Search

The GW self-energy may become computationally challenging to evaluate because of frequency and momentum convolutions. These difficulties were recently addressed by the development of the multipole approximation (MPA) and the W-av methods: MPA accurately approximates full-frequency response functions using a small number of poles, while W-av improves the convergence with respect to the k-point sampling in 2D materials. In this work we (i) present a theoretical scheme to combine them, and (ii) apply the newly developed approach to the paradigmatic case of graphene. Our findings show an excellent agreement of the calculated QP band structure with angle resolved photoemission spectroscopy (ARPES) data. Furthermore, the computational efficiency of MPA and W-av allows us to explore the logarithmic renormalization of the Dirac cone. To this aim, we develop an analytical model, derived from a Dirac Hamiltonian, that we parameterize using ab-initio data. The comparison of the models obtained with PPA and MPA results highlights an important role of the dynamical screening in the cone renormalization., Comment: A. Guandalini and D. A. Leon contributed equally to this work

The properties of metallic systems with important and structured excitations at low energies, such as Cu, are challenging to describe with simple models like the plasmon pole approximation (PPA), and more accurate and sometimes prohibitive full frequency approaches are usually required. In this paper we propose a numerical approach to $GW$ calculations on metals that takes into account the frequency dependence of the screening via the multipole approximation (MPA), an accurate and efficient alternative to current full-frequency methods that was recently developed and validated for semiconductors and overcomes several limitations of PPA. We now demonstrate that MPA can be successfully extended to metallic systems by optimizing the frequency sampling for this class of materials and introducing a simple method to include the $\mathbf{q}\to 0$ limit of the intra-band contributions. The good agreement between MPA and full frequency results for the calculations of quasi-particle energies, polarizability, self-energy and spectral functions in different metallic systems confirms the accuracy and computational efficiency of the method. Finally, we discuss the physical interpretation of the MPA poles through a comparison with experimental electron energy loss spectra for Cu., Comment: 21 pages

We perform a density functional theory study of the effects of oxygen adsorption on the structural and electronic properties of Gr/Co(0001) and Gr/Co/Ir(111) interfaces. In both interfaces, the graphene-Co distance increases with increasing O concentration. The oxygen intercalation effectively decreases the electronic interaction, preventing the hybridization of graphene states with Co $d$-orbitals, hence (partly) restoring the typical Dirac cone of pristine graphene. In the case of graphene/Co 1ML/Ir(111), which presents a moir\'e pattern, the interplay between the O distribution and the continuous change of the graphene-Co registry can be used to tune graphene corrugation and electronic properties. The computed electronic properties are in very good agreement with previously reported angle resolved photoemission spectroscopy and photoemission electron microscopy measurements for Gr/Co(0001)., Comment: 15 pages, 15 figures

We study surface charge transfer doping of exfoliated black phosphorus (bP) flakes by copper using scanning tunneling microscopy (STM) and spectroscopy (STS) at room temperature. The tunneling spectra reveal a gap in correspondence of Cu islands, which is attributed to Coulomb blockade phenomena. Moreover, using line spectroscopic measurements across small copper islands, we exploit the potential of the local investigation, showing that the n-type doping effect of copper on bP is short-ranged. These experimental results are substantiated by first-principles simulations, which quantify the role of cluster size for an effective n-type doping of bP and explain the Coulomb blockade by an electronic decoupling of the topmost bP layer from the underlying layers driven by the copper cluster. Our results provide novel understanding, difficult to retrieve by transport measurements, of the doping of bP by copper, which appears promising for the implementation of ultra-sharp p-n junctions in bP.

In the $GW$ approximation, the screened interaction $W$ is a non-local and dynamical potential that usually has a complex frequency dependence. A full description of such dependence is possible but often computationally demanding. For this reason, it is still common practice to approximate $W(\omega)$ using a plasmon pole (PP) model. Such approach, however, may deliver an accuracy limited by its simplistic description of the frequency dependence of the polarizability, i.e. of $W$. In this work we explore a multi-pole approach (MPA) and develop an effective representation of the frequency dependence of $W$. We show that an appropriate sampling of the polarizability in the frequency complex plane and a multi-pole interpolation can lead to a level of accuracy comparable with full-frequency methods at much lower computational cost. Moreover, both accuracy and cost are controllable by the number of poles used in MPA. Eventually we validate the MPA approach in selected prototype systems, showing that full-frequency quality results can be obtained with a limited number of poles., Comment: 7 figures, 18 pages + 2 supplementary pages

