Search

Granular substrates ranging from silt to gravel cover much of the Earth's land area, providing an important habitat for fossorial animals. Many of these animals use their heads to penetrate the substrate. Although there is considerable variation in head shape, how head shape affects fossorial locomotor performance in different granular substrates is poorly understood. Here, head shape variation for 152 species of fossorial lizards was quantified for head diameter, slope and pointiness of the snout. The force needed to penetrate different substrates was measured using 28 physical models spanning this evolved variation. Ten substrates were considered, ranging in particle size from 0.025 to 4 mm in diameter and consisting of spherical or angular particles. Head shape evolved in a weakly correlated manner, with snouts that were gently sloped being blunter. There were also significant clade differences in head shape among fossorial lizards. Experiments with physical models showed that as head diameter increased, absolute penetration force increased but force normalized by cross-sectional area decreased. Penetration force decreased for snouts that tapered more gradually and were pointier. Larger and angular particles required higher penetration forces, although intermediate size spherical particles, consistent with coarse sand, required the lowest force. Particle size and head diameter effect were largest, indicating that fossorial burrowers should evolve narrow heads and bodies, and select relatively fine particles. However, variation in evolved head shapes and recorded penetration forces suggests that kinematics of fossorial movement are likely an important factor in explaining evolved diversity.

Namakanui is an instrument containing three inserts in an ALMA type Dewar. The three inserts are Alaihi, Uu and Aweoweo operating around 86, 230 and 345GHz. The receiver is being commissioned on the JCMT. It will be used for both Single dish and VLBI observations. We will present commissioning results and the system., 19 pages, 16 figures, Proceedings of SPIE

[Abridged] Filaments and hubs have received special attention recently thanks to studies showing their role in star formation. While the column density and velocity structures of both filaments and hubs have been studied, their magnetic fields (B-field) are not yet characterized. We aim to understand the role of the B-field in the dynamical evolution of the NGC 6334 hub-filament network. We present new observations of the dust polarized emission at 850$\mu$m towards NGC 6334 obtained with the JCMT/POL-2. We study the distribution and dispersion of the polarized intensity ($PI$), the polarization fraction ($PF$), and the B-field angle ($\theta_{B}$). We derive the power spectrum of the intensity and $\theta_{B}$ along the ridge crest. Our analyses show a complex B-field structure when observed over the whole region ($\sim10$ pc), however, at smaller scales ($\sim1$ pc), $\theta_{B}$ varies coherently along the filaments. The observed power spectrum of $\theta_{B}$ can be well represented with a power law function with a slope $-1.33\pm0.23$, which is $\sim20\%$ shallower than that of $I$. This result is compatible with the properties of simulated filaments and may indicate the processes at play in the formation of filaments. $\theta_{B}$ rotates from being mostly perpendicular to the filament crests to mostly parallel as they merge with the hubs. This variation of $\theta_{B}$ may be tracing local velocity flows of matter in-falling onto the hubs. Our analysis suggests a variation of the energy balance along the crests of these filaments, from magnetically critical/supercritical at their far ends to magnetically subcritical near the hubs. We detect an increase of $PF$ towards the high-column density star cluster-forming hubs that may result from the increase of grain alignment efficiency due to stellar radiation from the newborn stars., Comment: Accepted for publication in Astronomy & Astrophysics

We present early results from the JCMT (James Clerk Maxwell Telescope) Plane Survey (JPS), which has surveyed the northern inner Galactic plane between longitudes ℓ = 7° and ℓ = 63° in the 850-μm continuum with SCUBA-2 (Submm Common-User Bolometer Array 2), as part of the JCMT Legacy Survey programme. Data from the ℓ = 30° survey region, which contains the massive-star-forming regions W43 and G29.96, are analysed after approximately 40 per cent of the observations had been completed. The pixel-to-pixel noise is found to be 19 mJy beam−1 after a smooth over the beam area, and the projected equivalent noise levels in the final survey are expected to be around 10 mJy beam−1. An initial extraction of compact sources was performed using the FELLWALKER method, resulting in the detection of 1029 sources above a 5σ surface-brightness threshold. The completeness limits in these data are estimated to be around 0.2 Jy beam−1 (peak flux density) and 0.8 Jy (integrated flux density) and are therefore probably already dominated by source confusion in this relatively crowded section of the survey. The flux densities of extracted compact sources are consistent with those of matching detections in the shallower APEX (Atacama Pathfinder Experiment) Telescope Large Area Survey of the Galaxy (ATLASGAL) survey. We analyse the virial and evolutionary state of the detected clumps in the W43 star-forming complex and find that they appear younger than the Galactic-plane average.

