Search

PurposeAnterior cruciate ligament (ACL) rupture is increasingly common in adolescents. Time between ACL rupture and surgical reconstruction, surgical wait time, is related to concurrent meniscal tear incidence and possibly tear pattern. This study defines the relationship between meniscal tear characteristics and surgical wait time in adolescents with ACL rupture.MethodsOne-hundred and twenty-one consecutive adolescent (median age 16.1 years, range 9-19 years) ACL rupture patients undergoing primary ACL reconstruction were studied. All had documented surgical wait time, preoperative and 6-month post-operative outcome (Lysholm and pedi-IKDC) scores, and intraoperative meniscus tear characteristics. Meniscal tear severity was graded according to the Lawrence and Anderson system: non-surgical: grade 1; reparable: grade 2-3; irreparable: grade 4-5. Significant tears were defined as at least grade 2.ResultsAverage age at surgery was 16.1 years. 48.7 % had surgical wait time greater than 6 months. 42.5 % of menisci were torn. With surgical wait time 6 months, medial tear incidence increased (50 vs 21 %, p 6 months. Public insurance was a risk factor for longer surgical wait time and meniscus tear.

Pseudotumor-like periprosthetic tissue reactions around metal-on-metal (M-M) hip replacements can cause pain and lead to revision surgery. The cause of these reactions is not well understood but could be due to excessive wear, or metal hypersensitivity or an as-yet unknown cause. The tissue features may help distinguish reactions to high wear from those with suspected metal hypersensitivity.We therefore examined the synovial lining integrity, inflammatory cell infiltrates, tissue organization, necrosis and metal wear particles of pseudotumor-like tissues from M-M hips revised for suspected high wear related and suspected metal hypersensitivity causes.Tissue samples from 32 revised hip replacements with pseudotumor-like reactions were studied. A 10-point histological score was used to rank the degree of aseptic lymphocytic vasculitis-associated lesions (ALVAL) by examination of synovial lining integrity, inflammatory cell infiltrates, and tissue organization. Lymphocytes, macrophages, plasma cells, giant cells, necrosis and metal wear particles were semiquantitatively rated. Implant wear was measured with a coordinate measuring machine. The cases were divided into those suspected of having high wear and those suspected of having metal hypersensitivity based on clinical, radiographic and retrieval findings. The Mann-Whitney test was used to compare the histological features in these two groups.The tissues from patients revised for suspected high wear had a lower ALVAL score, fewer lymphocytes, but more macrophages and metal particles than those tissues from hips revised for pain and suspected metal hypersensitivity. The highest ALVAL scores occurred in patients who were revised for pain and suspected metal hypersensitivity. Component wear was lower in that group.Pseudotumor-like reactions can be caused by high wear, but may also occur around implants with low wear, likely because of a metal hypersensitivity reaction. Histologic features including synovial integrity, inflammatory cell infiltrates, tissue organization, and metal particles may help differentiate these causes.Painful hips with periprosthetic masses may be caused by high wear, but if this can be ruled out, metal hypersensitivity should be considered.

Purpose: Composite models have become commonplace for the assessment of fixation and stability of total joint replacements; however, there are no comparable models for the cervical spine to evaluate fixation. The goal of this study was to create the framework for a tunable non‐homogeneous model of cervical vertebral body by identifying the relationships between strength, in‐fill density, and lattice structure and creating a final architectural framework for specific strengths to be applied to the model. Methods: The range of material properties for cervical spine were identified from literature. Using additive manufacturing software, rectangular prints with three lattice structures, gyroid, triangle, zig‐zag, and a range of in‐fill densities were 3D‐printed. The compressive and shear strengths for all combinations were calculated in the axial and coronal planes. Eleven unique vertebral regions were selected to represent the distribution of density. Each bone density was converted to strength and subsequently correlated to the lattice structure and in‐fill density with the desired material properties. Finally, a complete cervical vertebra model was 3D‐printed to ensure sufficient print quality. Results: Materials testing identified a relationship between in‐fill densities and strength for all lattice structures. The axial compressive strength of the gyroid specimens ranged from 1.5 MPa at 10% infill to 31.3 MPa at 100% infill and the triangle structure ranged from 2.7 MPa at 10% infill to 58.4 MPa at 100% infill. Based on these results, a cervical vertebra model was created utilizing cervical cancellous strength values and the corresponding in‐fill density and lattice structure combination. This model was then printed with 11 different in‐fill densities ranging from 33% gyroid to 84% triangle to ensure successful integration of the non‐homogeneous in‐fill densities and lattice structures. Conclusions: The findings from this study introduced a framework for using additive manufacturing to create a tunable, customizable biomimetic model of a cervical vertebra. [ABSTRACT FROM AUTHOR]

