Search

This paper presents the design and development of an integrated wireless power transfer and data communication system. The power and data transfer share a common inductive link that consists of two identical Helical coils placed on both sides of a carbon composite barrier. Power and data are transferred simultaneously through a 5-mm thick carbon composite barrier without any physical penetration or contact. Power transfer measurements show that the system can deliver 9.7 AC power to the receiving coil with a power transfer efficiency of 36% through the carbon composite barrier. The system achieves a bidirectional half-duplex data communication with the data rate of unit 1.2kbit/s.

© 2017 IEEE. We present the development of a low-loss, high-power, and ferriteless balun that operates over 0.1-1.6 GHz bandwidth. The proposed balun employs a novel compensated circuit, a single quarter-wave semirigid coaxial cable and an on-board inductor on a thermoset ceramic board to achieve high power and ultrawide bandwidth performance. The experimental results show that the balun achieves a measured average insertion loss of less than 0.5 dB and return loss of better than 10 dB from 100 MHz to more than 1.6 GHz. Within the measured bandwidth, the amplitude and phase imbalances are within ±1 dB and ±5°, respectively. Multiphysics analysis and high-power measurements demonstrate that the balun can handle more than 600 W and above at 1.6 GHz. To the best of our knowledge, the reported balun has the highest measured power handling capability per the largest 16:1 bandwidth ratio to date.

This paper presents a highly efficient power transfer system based on a co-design of a class-E power amplifier (PA) and a pair of inductively coupled Helical coils for through-metal-wall power transfer. Power is transferred wirelessly through a 3.1-mm thick aluminum barrier without any physical penetration and contact. Measurement results show that the class-E PA achieves a peak power gain of 25.2 dB and a maximum collector efficiency of 57.3%, all at 200 Hz. The proposed system obtains a maximum power transfer efficiency of 9% and it can deliver 5 W power to the receiver side through the aluminum barrier.