We present 850 and 450 micron observations of the dense regions within the Auriga-California molecular cloud using SCUBA-2 as part of the JCMT Gould Belt Legacy Survey to identify candidate protostellar objects, measure the masses of their circumstellar material (disk and envelope), and compare the star formation to that in the Orion A molecular cloud. We identify 59 candidate protostars based on the presence of compact submillimeter emission, complementing these observations with existing Herschel/SPIRE maps. Of our candidate protostars, 24 are associated with young stellar objects (YSOs) in the Spitzer and Herschel/PACS catalogs of 166 and 60 YSOs, respectively (177 unique), confirming their protostellar nature. The remaining 35 candidate protostars are in regions, particularly around LkHalpha 101, where the background cloud emission is too bright to verify or rule out the presence of the compact 70 micron emission that is expected for a protostellar source. We keep these candidate protostars in our sample but note that they may indeed be prestellar in nature. Our observations are sensitive to the high end of the mass distribution in Auriga-Cal. We find that the disparity between the richness of infrared star forming objects in Orion A and the sparsity in Auriga-Cal extends to the submillimeter, suggesting that the relative star formation rates have not varied over the Class II lifetime and that Auriga-Cal will maintain a lower star formation efficiency., Comment: 39 pages (54 including the Appendix), 9 figures, 3 tables, in press in ApJ

This paper presents observations of the Lupus I molecular cloud at 450 and 850 μm with\ud Submillimetre Common User Bolometer Array (SCUBA-2) as part of the James Clerk Maxwell\ud Telescope Gould Belt Survey (JCMT GBS). Nine compact sources, assumed to be the discs of\ud young stellar objects (YSOs), 12 extended protostellar, pre-stellar and starless cores, and one\ud isolated, low-luminosity protostar, are detected in the region. Spectral energy distributions,\ud including submillimetre fluxes, are produced for 15 YSOs, and each is fitted with the models\ud of Robitaille et al. The proportion of Class 0/I protostars is higher than that seen in other\ud Gould Belt regions such as Ophiuchus and Serpens. Circumstellar disc masses are calculated\ud for more evolved sources, while protostellar envelope masses are calculated for protostars.\ud Up to four very low luminosity objects are found; a large fraction when compared to other\ud Spitzer c2d regions. One YSO has a disc mass greater than the minimum mass solar nebula.\ud 12 starless/protostellar cores are detected by SCUBA-2 and their masses are calculated. The\ud stability of these cores is examined using both the thermal Jeans mass and a turbulent virial\ud mass when possible. Two cores in Lupus I are super-Jeans and contain no known YSOs. One\ud of these cores has a virial parameter of 1.1 ± 0.4, and could therefore be pre-stellar. The high\ud ratio of Class 0/I to Class III YSOs (1:1), and the presence of a pre-stellar core candidate,\ud provides support for the hypothesis that a shock recently triggered star formation in Lupus I.

We present observations of the Cepheus Flare obtained as part of the James Clerk Maxwell Telescope (JCMT) Gould Belt Legacy Survey (GBLS) with the SCUBA-2 instrument. We produce a catalogue of sources found by SCUBA-2, and separate these into starless cores and protostars. We determine masses and densities for each of our sources, using source temperatures determined by the Herschel Gould Belt Survey. We compare the properties of starless cores in four different molecular clouds: L1147/58, L1172/74, L1251 and L1228. We find that the core mass functions for each region typically show shallower-than-Salpeter behaviour. We find that L1147/58 and L1228 have a high ratio of starless cores to Class II protostars, while L1251 and L1174 have a low ratio, consistent with the latter regions being more active sites of current star formation, while the former are forming stars less actively. We determine that if modelled as thermally supported Bonnor–Ebert spheres, most of our cores have stable configurations accessible to them. We estimate the external pressures on our cores using archival 13CO velocity dispersion measurements and find that our cores are typically pressure confined, rather than gravitationally bound. We perform a virial analysis on our cores, and find that they typically cannot be supported against collapse by internal thermal energy alone, due primarily to the measured external pressures. This suggests that the dominant mode of internal support in starless cores in the Cepheus Flare is either non-thermal motions or internal magnetic fields., Monthly Notices of the Royal Astronomical Society, 464 (4), ISSN:0035-8711, ISSN:1365-2966, ISSN:1365-8711

