Search

The exploration addresses the effect of variable viscosity and thermal conductivity on the peristaltic mechanism of Bingham fluid. A two-dimensional non-uniform porous channel is considered for the fluid flow, which is assumed to be inclined. The impact of heat, slip conditions, wall properties, homogeneous and heterogeneous reactions are examined. The resulting nonlinear differential equations are solved by employing the perturbation method. The solutions acquired are analyzed and sketched through graphs that show that the variable viscosity renders a critical role in regulating the velocity of the fluid in the channel's central part. The stream function has been analyzed to observe the trapping phenomenon. Further, the obtained results find its application in understanding the flow of blood in micro arteries.

An artery narrowing referred to as atherosclerosis or stenosis causes a reduction in the diameter of the artery. When blood flow through an artery consists of stenosis, the issue of solute dispersion is more challenging to solve. A mathematical model is developed to examine the unsteady solute dispersion in an overlapping stenosed artery portraying blood as Bingham fluid model. The governing of the momentum equation and the constitutive equation is solved analytically. The generalized dispersion model is imposed to solve the convective-diffusion equation and to describe the entire dispersion process. The dispersion function at steady-state decreases at the center of an artery as the stenosis height increase. A reverse behavior is shown at an unsteady-state. As the plug core radius, time and stenosis height increase, the dispersion function decreases at the center of an artery. There is a high amount of red blood cells at the center of the artery but no influences near the wall. Hence, this model is useful in transporting the drug or nutrients to the targeted stenosed region in the treatment of diseases and in understanding many physiological processes.

In this paper aims, we found the fluid concentration after calculating the velocity and temperature of the fluid with a variable viscosity that depends on the fluid moving through an inclined porous channel. We examined the influences of certain parameters that are active on fluid velocity by analyzing the graphs obtained after we reached the momentum equation solution, and used the MATHEMATICA program for plot the velocity and temperature of the fluid for two types of flow (Poiseuille and Couette).

Recently, Zou et al. (2020a) published a theoretical analysis on the radial flow of a Bingham fluid, where they argued that the classical analysis by Dai and Bird (1981) violates the mass conservation. The present discussion aims to clarify this conflict between those two studies. It is noted that Zou et al. (2020a) presumed the gap-wise mass flux is negligible in the mass conservation equation, while Dai and Bird (1981) did not require so in their model, and this is found to be the origin of the conflict. In fact, Dai and Bird (1981)’s model is shown to not violate the mass conservation. Therefore, those two models should be viewed as separate models derived from different perspectives. Details of the major difference between the two models are discussed.

In this study, we performed direct simulations of particle suspensions in a simple shear flow with a viscoplastic model (Bingham fluid) using a finite-element/fictitious-domain method, as a model system for cuttings transport with a drilling mud in the oil and gas exploration. Bulk rheology and particle interaction were investigated via several example problems including single-particle, two-interacting particle, and many-particle problems for various solid fractions in both Bingham and Newtonian fluids. We report that, at low shear rate, huge reductions occur in both the relative bulk viscosity and angular velocity of particle suspension in a Bingham fluid compared to that in a Newtonian fluid. This indicates that, although particle incorporation increases bulk viscosity in a Bingham fluid, the amount of increase appears much smaller than that with the Newtonian medium, and particle motions were restricted to some extend at a low shear rate with a yield stress fluid. Moreover, the suppression in viscosity increase with particles disappears at a high shear rate, just like Newtonian particle suspension. This phenomenon has been interpreted by the suppressed particle angular rotation in a Bingham fluid. In addition, flow fields with low shear regions, where the viscosity of a Bingham fluid is high and the fluid mobility decreased significantly, on the left and right sides of a particle also confirm this interpretation. The two-interacting particle problem reveals delayed particle interaction with increased time period in particle trajectories (drafting, kissing, tumbling and separation) in a Bingham fluid. Similar behaviors with the suppression in viscosity increase can be also observed in the many-particle problem.

The paper examined a theoretical investigation of the stimulus of mass and heat transfer on the channel's peristaltic utilization of the MHD Bingham liquid. The research study is motivated to explore blood circulation in the little vessels by taking the slip, variable thermal conductivity, and thickness of the wall features into account. The leading constitutive equations are established based on low Reynolds number and approximations for long wavelengths. The solution for the resulting nonlinear energy and momentum equations is obtained using a semi-analytic method, while the exact solution for the concentration field is obtained. Using the MATLAB software, the influences of different constraints on the interest of physiological quantities are represented graphically. One of the considerable outcomes of the current model exposes that the existence of variable fluid properties boosts the rate as well as temperature level areas. The rheological and flow properties of various biological fluids can be derived from this model as a particular case. Moreover, the formation of stuck bolus diminishes for larger values of the magnetic and velocity slip constraints.

