Search

Particle therapy (PT) used for cancer treatment can spare healthy tissue and reduce treatment toxicity. However, full exploitation of the dosimetric advantages of PT is not yet possible due to range uncertainties, warranting development of range-monitoring techniques. This study proposes a novel range-monitoring technique introducing the yet unexplored concept of simultaneous detection and imaging of fast neutrons and prompt-gamma rays produced in beam-tissue interactions. A quasi-monolithic organic detector array is proposed, and its feasibility for detecting range shifts in the context of proton therapy is explored through Monte Carlo simulations of realistic patient models and detector resolution effects. The results indicate that range shifts of [Formula: see text] can be detected at relatively low proton intensities ([Formula: see text] protons/spot) when spatial information obtained through imaging of both particle species are used simultaneously. This study lays the foundation for multi-particle detection and imaging systems in the context of range verification in PT. ispartof: SCIENTIFIC REPORTS vol:13 issue:1 ispartof: location:England status: published

Red mud (RM) contains large quantities of microscale particles < 1 micrometer and high concentrations of potentially toxic elements. In this research, we have used two types of RM of similar chemical properties but containing different quantities of micro-particles, to test whether their size plays a role in the uptake of chemical elements by earthworm Eisenia fetida. Earthworms were exposed for seven days to artificial soils (prepared in the laboratory following a protocol) amended with increasing quantities of RM. Mortality of 86% occurred when earthworms were exposed to amended soil containing 46% of particles below 1 µm. Surprisingly, tissue analyses have shown decreased concentrations of metals instead of the expected toxic effect. SEM analysis revealed that micro-particles strongly adhere to the earthworm epidermis putting them under the large stress. Micro-particles in RM clog their minute dermal pores of 90 nm to 735 nm in diameter, which size depends on whether the earthworm’s body is contracted or stretched. Strong adhesion of micro-particles to earthworms’ epidermis and blockage of their microsize pores prevented normal dermal respiration and absorption of chemical elements through their epithelium resulting in a decrease of most measured metals, especially essential elements potassium, calcium and iron, followed by the lethal outcomes.

Neutron inspection of sea-going cargo containers has been widely studied in the past 20 yr to non-intrusively detect terrorist threats, like explosives or Special Nuclear Materials (SNM), and illicit goods, like narcotics or smuggling materials. Fast 14 MeV neutrons are produced by a portable generator with the t(d, n)α fusion reaction, and tagged in both direction and time thanks to the alpha particle detection. This Associated Particle Technique (APT) allows focusing inspection on specific areas of interest in the containers, previously identified as containing suspicious items with X-ray radiographic scanners or radiation portal monitors. We describe the principle of APT for non-nuclear material identification, and for nuclear material detection, then we provide illustrations of the performances for 10 min inspections with significant quantities (kilograms) of explosives, illicit drugs, or SNM, in different cargo cover loads (e.g. metallic, organic, or ceramic matrices).

A proposal for an autonomous and flexible ship container inspection system is presented. This could be accomplished by the incorporation of an inspection system on various container transportation devices (straddle carriers, yard gentry cranes, automated guided vehicles, trailers). The configuration is terminal specific and it should be defined by the container terminal operator. This enables that no part of the port operational area is used for inspection. The inspection scenario includes container transfer from ship to transportation device with the inspection unit mounted on it. The inspection is performed during actual container movement to the container location. A neutron generator without associated alpha particle detection is used. This allows the use of higher neutron intensities ( $5\times {10^9} - {10^{10}} \ \text{n/s}$ in $4\pi $ ). The inspected container is stationary in the “inspection position” on the transportation device while the “inspection unit” moves along its side. The following analytical methods will be used simultaneously: neutron radiography, X-ray radiography, neutron activation analysis, (n, $\gamma $ ) and (n,n’ $\gamma $ ) reactions, neutron absorption. and scattering, X-ray backscattering. The neutron techniques will utilize “smart collimators” for neutrons and gamma rays, both emitted and detected. The inspected voxel is defined by the intersection of the neutron generator and the detectors solid angles. The container inspection protocol is based on identification of discrepancies between the cargo manifest, elemental “fingerprint” and radiography profiles. In addition, the information on container weight is obtained during the container transport and screening by measuring of density of material in the container.

