Search

Achieving photocatalytic organic transformation reactions by using a visible light induced semiconductor-based photocatalyst is promising as a green and sustainable approach. In the present study, Au/Pd bimetallic alloy loaded amine (APTES) functionalised LDH (Layered double hydroxide)–MCM-41 composite was prepared through an in situ co-precipitation followed by a co-reduction method. The structural phases, textural properties, optical behaviour, morphological aspects, chemical states and functional groups of the photocatalysts were thoroughly analysed by powder X-ray diffraction (PXRD), high-resolution transmission electron microscopy (HRTEM), ultraviolet-visible diffuse reflectance (UV-vis DRS), fourier-transform infrared (FTIR) and X-ray photoelectron (XPS) spectroscopies. Moreover, the formation of an alloying structure between Au and Pd was confirmed from PXRD, HRTEM and UV-vis absorption spectra. We investigated one-pot synthesis of imines through photoalkylation of benzyl alcohol with nitrobenzene over Au/Pd bimetal alloy loaded on amine functionalised LDH–MCM-41 composite and it demonstrated imine yield of around 3.1 times (68%) more than the parent LDH (22%). The alloy nanoparticless efficiently harvest light and possess higher photocatalytic activity with respect to single Pd and Au nanoparticles. Due to the alloying structure develops charge heterogeneity on the surface of alloyed nanoparticles and enhances the interaction between metal surface with substrate molecule which promotes the coupling between photo generated benzaldehyde with aniline to form imine. Characterisation such as photoluminescence (PL), time-resolved photoluminescence (TRPL), electrical impedance spectroscopy (EIS) and photocurrent density measurements further proved the superior photoactivity towards imine synthesis. These photocatalytic tandem reactions, therefore, have great potential as an effective pathway for the one-pot organic synthesis and transformation of organics in an environmentally friendly way.

Paper-based microfluidic devices are popular for their ability to automate multi-step assays for chemical or biological sensing at a low cost, but the design of paper microfluidic networks has largely relied on experimental trial and error. A few mathematical models of flow through paper microfluidic devices have been developed and have succeeded in explaining experimental flow behaviour. However, the reverse engineering problem of designing complex paper networks guided by appropriate mathematical models is largely unsolved. In this article, we demonstrate that a two-dimensional paper network (2DPN) designed to sequentially deliver three fluids to a test zone on the device can be computationally designed and experimentally implemented without trial and error. This was accomplished by three new developments in modelling flow through paper networks: i) coupling of the Richards equation of flow through porous media to the species transport equation, ii) modelling flow through assemblies of multiple paper materials (test membrane and wicking pad), and iii) incorporating limited-volume fluid sources. We demonstrate the application of this model in the optimal design of a paper-based signal-enhanced immunoassay for a malaria protein, PfHRP2. This work lays the foundation for the development of a computational design toolbox to aid in the design of paper microfluidic networks.

Since Andreas Manz first introduced the microchip technology for chemical applications back in the 1990s, the field of `microfluidics' has expanded widely and microfluidic tools have become ubiquitous in life sciences research. However, pumps and controllers associated with most current microfluidic chips continue to be bulky and costly. A new class of microfluidic devices in which flow channels are composed of multidimensional (2D or 3D) shapes of porous materials is becoming increasingly popular. The ability of porous materials to wick fluids obviates the need for pumps, making such devices portable, low-cost, and ideal for use in low-resource settings. Such devices are broadly referred to as ``paper microfluidic devices''. The ability to manipulate fluids in paper microfluidics has progressively increased over the past decade and such devices are currently being used to develop highly sensitive and multiplexed low-cost diagnostic/sensing devices. In this article, we review the area of paper microfluidics covering the basic fluid physics, methods of fabrication, flow control tools, applications in diagnostics/sensing, and applications in other emerging areas like tissue engineering and power storage. This review is targeted to a broad audience that does not have prior exposure to the field of paper-based microfluidics. Through this article, we wish to invite researchers from multiple backgrounds to contribute to further development in this new and exciting area of research.

