographic data with the capability to discover, evaluate, visualize, download, and analyze data from all over the world. The key to this capability is the ability to reduce the inherent complexity of oceanographic data by providing a consistent, harmonized view of the various data products. The challenges of data serving have been addressed over the last ten years through the cooperative skills and energies of many individuals.

Not Provided.