The prospecting activities for finding new rare earth elements (REE) sources have increased greatly in recent years. One of the main discoveries was announced in 2011 by Japanese researchers who found large quantities of REE on the ocean seafloor at the sea depths greater than 4,000 m. The classic approach to investigate REE in deep sea sediments is to obtain sediment samples by drilling that is followed by laborious laboratory analysis. This is very expensive, time consuming and not appropriate for exploring vast areas. In order to efficiently explore the ocean floor for REE deposits, the further development of affordable sensors is needed. Here, we propose two nuclear techniques for exploring REE in surface deep sea sediments: i) Passive measurement of lutetium-176 radioactivity, appropriate if long-term in-situ measurements are possible, and ii) The use of the neutron sensor attached to a remotely operated vehicle for rapid in-situ measurement of gadolinium by thermal neutron-capture. Since concentrations of lutetium and gadolinium show strong linear correlation to the total REE concentrations in deep sea sediments, it is possible to deduce the total REE content by measuring Lu or Gd concentrations only.

A next generation system, as an upgrade of a robotic mobile system for anti-personnel landmine clearance, was considered. In contrast to the first generation system where the fast neutron activation method and the associated alpha particle imaging (API) was supposed to be used for finding the residual explosives and/or landmines, in the next generation system fast neutrons (FN) was considered to be used only for the confirmation of the explosive in the suspected object previously found by the ground penetrating radar (GPR), metal detector (MD) and infrared imaging (IR). Such system is expected to have the acceptable price and the optimal demining vehicle speed of 10 cm/s. In contrast to the previous system only one neutron generator (NG) is needed. In order to study the possibility of FN to confirm the presence of TNT explosive in the real environment the tests were made with the soil of different moisture contents. Comparative study was done by using the $7.62~hbox{; ; cm}; ; times 7.62~hbox{; ; cm}; ; $ BGO, $7.62~hbox{; ; cm}; ; times 7.62~hbox{; ; cm}; ; {; ; rm LaBr}; ; _{; ; 3}; ; :{; ; rm Ce}; ; $ and $7.62~hbox{; ; cm}; ; times 7.62~hbox{; ; cm}; ; $ NaI(Tl) gamma-ray detectors. Although nitrogen was easily detected in larger amount of TNT explosive, its signal was weak in detection of Anti-Personal (AP) mine like DLM2.4. The presences of soil additionally diminish the possibility of nitrogen detection even in the Anti-Tank mines (AT).

International audience; A system using a neutron sensor installed within a Remotely Operated Vehicle (ROV) for underwater inspection has been developed. The system can inspect objects for the presence of threat materials, such as explosives and chemical agents, by using alpha particle tagged neutrons from a sealed tube d + t neutron generator to produce characteristic gamma rays within the interrogated object. Here we show that the measured gamma spectra for commonly found ammunition charged with TNT explosives are dominated by C, O and Fe peaks enabling the underwater determination of explosives inside an ammunition shell.

In order to perform Quality Assurance/Quality Control (QA/QC) procedures for a system dedicated to the neutron interrogation of objects for the presence of threat materials one needs to perform measurements of reference materials (RM) i.e. simulants having the same (or similar) atomic ratios as real materials. It is well known that explosives, drugs, and various other benign materials, contain chemical elements such as hydrogen, oxygen, carbon and nitrogen in distinctly different quantities. For example, a high carbon-to-oxygen ratio (C/O) is characteristic of drugs. Explosives can be differentiated by measurement of both (C/O) and nitrogen-to-oxygen (N/O) ratios. The C/N ratio of the chemical warfare agents, coupled with the measurement of elements such as fluorine and phosphorus, clearly differentiate them from the conventional explosives. Here we present the RM preparation, calibration procedure and correlations attained between theoretical values and experimentally obtained results in laboratory conditions for C/O and N/C ratios of prepared hexogen (RDX), TNT, DLM2, TATP, cocaine, heroin, yperite, tetranitromethane, peroxide methylethylketone, nitromethane and ethyleneglycol dinitrate simulants. We have shown that analyses of the gamma ray spectra by using simple unfolding model developed for this purpose gave a nice agreement with the chemical formula of created simulants, thus the calibration quality was successfully tested.

It was demonstrated in the previous work that various threat materials could be detected inside the sea going cargo container by measuring the three variables, carbon and oxygen concentration and density of investigated material. Density was determined by measuring transmitted neutrons, which is not always practical in terms of setting up the instrument geometry. In order to enable more geometry flexibility, we have investigated the possibility of using the scattered neutrons in cargo material identification. For that purpose, the densities of different materials were measured depending on the position of neutron detectors and neutron generator with respect to the target position. One neutron detector was put above the target, one behind and one in front of the target, above the neutron generator. It was shown that all three positions of neutron detectors can be successfully used to measure the target density, but only if the detected neutrons are successfully discriminated from the gamma rays.