We present the first data release of the James Clerk Maxwell Telescope (JCMT) Plane Survey (JPS), the JPS Public Release 1 (JPSPR1). JPS is an 850-um continuum survey of six fields in the northern inner Galactic Plane in a longitude range of l=7-63, made with the Sub-millimetre Common-User Bolometer Array 2 (SCUBA-2). This first data release consists of emission maps of the six JPS regions with an average pixel-to-pixel noise of 7.19 mJy beam^-1, when smoothed over the beam, and a compact-source catalogue containing 7,813 sources. The 95 per cent completeness limits of the catalogue are estimated at 0.04 Jy beam^-1 and 0.3 Jy for the peak and integrated flux densities, respectively. The emission contained in the compact-source catalogue is 42 +- 5 per cent of the total and, apart from the large-scale (greater than 8') emission, there is excellent correspondence with features in the 500-um Herschel maps. We find that, with two-dimensional matching, 98 +- 2 per cent of sources within the fields centred at l=20, 30, 40 and 50 are associated with molecular clouds, with 91 +- 3 per cent of the l=30 and 40 sources associated with dense molecular clumps. Matching the JPS catalogue to Herschel 70-um sources, we find that 38 +- 1 per cent of sources show evidence of ongoing star formation. The images and catalogue will be a valuable resource for studies of star formation in the Galaxy and the role of environment and spiral arms in the star formation process., Comment: 22 pages, 18 figures, 4 tables. Full version of Table 3 available from http://www.canfar.phys.uvic.ca/vosui/#/JPSPR1 Accepted for publication in Monthly Notices of the Royal Astronomical Society

This paper describes a new Heterodyne Array Receiver Programme (HARP) and Auto-Correlation Spectral Imaging System (ACSIS) that have recently been installed and commissioned on the James Clerk Maxwell Telescope (JCMT). The 16-element focal-plane array receiver, operating in the submillimetre from 325 to 375 GHz, offers high (three-dimensional) mapping speeds, along with significant improvements over single-detector counterparts in calibration and image quality. Receiver temperatures are $\sim$120 K across the whole band and system temperatures of $\sim$300K are reached routinely under good weather conditions. The system includes a single-sideband filter so these are SSB figures. Used in conjunction with ACSIS, the system can produce large-scale maps rapidly, in one or more frequency settings, at high spatial and spectral resolution. Fully-sampled maps of size 1 square degree can be observed in under 1 hour. The scientific need for array receivers arises from the requirement for programmes to study samples of objects of statistically significant size, in large-scale unbiased surveys of galactic and extra-galactic regions. Along with morphological information, the new spectral imaging system can be used to study the physical and chemical properties of regions of interest. Its three-dimensional imaging capabilities are critical for research into turbulence and dynamics. In addition, HARP/ACSIS will provide highly complementary science programmes to wide-field continuum studies, and produce the essential preparatory work for submillimetre interferometers such as the SMA and ALMA., Comment: MNRAS Accepted 2009 July 2. 18 pages, 25 figures and 6 tables