A series of ternary Cu@CuO–g-C3N4/MCM-41 photocatalysts have been synthesized by varying the percentage of Cu using simple impregnation and co-condensation methods. The physico-chemical characterization of all the samples was determined using XRD, FTIR, UV-Vis DRS, PL, N2 ads–des studies, SEM and XPS HRTEM, EDAX, EIS and MS. The structural advantages of MCM-41, allow the uniform distribution of g-C3N4 and coexistence of Cu2+ along with Cu0 without using a reducing agent. The presence of g-C3N4 helps to shift the Fermi level of CuO towards more negative values due to accumulation of photogenerated electrons on the surface. It favours charge separation by creating a Schottky barrier at the junction. The 4 wt% Cu loaded over g-C3N4/MCM-41 exhibits a maximum 750 μmol 2 h−1 of H2 evolution under visible light irradiation with an apparent energy conversion efficiency of 24.8%. The enhancement in catalytic activity has been explained on the basis of synergism between g-C3N4 and Cu2+ and the SPR effect of Cu which also acts as a co-catalyst present on the surface of photocatalysts.

Paper-based microfluidic devices are rapidly becoming popular as a platform for developing point-of-care medical diagnostic tests. However, the design of these devices largely relies on trial and error, owing to a lack of proper understanding of fluid flow through porous membranes. Any porous material having pores of multiple sizes contains partially saturated regions, i.e., regions where less than 100% of the pores are filled with fluid. The capillary pressure and permeability of the material change as a function of the extent of saturation. Although methods to measure these relationships have been developed in other fields of study, these methods have not yet been adapted for paper for use by the larger community of analytical chemists. In the current work, we present a set of experimental methods that can be used to measure the relationships between capillary pressure, permeability, and saturation for any commercially available paper membrane. These experiments can be performed using commonly available lab instruments. We further demonstrate the use of the Richards equation in modeling imbibition into two-dimensional paper networks, thus adding new capability to the field. Predictions of spatiotemporal saturation from the model were in strong agreement with experimental measurements. To make these methods readily accessible to a wide community of chemists, biologists, and clinicians, we present the first report of a simple protocol to measure the flow rates considering the effect of partial saturation. Use of this protocol could drastically reduce the trial and error involved in designing paper-based microfluidic devices.

In recent years, metal/metal oxide functionalized mesoporous materials have received increasing attention in science and technology due to their fascinating properties, such as a large surface area, mesoscopic bulky shape, and interconnected porous structures enabling them to be one of the most promising materials for catalysis and photo catalysis. This review summarizes the recent developments in design, preparation and applications of transition metal/metal oxide promoted MCM-41 for production of hydrogen energy and removal of aqueous pollutants. After a brief introduction of these materials and synthetic strategies, their characterizations and applications in aqueous pollutant degradation by photocatalysis/photo-Fenton processes and H2 energy production by photocatalytic water splitting are summarized. Finally, the future perspectives directions for this promising field are also discussed.

Higher capture efficiencies with faster response times are important performance benchmarks for heterogeneous immunosensors which are utilized in recognitions of analytes for disease detection. As the capture involves transport of antigens from the bulk solution to the surface immobilized antibodies and the subsequent binding, the transport and reaction parameters play a critical role. While there are reports on the effect of individual process parameters (temperature, extent of mixing, pH) on the antigen/antibody interaction, we are not aware of any studies on the combined effect of these process parameters, and moreover, there are limited studies on the effect of these process parameters on the reaction and transport parameters. Knowledge of the effect of the process parameters on the transport and reaction parameters is necessary to understand their relative contributions to and the mechanism involved in the capture of the antigens. In this work, we have made an attempt to quantify the transport and reaction parameters and studied their dependencies on the process parameters. Experiments were conducted with three systems – BSA/anti-BSA, PSA/anti-PSA and CRP/anti-CRP, to quantify the captured antigen. The dependencies of the process parameters on the transport and reaction parameters were obtained from the experimental data using a diffusion–convection–electromigration–reaction model. Utilizing these dependency functions, the process parameters were modeled to find the optimal conditions for the highest capture efficiencies. Specifically, the influence of pH on maximizing the antigen capture and the underlying mechanism of the electrostatic interactions based on the surface charges and zeta potentials were elucidated.

Nowadays, inorganic–organic hybrid materials having pores in the mesoporous range are an intensively studied new category of demanding materials. By template synthesis, the coupling of inorganic and organic components gives pore sizes between 2 and 15 nm with very high surface area. The inorganic–organic hybrid materials were prepared in two ways: one was by co-condensation and the other by post-synthesis method. The inorganic part provides mechanical strength and the organic part shows functional activities. This review gives an overview of the preparation, properties, and potential applications of these materials in the areas of adsorption of pollutant gases like CO2 and heavy metals and in catalysis. Their activity is found to be very impressive in all these fields and it is hoped to be improved in the near future.