Background and purpose - Hip resurfacing (HR) is a treatment option promoted for hip arthritis in young and active patients. However, adverse reactions to metal are a concern and the search for non-metallic bearing options proceeds. We present the first clinical study performed in patients using a newly developed hydrophilic polymer-on-polymer hip resurfacing device. Patients and methods - After performing extensive hip simulator tests, biocompatibility testing and animal tests (ISO 14242-1,3; 10993-3,4,5,10,11), approval was obtained from the IRB committee to enroll 15 patients in the first clinical study in humans using this experimental polymer-on-polymer hip resurfacing device. All surgeries were done by 2 experienced hip resurfacing surgeons. Clinical scores and standard radiographs as well as routine MRIs were obtained at regular intervals. Results - The surgical technique proved feasible with successful implantation of the new device using PMMA cement fixation on both sides without complications. Postoperative imaging revealed a well-positioned and well-fixed polymer resurfacing hip arthroplasty in all 4 initial cases. All 4 patients were free of pain and had good function for the first 2 months. However, in all 4 cases early cup loosening occurred between 8 and 11 weeks after surgery, necessitating immediate closure of the study. All 4 patients had a reoperation and were revised to a conventional THA. Retrieval analyses confirmed early cup loosening at the implant-cement interface in all 4 cases. The femoral components remained well attached to the cement. The periprosthetic tissues showed only small amounts of polymeric wear debris and there was only a very mild inflammatory reaction to this. Interpretation - Early cup loosening mandated a premature arrest of this study. After additional laboratory testing this failure mode was found to be the result of a small, yet measurable contraction in the cup size after exposing these implants to biological fluid divalent ion fluctuations in vivo. Currently used preclinical tests had failed to detect this failure mechanism. Modification of the polymer is essential to overcome these problems and before the potential of a polymer-on-polymer resurfacing arthroplasty may be further evaluated in patients. [ABSTRACT FROM AUTHOR]

The article offers information on spinal fusion related to the changes in acetabular orientation and reductions in pelvic mobility. It mentions that there is a relationship between acetabular tilt in the sagittal plane and the motion of the sacrum in patients with no spine or hip disorders. It focuses on standing-to-sitting alignment of the lumbar spine, pelvis, and femur.

The author discusses the study of Boutin and colleagues on the unexplored variables related to knuckle cracking such as swelling, joint laxity and weakness immediately before and after cracking. It mentions that the results of the study show that knuckle cracking does not have an adverse effects on grip strength and swelling. the author adds that the study need to be reinforced by a restrospective research.

The article focuses on a study related to aspects of wear and damage to the surfaces of a cervical disc replacement. Topics discussed include PEEK-on-ceramic bearings as a reasonable alternative to polyethylene-on- Cobalt-chrome (CoCr) or metal-on-metal bearing for cervical disc replacements, need for clinicians and regulatory agencies to work with independent researchers and academic institutions; and requirements framed by International Organization for Standardization and ASTM.

Objectives: Implant prominence after ulnar fracture fixation may be mitigated by the use of lower profile plates. The biomechanical strength and stability of 2.7-mm and 3.5-mm locking compression plates for fixation were compared., Methods: Two fracture conditions, transverse (N = 10) and oblique (N = 10), were evaluated in an in vitro study. Half of the specimens for each condition were fixed with 2.7-mm plates and the other half with 3.5-mm plates, all fixed with conventional dynamic compression mechanisms. Specimens were loaded under ±2 Nm of cyclic axial torsion, then under 10 Nm of cyclic cantilever bending, and bending to failure. Interfragmentary motion and strain were analyzed to determine construct stability as a function of fracture pattern and plate size., Results: Interfragmentary motion was significantly larger in all constructs fixed with 2.7-mm plates, compared with 3.5-mm plates ( P < 0.01). The 2.7-mm constructs with transverse fractures had the greatest motion, ranging between 5° and 10° under axial rotation and 5.0-6.0 mm under bending. Motions were the lowest for 3.5-mm constructs with oblique fractures, ranging between 3.2 and 4.2 mm under bending and 2°-3.5° for axial rotation. For oblique fractures, the bending moment at ultimate failure was 31.4 ± 3.6 Nm for the 2.7-mm constructs and 10.0 ± 1.9 Nm for 3.5-mm constructs ( P < 0.01). Similarly, for transverse fractures, the bending moment was 17.9 ± 4.0 Nm for the 2.7-mm constructs and 9.7 ± 1.3 Nm for the 3.5-mm constructs ( P < 0.01)., Conclusions: Although 3.5-mm plates were more effective at reducing fracture motion, they were consistently associated with refracture at the distal-most screw hole under load to failure. By contrast, 2.7-mm plates plastically deformed despite excessive loads, potentially avoiding a subsequent fracture., Level of Evidence: Level V., Competing Interests: The authors report no conflict of interest. The authors have no conflicts of interest to disclose., (Copyright © 2023 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the Orthopaedic Trauma Association.)