The dust emissivity spectral index, $\beta$, is a critical parameter for deriving the mass and temperature of star-forming structures, and consequently their gravitational stability. The $\beta$ value is dependent on various dust grain properties, such as size, porosity, and surface composition, and is expected to vary as dust grains evolve. Here we present $\beta$, dust temperature, and optical depth maps of the star-forming clumps in the Perseus Molecular Cloud determined from fitting SEDs to combined Herschel and JCMT observations in the 160 $\mu$m, 250 $\mu$m, 350 $\mu$m, 500 $\mu$m, and 850 $\mu$m bands. Most of the derived $\beta$, and dust temperature values fall within the ranges of 1.0 - 2.7 and 8 - 20 K, respectively. In Perseus, we find the $\beta$ distribution differs significantly from clump to clump, indicative of grain growth. Furthermore, we also see significant, localized $\beta$ variations within individual clumps and find low $\beta$ regions correlate with local temperature peaks, hinting at the possible origins of low $\beta$ grains. Throughout Perseus, we also see indications of heating from B stars and embedded protostars, as well evidence of outflows shaping the local landscape., Comment: Accepted to ApJ, 15 figures, 3 tables

We present the JCMT Gould Belt Survey's first look results of the southern extent of the Orion A Molecular Cloud ($\delta \leq -5\mathrm{:}31\mathrm{:}27.5$). Employing a two-step structure identification process, we construct individual catalogues for large-scale regions of significant emission labelled as islands and smaller-scale subregions called fragments using the 850 $\mu$m continuum maps obtained using SCUBA-2. We calculate object masses, sizes, column densities, and concentrations. We discuss fragmentation in terms of a Jeans instability analysis and highlight interesting structures as candidates for follow-up studies. Furthermore, we associate the detected emission with young stellar objects (YSOs) identified by Spitzer and Herschel. We find that although the population of active star-forming regions contains a wide variety of sizes and morphologies, there is a strong positive correlation between the concentration of an emission region and its calculated Jeans instability. There are, however, a number of highly unstable subregions in dense areas of the map that show no evidence of star formation. We find that only $\sim$72\% of the YSOs defined as Class 0+I and flat-spectrum protostars coincide with dense 850 $\mu$m emission structures (column densities $>3.7\times10^{21}\mathrm{\:cm}^{-2}$). The remaining 28\% of these objects, which are expected to be embedded in dust and gas, may be misclassified. Finally, we suggest that there is an evolution in the velocity dispersion of young stellar objects such that sources which are more evolved are associated with higher velocities., Comment: 31 Pages, 19 Figures, Accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS)

We present SCUBA-2 450{\mu}m and 850{\mu}m observations of the W40 complex in the Serpens-Aquila region as part of the James Clerk Maxwell Telescope (JCMT) Gould Belt Survey (GBS) of nearby star-forming regions. We investigate radiative heating by constructing temperature maps from the ratio of SCUBA-2 fluxes using a fixed dust opacity spectral index, {\beta} = 1.8, and a beam convolution kernel to achieve a common 14.8" resolution. We identify 82 clumps ranging between 10 and 36K with a mean temperature of 20{\pm}3K. Clump temperature is strongly correlated with proximity to the external OB association and there is no evidence that the embedded protostars significantly heat the dust. We identify 31 clumps that have cores with densities greater than 105cm{^{-3}}. Thirteen of these cores contain embedded Class 0/I protostars. Many cores are associated with bright-rimmed clouds seen in Herschel 70 {\mu}m images. From JCMT HARP observations of the 12CO 3-2 line, we find contamination of the 850{\mu}m band of up to 20 per cent. We investigate the free-free contribution to SCUBA-2 bands from large-scale and ultracompact H ii regions using archival VLA data and find the contribution is limited to individual stars, accounting for 9 per cent of flux per beam at 450 {\mu}m or 12 per cent at 850 {\mu}m in these cases. We conclude that radiative heating has potentially influenced the formation of stars in the Dust Arc sub-region, favouring Jeans stable clouds in the warm east and fragmentation in the cool west., Comment: 27 pages, 25 figures, 7 tables, 3 online catalogues

