Search

Groundwater is a critical resource for supporting human consumption, stock water, agricultural use, and mineral or energy extraction as well as the environment. However, the quality of groundwater varies enormously from potable to hyper-saline, particularly in the Australian context. To evaluate the suitability of a groundwater resource, the spatial distribution of salinity within an aquifer is typically estimated by measuring the electrical conductivity (EC) of groundwater sampled from boreholes. However, drilling is a logistically and economically challenging task, and hydrogeologists are usually left with a sparse set of measurements from which to infer groundwater salinity over large spatial extents. Airborne electromagnetic (AEM) surveying is a geophysical technique for estimating the bulk electrical conductivity of the near-surface. Where AEM bulk conductivity is well correlated with groundwater salinity in aquifers, AEM is a useful tool for modelling salinity in the data sparse areas between boreholes. We present a probabilistic method for modelling groundwater salinity and a case study from the Keep River Plains in the Northern Territory. Co-located probabilistic AEM inversions and EC measurements on pore fluids at coincident locations were fused to calculate an empirical joint probability density function. This function allowed us to estimate salinity away from the bores by sampling the ensemble of AEM conductivities. Unlike deterministic methods that provide a single estimate of salinity, our method generates an ensemble of estimates, which can be used to quantify predictive uncertainty. The results provided by our method can feed into decision making while accounting for uncertainty, allowing responsible management of land and water resources., Open-Access Online Publication: March 03, 2023

The development of Northern Australia has been identified as a national priority, with water availability being fundamental to economic development. Surface water options are limited hence identification of new groundwater resources and water banking options is essential. Over the past four years, Geoscience Australia, in concert with State and Territory partners, has been involved in focussed groundwater investigations in 10 geographic areas as well as broader regional investigations (Figure 1). New data acquisition has included airborne electromagnetics (AEM); drilling (sonic, rotary mud, air core and diamond); slug and bore testing; ground geophysics (surface nuclear magnetic resonance, microgravity, passive seismic, seismic reflection and ground penetrating radar); borehole geophysics (induction, spectral gamma, nuclear magnetic resonance); hydrochemical and hydrodynamic analysis; age dating of water and landscape materials; and mapping (geomorphic, morphotectonic, regolith, geological and hydrological). These investigations inform hydrogeological assessments and water allocation planning.Overall, this multi-physics, inter-disciplinary approach has been critical in enabling the rapid identification and assessment of significant new potential fresh groundwater resources within tectonically inverted Palaeozoic sedimentary basins in the Fitzroy Basin (WA), Bonaparte Basin (WA-NT), Wiso Basin (NT), and Southern Georgina Basin (NT), and helped define the extents of a new groundwater resource for the town of Alice Springs (NT). Potential brackish and saline groundwater resources have also been identified in Cenozoic paleovalleys and Tertiary and Paleozoic Basins.

The East Kimberley Region of north-western Australia has been identified as a priority for potential agricultural development. Within this region, the Ord Bonaparte Plain is remote, with limited access in an area of great cultural and environmental sensitivity. Initially, spatio-temporal mapping using remote sensing (and potential field) data, combined with data on the deeper basin geology was used to plan an airborne electromagnetics (AEM) survey. The relatively resistive nature of the basin sediments has enabled the AEM to map the hydrostratigraphy to depths of 300-500m, except in the coastal zone affected by seawater intrusion. Two overlying aquifers, separated by a faulted, ‘leaky’ aquitard, have been identified. The AEM and remote sensing data were subsequently used to plan a ground magnetic resonance (GMR) survey. The latter has enabled a water table map to be constructed in an area with almost no drilling, while also enabling key aquifer properties to be determined. The target aquifer has a high free water content and high transmissivity. The GMR results have been validated by drilling, borehole Nuclear Magnetic Resonance (NMR), and induction logging. Integration of AEM, GMR and temporal (Landsat) remote sensing data has enabled rapid mapping and characterisation of the groundwater system in a data-poor, culturally and environmentally sensitive area. These data have also revealed complex faulting within and bounding the aquifer system, delineated the sea-water intrusion interface, and mapped groundwater dependent ecosystems. These data have been used to target drilling and pump testing that will inform groundwater modelling, water allocations and development decisions.