The aim of the research reported here is the development of a methodology for the measurement of small scale variations in chemical elements concentrations, in particular of carbon to oxygen ratio. Knowledge of the C/O ratio is of importance to many problems in various fields. Here we single out the application in obtaining important information about the oilfields. The most fundamental reservoir parameters-oil, gas and water content-are critical factors in determining how each oilfield should be developed. It is well established that carbon to oxygen ratio log yields accurate and repeatable data that can be used to identify and monitor reserves depletion. Recent improvements in neutron generator and gamma detector technologies resulted in small devices which allowed through-tubing measurements. Although the ratio of carbon and oxygen yields is a measure of the amount of oil around the tool it should be realized that a carbon signal can originate from several sources including the borehole, the cement behind the casing, the formation rock and the formation fluid. In order to evaluate these contributions individually we are proposing the modification of the neutron generator by insertion of segmented associated alpha particle detector. From the measurement of neutron time of flight spectra (alpha particle detector-start signal ; gamma ray detector-stop signal) it would be possible to determine the location of gamma-ray production voxel and in such a way to determine radial variations in chemical elements concentrations, in particular of C/O ratio.

Relatively recently, in the last 20 years, it was discovered that methane hydrate (MH) deposits are globally distributed in the permafrost and oceans. Before 1965 when first deposits were discovered in nature, it was believed that MH can occur only in laboratory conditions or in vast parts of the Universe. Presently it is presumed that this solid crystalline compounds in which CH4 molecules occupies the water ice lattices (nominal chemical formula of MH is C4H62O23) can serve as an energy source favorably to the all of the world remaining conventional hydrocarbon sources. The worldwide estimates of MH deposits range from 2x1014 m3 to 3.053x1018 cubic meters. This uncertainty partly results from our limitations in geological understanding of the MH deposits, which is due to the relatively bad quality of data obtained by presently available seismic and electromagnetic techniques. Moreover, MH deposits can become vulnerable to climate changes, which were already occurring in geological past whit tremendous consequences for the global life on Earth. Thus, further development of advanced techniques is needed to enhance our abilities to better characterize, quantify and monitor the MH deposits. In the work presented 14 MeV neutrons and associated alpha particle imaging (API) where used to quantify the amount of MH in the sample. Samples were prepared from sea sediment, quartz sand and MH simulant. MH simulant with chemical formula C4H46O23 was made from sucrose (25 % by mass) and water. MH quantity was measured by measuring the carbon content in the sample [1-8].

The reported loss of α-particles in the 14 MeV tagged neutron generators has been investigated using two neutron generators equipped with α-particle counters and two neutron detectors. One neutron detector was put right in the middle of the tagged neutron cone and another one was put outside the cone. By measuring the difference between double (neutron–neutron) and triple (α-neutron-neutron) coincidences it is possible to deduce the α-particle loss since the number of triple coincidences should be equal to the number of double coincidences. In all measurements performed a deficit of triple with respect to double coincidences has been observed. This deficit was smallest for the threshold of α-particle Constant Fraction Discriminator (αCFD) being 0 and maximum allowed voltage of α-particle detector being −1.7 kV. The smallest measured deficit value was equal to 13±1%. From the observed results it was concluded that the deficit was due to a number of non-detected α-particles that loose sufficient quantity of energy while traveling to the detector because of collisions with particles present in the neutron tube and/or in the tritium target. These α-particles will not be detected as they fall under the threshold of αCFD discriminator. Magnetic fields present in the system worsen the situation since they are forcing α-particles to travel larger distances because of toroidal movement and undergoing additional collisions. Tagged neutron technique has many kind of applications and it is particularly important for high accuracy nuclear cross-sections measurements when α-particles losses must be carefully assessed.

In order to demonstrate the possibility of identifying the material within ship’s underwater hull, sunken ships, or other objects on the sea fl oor, tests with a 14 MeV sealed tube neutron generator incorporated inside a small submarine were performed in the test basin fi lled with sea water. The results obtained for inspection of diesel fuel and explosive presence behind single and double hull structures are presented.

The illicit trafficking of explosive materials in cargo containers has become, in recent years, a serious problem. Currently used X-ray or γ -ray based systems provide only limited information about the elemental composition of the inspected cargo items. During the last years, a new neutron interrogation technique, named TNIS (Tagged Neutron Inspection System), has been developed, which should permit to determine the chemical composition of the suspect item by coincidence measurements between alpha particles and photons produced. A prototype of such a system for container inspection has been built, at the Institute Ruder Boskovic (IRB) in Zagreb, Croatia, for the European Union 6FP EURITRACK project. We present the results of a detailed simulation of the IRB prototype performed with the MCNP Monte Carlo program and a comparison with beam attenuation calculations performed with GEANT3/MICAP. Detector signals, rates and signal over background ratios have been calculated for 100 kg of TNT explosive located inside a cargo container filled with a metallic matrix of density 0.2 g/cm3. The case of an organic filling material is discussed too.