The Flexible Image Transport System (FITS) standard has been a great boon to astronomy, allowing observatories, scientists and the public to exchange astronomical information easily. The FITS standard, however, is showing its age. Developed in the late 1970s, the FITS authors made a number of implementation choices that, while common at the time, are now seen to limit its utility with modern data. The authors of the FITS standard could not anticipate the challenges which we are facing today in astronomical computing. Difficulties we now face include, but are not limited to, addressing the need to handle an expanded range of specialized data product types (data models), being more conducive to the networked exchange and storage of data, handling very large datasets, and capturing significantly more complex metadata and data relationships. There are members of the community today who find some or all of these limitations unworkable, and have decided to move ahead with storing data in other formats. If this fragmentation continues, we risk abandoning the advantages of broad interoperability, and ready archivability, that the FITS format provides for astronomy. In this paper we detail some selected important problems which exist within the FITS standard today. These problems may provide insight into deeper underlying issues which reside in the format and we provide a discussion of some lessons learned. It is not our intention here to prescribe specific remedies to these issues; rather, it is to call attention of the FITS and greater astronomical computing communities to these problems in the hope that it will spur action to address them. (C) 2015 Elsevier B.V. All rights reserved.

Monthly Notices of the Royal Astronomical Society, 450 (1), ISSN:0035-8711, ISSN:1365-2966, ISSN:1365-8711

We employ SCUBA-2 (Submillimetre Common-User Bolometer Array 2) observations of the Orion A North molecular cloud to derive column density and temperature maps. We apply a novel, Hessian-based structural identification algorithm for detection of prestellar cores to these data, allowing for automated generation of the prestellar mass function. The resulting mass function is observed to peak at $1.39^{+0.18}_{{-}0.19} M_{\odot}$, indicating a star-forming efficiency lower limit of ∼14 per cent when compared with the Orion nebula Cluster initial mass function (IMF) peak. Additionally, the prestellar mass function is observed to decay with a high-mass powerlaw exponent $\alpha = 2.53^{+0.16}_{{-}0.14}$, indicating approximate functional similarity with the Salpeter IMF ($\alpha = 2.35$). This result, when combined with the results of previous investigations suggests a regional dependence of the star-forming efficiency.

A polarimeter has been built for use with the Submillimetre Common-User Bolometer Array (SCUBA), on the James Clerk Maxwell Telescope (JCMT) in Hawaii. SCUBA is the first of a new generation of highly sensitive submillimetre cameras, and the UK/Japan Polarimeter adds a polarimetric imaging/photometry capability in the wavelength range 350 to 2000 microns. Early science results range from measuring the synchrotron polarization of the black hole candidate Sgr A* to mapping magnetic fields inferred from polarized dust emission in Galactic star-forming clouds. We describe the instrument design, performance, observing techniques and data reduction processes, along with an assessment of the current and future scientific capability., Comment: 10 pages, 7 figures, to appear in Monthly Notices of the Royal Astronomical Society

We present 850$\mu$m and 450$\mu$m data from the JCMT Gould Belt Survey obtained with SCUBA-2 and characterise the dust attributes of Class I, Class II and Class III disk sources in L1495. We detect 23% of the sample at both wavelengths, with the detection rate decreasing through the Classes from I--III. The median disk mask is 1.6$\times 10^{-3}$M$_{\odot}$, and only 7% of Class II sources have disk masses larger than 20 Jupiter masses. We detect a higher proportion of disks towards sources with stellar hosts of spectral type K than spectral type M. Class II disks with single stellar hosts of spectral type K have higher masses than those of spectral type M, supporting the hypothesis that higher mass stars have more massive disks. Variations in disk masses calculated at the two wavelengths suggests there may be differences in dust opacity and/or dust temperature between disks with hosts of spectral types K to those with spectral type M., Comment: 11 pages, 10 figures plus Appendix. MNRAS accepted