The current research paper deals with the study of palladium doped TiO2 based photocatalytic system to remove cyanide from coke oven wastewater. The photocatalytic activity was improved by employing hydroxyapatite nanoparticles, which serves to enhance the concentration of cyanide near the photoactive sites of TiO2 and also prevents its agglomeration. Further, to enhance the rate of photocatalytic degradation of cyanide under visible light irradiation an iron tetracarboxy phenyl porphyrin sensitizer (Fe-TCPP) was employed. The structural and morphological characterization of the synthesized catalysts were carried out by Fourier transformation infrared spectroscopy (FTIR), X-ray diffraction (XRD), photoluminescence (PL) emission spectra, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS) and ultraviolet diffuse reflectance spectroscopy (UV- DRS). The photocatalytic activity of the TiO2-Pd-HAP-Fe-TCPP- nanocomposite has been evaluated on degradation of cyanide under visible light irradiation using a photocatalytic reactor system. The results demonstrate the existence of synergistic effect between TiO2-Pd-HAP and Fe-TCPP sensitizer on removal of cyanide. Almost 90% of cyanide degradation was achieved at pH 11 within a short time span of 90 min, using the TiO2-Pd-HAP -Fe-TCPP nanocomposite. The photocatalytic degradation of cyanide by the nanocomposite follows pseudo-first order kinetics. The apparent rate constant (kapp) value of the TiO2-Pd-HAP-Fe-TCPP nanocomposite is estimated to be 11.6 and 4.3 time higher than that of bare TiO2 and TiO2-Pd-HAP respectively. Further, at this condition, >90% toxicity removal was achieved in the photocatalytic system even at a very high initial concentration of cyanide. Therefore, the Fe-TCPP-TiO2-Pd-HAP nanocomposite system can be considered as an alternative technique for removal of cyanide from coke oven wastewater.

The MCM-41 supported Cs2.5H0.5PW12O40 and K2.5H0.5PW12O40 salts were synthesized by incipient wetness impregnation method. The solids were characterized by N2 adsorption–desorption isotherms, FT-IR, XRD, and temperature programmed desorption, etc. This catalyst has been found to exhibit excellent activity for acetylation of phenolic compounds. The catalyst is stable and reusable giving 96% conversion with 100% selectivity towards acetate products.

The paper reports the synthesis, surface and textural characterization of copper and amine modified MCM-41 and its application for the single step amination of benzene to aniline at 70 °C. Varying the amount of Cu different Cu/amine modified MCM-41 samples was synthesized by co-condensation and impregnation method. The samples were characterized by nitrogen adsorption–desorption, X-ray powder diffraction, Fourier-transform infrared spectroscopy (FT-IR), 29Si magic-angle spinning (MAS) and 13C Nuclear Magnetic Resonance (NMR) and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. FT-IR and DRS results indicated that Cu and amino groups are incorporated into the Si–O framework and frame wall respectively. NMR showed higher degree of condensation of materials in framework position. Cu-amine-MCM-41 samples showed significant catalytic activity for single step amination of benzene in acetic acid–water medium under mild reaction conditions using hydroxylamine as aminating agent. The Cu-amine-MCM-41 (Si/Cu = 20) showed highest benzene conversion (72.2%) and 100% selectivity for aniline.

This paper reports preparation, characterization of amine modified mesoporous crystalline MCM-41 and its application in Knoevenagel condensation reaction. Amine modified MCM-41 was prepared by co-condensation and post-synthesis methods. The samples were characterized by X-ray powder diffraction, Fourier-transfer infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron micrograph (SEM), 29Si magic-angle spinning (MAS), nuclear magnetic resonance (NMR), diffuse reflectance spectra (DRS), nitrogen adsorption–desorption and CHN analysis. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. SEM study exhibits that the arrangement of particles for 12.8% amine modified MCM-41 is well ordered and spherical in nature. CHN analysis supports that complete hydrolysis of ethoxy groups take place in 12.8% amine modified sample. From the NMR study it is confirmed that the surface coverage is 40% in 12.8% amine modified sample. The base catalytic activity of hybrid MCM-41 materials such as amine (post-synthesis and co-condensation methods) and surfactant functionalized materials for condensation reaction between benzaldehyde and diethyl malonate in solvent free, room temperature synthesis of cinnamic acid was evaluated and correlated with the surface and textural properties. Sample containing 12.8 wt% amine loaded by co-condensation method showed highest malonic ester conversion (92%) and selectivity (98%) for cinnamic acid.