We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphene film. At the same time, the FeCo intercalated layers induce a clear transition from a nearly undisturbed to a strongly hybridized graphene {\pi}-band, as measured by angle-resolved photoemission spectroscopy. A comparison of experimental results with the computed band structure and the projected density of states unveils a spin-selective hybridization between the {\pi} band of graphene and FeCo-3d states. Our results demonstrate that the reduced dimensionality, as well as the hybridization within the FeCo layers, induce a narrowing and a clear splitting of Fe 3d-up and Fe 3d-down spin bands of the confined FeCo layers with respect to bulk Fe and Co., Comment: 5 pages, 4 figures

We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr bands and Fe d states breaks the symmetry of the Dirac cone, with a downshift in energy of the apex by about 3 eV, and well-localized Fe intermixed states induced in the energy region just below the Fermi level. First principles electronic structure calculations show a large spin splitting of the Fe states, resulting in a majority spin channel almost fully occupied and strongly hybridized with Gr {\pi} states. X-ray magnetic circular dichroism on the Gr/Fe/Ir heterostructure reveals an ordered spin configuration with a ferromagnetic response of Fe layer(s), with enhanced spin and orbital configurations with respect to the bcc-Fe bulk values. The magnetization switches from a perpendicular easy magnetization axis when the Fe single layer is lattice matched with the Ir(111) surface to a parallel one when the Fe thin film is almost commensurate with graphene.

We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferromagnetically with weaker coupling and thermal stability, as deduced by element-selective X-ray magnetic circular dichroic signals. The robust antiferromagnetic coupling is stabilized by a superexchange interaction, driven by the out-of-plane molecular orbitals responsible of the magnetic ground state and electronically decoupled from the underlying metal via the graphene layer, as confirmed by ab initio theoretical predictions. These archetypal spin interfaces can be prototypes to demonstrate how antiferromagnetic and/or ferromagnetic coupling can be optimized by selecting the molecular orbital symmetry., Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in Nano. Lett. copyright American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.nanolett.7b04836

The moir\'e superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moir\'e pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moir\'e superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface., Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem. C , copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.jpcc.6b09875

Thanks to their highly tunable band gaps, graphene nanoribbons (GNRs) with atomically precise edges are emerging as mechanically and chemically robust candidates for nanoscale light emitting devices of modulable emission color. While their optical properties have been addressed theoretically in depth, only few experimental studies exist, limited to ensemble measurements and without any attempt to integrate them in an electronic-like circuit. Here we report on the electroluminescence of individual GNRs suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate, constituting thus a realistic opto-electronic circuit. Emission spectra of such GNR junctions reveal a bright and narrow band emission of red light, whose energy can be tuned with the bias voltage applied to the junction, but always lying below the gap of infinite GNRs. Comparison with {\it ab initio} calculations indicate that the emission involves electronic states localized at the GNR termini. Our results shed light on unpredicted optical transitions in GNRs and provide a promising route for the realization of bright, robust and controllable graphene-based light emitting devices., Comment: Supporting Information avail on the ACS website at DOI: 10.1021/acs.nanolett.7b03797

Surface-assisted polymerization of molecular monomers into extended chains can be used as the seed of graphene nanoribbon (GNR) formation, resulting from a subsequent cyclo-dehydrogenation process. By means of valence-band photoemission and ab-initio density-functional theory (DFT) calculations, we investigate the evolution of molecular states from monomer 10,10'-dibromo-9,9'bianthracene (DBBA) precursors to polyanthryl polymers, and eventually to GNRs, as driven by the Au(110) surface. The molecular orbitals and the energy level alignment at the metal-organic interface are studied in depth for the DBBA precursors deposited at room temperature. On this basis, we can identify a spectral fingerprint of C-Au interaction in both DBBA single-layer and polymerized chains obtained upon heating. Furthermore, DFT calculations help us evidencing that GNRs interact more strongly than DBBA and polyanthryl with the Au(110) substrate, as a result of their flatter conformation., Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem C after peer review and technical editing by the publisher. To access the final edited and published work see: http://pubsdc3.acs.org/articlesonrequest/AOR-IB49uBxIS3X6JdF3ieQ9