We present SCUBA-2 450micron and 850micron observations of the Serpens MWC 297 region, part of the JCMT Gould Belt Survey of nearby star-forming regions. Simulations suggest that radiative feedback influences the star-formation process and we investigate observational evidence for this by constructing temperature maps. Maps are derived from the ratio of SCUBA-2 fluxes and a two component model of the JCMT beam for a fixed dust opacity spectral index of beta = 1.8. Within 40 of the B1.5Ve Herbig star MWC 297, the submillimetre fluxes are contaminated by free-free emission with a spectral index of 1.03+-0.02, consistent with an ultra-compact HII region and polar winds/jets. Contamination accounts for 73+-5 per cent and 82+-4 per cent of peak flux at 450micron and 850micron respectively. The residual thermal disk of the star is almost undetectable at these wavelengths. Young Stellar Objects are confirmed where SCUBA-2 850micron clumps identified by the fellwalker algorithm coincide with Spitzer Gould Belt Survey detections. We identify 23 objects and use Tbol to classify nine YSOs with masses 0.09 to 5.1 Msun. We find two Class 0, one Class 0/I, three Class I and three Class II sources. The mean temperature is 15+-2K for the nine YSOs and 32+-4K for the 14 starless clumps. We observe a starless clump with an abnormally high mean temperature of 46+-2K and conclude that it is radiatively heated by the star MWC 297. Jeans stability provides evidence that radiative heating by the star MWC 297 may be suppressing clump collapse., Comment: 24 pages, 13 figures, 7 tables

The importance of O-acetyl groups to the immunogenicity of Neisseria meningitidis serogroup A polysaccharide (PS) was examined in studies using human sera and mouse immunization. In 17 of 18 postimmunization human sera, inhibition enzyme-linked immunosorbent assay indicated that the majority of antibodies binding to serogroup A PS were specific for epitopes involving O-acetyl groups. Studies with mice also showed an essential role for O-acetyl groups, where serum bactericidal titers following immunization with de-O-acetylated (de-O-Ac) conjugate vaccine were at least 32-fold lower than those following immunization with O-Ac PS-conjugate vaccine and 4-fold lower than those following immunization with native capsular PS. Inhibition studies using native and de-O-Ac PS confirmed the specificity of murine antibodies to native PS. The dramatic reduction in immunogenicity associated with removal of O-acetyl groups indicates that O acetylation is essential to the immunogenic epitopes of serogroup A PS. Since levels of bactericidal antibodies are correlated with protection against disease, O-acetyl groups appear to be important in protection.

SCUBA-2 is an innovative 10000 pixel bolometer camera operating at submillimetre wavelengths on the James Clerk Maxwell Telescope (JCMT). The camera has the capability to carry out wide-field surveys to unprecedented depths, addressing key questions relating to the origins of galaxies, stars and planets. With two imaging arrays working simultaneously in the atmospheric windows at 450 and 850 microns, the vast increase in pixel count means that SCUBA-2 maps the sky 100-150 times faster than the previous SCUBA instrument. In this paper we present an overview of the instrument, discuss the physical characteristics of the superconducting detector arrays, outline the observing modes and data acquisition, and present the early performance figures on the telescope. We also showcase the capabilities of the instrument via some early examples of the science SCUBA-2 has already undertaken. In February 2012, SCUBA-2 began a series of unique legacy surveys for the JCMT community. These surveys will take 2.5 years and the results are already providing complementary data to the shorter wavelength, shallower, larger-area surveys from Herschel. The SCUBA-2 surveys will also provide a wealth of information for further study with new facilities such as ALMA, and future telescopes such as CCAT and SPICA., 23 pages, 20 figures, 3 tables. Accepted by MNRAS

SCUBA-2 is a 10000-bolometer submillimetre camera on the James Clerk Maxwell Telescope (JCMT). The instrument commissioning was completed in September 2011, and full science operations began in October 2011. To harness the full potential of this powerful new astronomical tool, the instrument calibration must be accurate and well understood. To this end, the algorithms for calculating the line-of-sight opacity have been improved, and the derived atmospheric extinction relationships at both wavebands of the SCUBA-2 instrument are presented. The results from over 500 primary and secondary calibrator observations have allowed accurate determination of the flux conversion factors (FCF) for the 850 and 450 micron arrays. Descriptions of the instrument beam-shape and photometry methods are presented. The calibration factors are well determined, with relative calibration accuracy better than 5 per cent at 850 microns and 10 per cent at 450 microns, reflecting the success of the derived opacity relations as well as the stability of the performance of the instrument over several months. The sample-size of the calibration observations and accurate FCFs have allowed the determination of the 850 and 450 micron fluxes of several well-known submillimetre sources, and these results are compared with previous measurements from SCUBA., 12 pages, 18 figures, 4 tables, Accepted by MNRAS