A series of copper catalysts supported on mesoporous molecular sieves MCM-41 with copper loading varying from 2 wt% to 10 wt% were synthesized by impregnation method using aqueous copper nitrate solution as the precursor. The samples were characterized by nitrogen adsorption–desorption, X-ray powder diffraction, FT-IR, UV-diffuse reflectance spectra and temperature programmed reduction. X-ray diffraction patterns indicate the presence of crystalline CuO phase above 4 wt% copper loading. TPR patterns at low temperatures reveal the presence of highly dispersed copper oxide on the surface of the support and the profiles at high temperatures indicates bulk copper oxide. The catalytic activity of the samples was evaluated towards benzene oxidation using H 2 O 2 as the oxidant in acetic acid solvent at room temperature. The effect of reaction parameters, i.e. time, temperature, catalyst amount, amount of H 2 O 2 , solvent and alkyl substitution on the substrate, were also investigated. Among the catalysts studied, 4 wt% copper loaded MCM-41 showed maximum conversion (21%) and selectivity (94%) towards phenol.

The mesoporous molecular sieve MCM-41 was synthesized by sol–gel method using tetraethyl orthosilicate (TEOS), cetyl trimethyl ammonium bromide (CTAB), aqueous NH3 and water. A series of sulfate modified MCM-41 was prepared by incipient wetness impregnation method using H2SO4 as sulfatising agent. The samples were characterized by BET surface area, X-ray diffraction, FT-IR and TG–DTA. The catalytic activity of the samples was evaluated for nitration of phenol with nitric acid in dichloro ethane (DCE) medium, at room temperature. The effect of reaction parameters, i.e. time, concentration of nitric acid and phenol/nitric acid ratio were also investigated. Modification with sulfate opened new opportunities to generate active Bronsted and Lewis acid sites in the stabilized nanostructure MCM-41. Among the catalysts screened, 4 wt.% sulfated MCM-41 showed maximum activity (93%), with 90% selectivity towards ortho-nitrophenol.

A series of Cs salt of phosphotungstic acid (Cs-PTA) supported on MCM-41 (Cs-PTA/MCM-41) was synthesized by a wet impregnation method and thoroughly characterized by using various analytical techniques, viz. X-ray diffraction, UV-Vis diffused reflectance spectroscopy (UV-Vis DRS), nitrogen adsorption desorption, scanning electron microscopy (SEM), Infrared spectra (FTIR), temperature programmed reduction (TPR), and temperature programmed desorption (TPD). The spectroscopic results revealed that Cs-PTA is highly dispersed on a MCM-41 surface. The 50 wt.% Cs-PTA supported on MCM-41 showed remarkable catalytic performance toward acylation of anisole reaction. The catalyst is regenerable by simple calcinations without appreciable loss in catalytic activity.

The Mobil Composition of Matter No. 41 (MCM-41) containing Cu and Al with Si/Al ratios varying from 100 to 10 and 1 to 6wt.% of Cu was synthesized under hydrothermal and impregnation conditions, respectively. The samples were characterized by nitrogen adsorption-desorption measurements, X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD), and (29)Si and (27)Al magic-angle spinning-nuclear magnetic resonance (MAS-NMR) spectra. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. TPR patterns show the two-step reduction of Cu species. TPD study shows that Cu-impregnated Al-MCM-41 samples are more acidic than Al-MCM-41. From the MAS-NMR it was confirmed that most of the Al atoms are present tetrahedrally within the framework and some are present octahedrally in extraframework position. Impregnation of Cu shifted Al to the extraframework position. The catalytic activity of the samples toward hydroxylation of phenol in aqueous medium was evaluated using H(2)O(2) as the oxidant at 80 degrees C. The effects of reaction parameters such as temperature, catalyst amount, amount of H(2)O(2), and solvent were also investigated. Sample containing 4wt.% copper-loaded Al-MCM-41-100 showed high phenol conversion (78%) with 68% catechol and 32% hydroquinone selectivity.