The delineation of near-surface (0-300m) hydrostratigraphy and tectonic features is essential for successful characterisation of groundwater systems and subsequent hydrogeological modeling. While most remote sensing of such systems is commonly achieved using high-resolution airborne electromagnetic data, validated by drilling data, and complemented by the use of terrain and multispectral data, it is shown that there is also a useful role for high-resolution magnetic survey data. Various filtering of gridded magnetic data, when image-enhanced and interrogated with other datasets, reveal features such as faults, dykes and other structures which may influence the distribution and movement of groundwater. One of the most useful enhancements of magnetic data is tilt, in which the range of data from ±90° acts as an automatic gain control to highlight both strong and weak source responses. While it is difficult to obtain accurate depth information from magnetic data, useful relative depth estimates can be obtained by using, for example, the Tilt-depth method, in which half the width between the ±45° contours of the tilt grid is a measure of the depth to source. These depth estimates can be calibrated, where possible, by comparison with other data. Dip directions of source contacts can be estimated by using the attitudes of multiscale edges, derived from the maxima of total horizontal derivative data. Examples of the utility of high-resolution magnetic data, in its complementary role, are presented for two groundwater assessment project areas — the Menindee Lakes region in western NSW and the Keep River catchment in the Northern Territory.

The Australian Government’s White Paper on Developing Northern Australia recognised that expanding the size of the Ord irrigation area in the Kimberley Region, northwest Australia offers the potential to significantly enhance both the profitability and economic resilience of the region. This paper reports on the preliminary results of hydrogeological investigations in the Ord Stage 3 development area, a 14,500 ha area of black soil plains in the Keep River floodplain, Northern Territory. Previous investigations in the Keep River floodplain identified potential for groundwater salinity, soil salinity and seawater intrusion (SWI) hazards. These earlier studies recognised that more comprehensive investigations were required to fully assess the risks of large-scale development of irrigated agriculture on groundwater quality and quantity. The Keep River Salinity Mapping Project has been established to provide baseline data on the groundwater system in the Keep River floodplain including aquifer and aquitard distribution and properties, and potential salinity hazards. Specifically, the main aims of the project are to: (1) map the 3D architecture and hydraulic properties of the soil, sub-soils and underlying paleovalley system; (2) map the SWI interface and variations in groundwater salinity; (3) identify potential surface water inundation risks; (4) identify groundwater-dependent ecosystems; and (5) carry out a hydrogeological assessment. Investigations include a programme of airborne electromagnetics (AEM), ground geophysics (ground magnetic resonance (GMR), passive seismic and microgravity), drilling and borehole geophysics, hydrogeological and hydrochemical investigations, and regional soils, geological and morphotectonic mapping. Products generated in this project will be used to parameterise a numerical groundwater model.

Neogene fault systems are increasingly recognised as an important control on hydraulic connectivity in some of Australia’s energy rich basins. However, accurate delineation of these faults systems is challenging and expensive. In this context, the main objective of the Exploring for the Future (EFTF) Surat-Galilee Basin (Phase 1) Project is to test novel methods for more cost-effective mapping of Neogene fault systems in the Coal Seam Gas (CSG) basins of eastern Australia. Methods assessed in this project include morphotectonic mapping using temporal remote sensing data and high-resolution terrain mapping techniques, airborne electromagnetics (AEM), and the use of earthquake databases to inform active tectonic and geomechanical analysis. The project is funded by Geoscience Australia (GA) as part of its EFTF Programme, and is focussed on exemplar areas in the Surat and Galilee Basins where Neogene fault activity has been interpreted on high-resolution 2D and 3D seismic reflection surveys. This paper reports on the use of airborne electromagnetics (AEM) for detecting near-surface (