We present observations of 1200 neutral hydrogen spectra measured over a 2°×6° field, centred at RA 10 h 07 m 00 s , Dec. 53°, which is currently the subject of a ROSAT deep field survey. The column densities measured range from 0.4 to 1.3×10 20 cm −2 , and significant changes in velocity structure are seen. The northern part of the field (i.e.> 52°) shows systematically lower column densities than does the southern part

An example of the mapping of IRAS Calibrated Reconstructed Detector Data using a maximum entropy method is presented. The triple source W49A was chosen because of the availability of previous far-infrared data for comparison. The method is shown to enhance considerably the resolution of images made from IRAS data, and to reproduce morphology consistent with previous KAO data, as well as consistent flux densities for W49N, the only source for which previous detailed photometry exists

Images of the ionized knots and spokes within the helical structure of the Helix nebula have been obtained with subarcsecond resolution in the light of the Hα + [N II], [O III] 5007 A and [O II] 3727 A emission lines. The [O III] image reveals the knots and their tails in absorption. The globules and tails must be dusty and are seen against the diffuse, central [O III]-emitting volume of the Helix nebula. The curved heads of these neutral knots are radiatively ionized by the light of the cetnral star to produce spatially resolved, bow-shaped Hα + [N II] and [O II]-emitting structures displaced (measured for the most prominent globule) by 1.65 arscec (3.1 × 10 15 cm) towards the central star from the peak of the absorption

We present a first look at the SCUBA-2 observations of three sub-regions of the Orion B molecular cloud: LDN 1622, NGC 2023/2024, and NGC 2068/2071, from the JCMT Gould Belt Legacy Survey. We identify 29, 564, and 322 dense cores in L1622, NGC 2023/2024, and NGC 2068/2071 respectively, using the SCUBA-2 850 micron map, and present their basic properties, including their peak fluxes, total fluxes, and sizes, and an estimate of the corresponding 450 micron peak fluxes and total fluxes, using the FellWalker source extraction algorithm. Assuming a constant temperature of 20 K, the starless dense cores have a mass function similar to that found in previous dense core analyses, with a Salpeter-like slope at the high-mass end. The majority of cores appear stable to gravitational collapse when considering only thermal pressure; indeed, most of the cores which have masses above the thermal Jeans mass are already associated with at least one protostar. At higher cloud column densities, above 1-2 x 10^23 cm^-2, most of the mass is found within dense cores, while at lower cloud column densities, below 1 x 10^23 cm^-2, this fraction drops to 10% or lower. Overall, the fraction of dense cores associated with a protostar is quite small (, Comment: Accepted for publication in ApJ; 28 pages, 19 figures. Data associated with the paper, including the full table 4, can be found at https://doi.org/10.11570/16.0003

We present a comparison of SCUBA-2 850-$\mu$m and Herschel 70--500-$\mu$m observations of the L1495 filament in the Taurus Molecular Cloud with the goal of characterising the SCUBA-2 Gould Belt Survey (GBS) data set. We identify and characterise starless cores in three data sets: SCUBA-2 850-$\mu$m, Herschel 250-$\mu$m, and Herschel 250-$\mu$m spatially filtered to mimic the SCUBA-2 data. SCUBA-2 detects only the highest-surface-brightness sources, principally detecting protostellar sources and starless cores embedded in filaments, while Herschel is sensitive to most of the cloud structure, including extended low-surface-brightness emission. Herschel detects considerably more sources than SCUBA-2 even after spatial filtering. We investigate which properties of a starless core detected by Herschel determine its detectability by SCUBA-2, and find that they are the core's temperature and column density (for given dust properties). For similar-temperature cores, such as those seen in L1495, the surface brightnesses of the cores are determined by their column densities, with the highest-column-density cores being detected by SCUBA-2. For roughly spherical geometries, column density corresponds to volume density, and so SCUBA-2 selects the densest cores from a population at a given temperature. This selection effect, which we quantify as a function of distance, makes SCUBA-2 ideal for identifying those cores in Herschel catalogues that are closest to forming stars. Our results can now be used by anyone wishing to use the SCUBA-2 GBS data set., Comment: MNRAS accepted, 19 pages, 14 figures