Accurate pressure drop estimation is important for drill string and bit nozzles design and optimized fluid circulations as well as identifying the drilling problems such as bit nozzle(s) washout or plugging. In this study, the Bingham Plastic model has been modified by applying a coefficient to its turbulent pressure loss calculations. This coefficient encompasses the effects of the drill pipe tool joints and other effects in estimation of pressure losses. The range of the coefficient was determined in field applications for different hole sizes and mud types. The results showed that applying a correction coefficient of 1.08–1.12 to turbulent pressure loss equations (depending on borehole size and mud type) improves the pressure loss estimation. By applying this coefficient, the estimated pressure losses are increased to compensate the under-estimation of the Bingham Plastic model. This is considered a significant contribution to accurate calculation of borehole hydraulics and in-time detection and identification of borehole problems and reduction of invisible lost time. The findings also showed that this enhanced effect is independent of the mud type. The use of this coefficient removes the necessity of using rather complex mud rheological models such as the Herschel–Bulkley model.

Present analysis is conducted for Bodewadt flow along a permeable plane surface immersed in a Bingham fluid, which represents a class of non-Newtonian fluids exhibiting yield stress. The resulting heat transfer phenomenon is analyzed in the existence of viscous dissipation. After implementing boundary layer approximations, von-Karman substitutions are employed resulting in a coupled non-linear system. For the numerical solution, a reliable numerical routine bvp4c based on collocation method, is adopted. Flow model contains a parameter Bn , measuring the relative importance of fluid yield stress. Boundary layer is markedly risen as a consequence of fluid yield stress. Viscous dissipation also remarkably influences the resulting heat transfer process. Subtle fluid dynamics quantities including normalized skin friction, disk cooling rate and volumetric flow rate are scrutinized under the influence of fluid yield stress. The results predict a deceleration in entrained flow whenever fluid exhibits yield stress.

In this work, the momentum and heat transfer characteristics of a time-dependent flow of Bingham plastic fluid over a heated isothermal sphere have been investigated numerically over wide ranges of conditions: Reynolds number, 5 ≤ Re ≤ 120, Bingham number, 0.1 ≤ Bn ≤ 100, Prandtl number, 0.7 ≤ Pr ≤ 100, frequency, π/4 ≤ ω* ≤ π and amplitude, 0 ≤ A ≤ 0.8. The influence of the fluid yield stress and inertia due to the imposed flow pulsations on the flow and thermal fields have been examined in detail. Detailed structure of the flow and temperature fields are analysed in terms of the instantaneous streamlines, isothermal contours, yielded/unyielded zones, surface pressure profiles, time-average drag coefficient and surface- and time-average Nusselt number. The influence of the frequency and amplitude of pulsations on the size of yielded (fluid-like) and unyielded (solid-like) zones is considered in order to understand convective heat transport. The size of yielded zones is seen to be in phase with the imposed pulsating velocity. However, the yield stress effects suppress the influence of flow pulsations. The temporal evolution of the drag coefficient and Nusselt number lag the imposed pulsating flow by different degrees thereby indicating the inherently different evolution of the momentum and thermal boundary layers. Broadly, the pulsating flow conditions may lead to up to 20% augmentation in heat transfer provided there is a moderate degree of advection and/or when the fluid yield stress effects are weak, i.e., small Bingham numbers. Thus, the maximum benefits of pulsating flow accrue in Newtonian fluids only. Finally, the present values of the time-average Nusselt number have been consolidated in the form of a predictive expression.

Grouting is a commonly used technique in rock engineering to enhance the joint strength and improve the stability of surrounding rock. Grout penetration characteristic is controlled by grouting parameters and has a significant role on practice. In the study, a numerical manifold method (NMM) for grout penetration process simulation in fractured rock mass is firstly proposed. The fluid flow behaviour of the grout is assumed to be a Bingham fluid and control equations are established using discrete fracture network model. The global discretization equation, element sub-matrixes and NMM simulation algorithm for grouting are presented. Then, numerical tests for grouting process in a single fracture and a regular fracture network are conducted firstly to verify the proposed NMM grouting model by comparing with analytical solutions and experimental results. Furthermore, the effects of mesh size, fracture and slurry parameters on the grouting performance are systematically investigated using a random fracture network example. The numerical results indicate that the grouted zone and propagation depth decrease as the mesh size of numerical model and yield strength increases, while it increases as initial fracture aperture and grouting pressure increases.

This paper discusses the well posedness of an initial value problem describing the motion of a Bingham fluid in a basin with a degenerate bottom topography. A physical interpretation of such motion is discussed. The system governing such motion is obtained from the Shallow Water-Bingham models in the regime where the Froude number degenerates, i.e taking the limit of such equations as the Froude number tends to zero. Since we are considering equations with degenerate coefficients, then we shall work with weighted Sobolev spaces in order to establish the existence of a weak solution. In order to overcome the difficulty of the discontinuity in Bingham's constitutive law, we follow a similar approach to that introduced in [G. DUVAUT and J.-L. LIONS, Springer-Verlag, 1976]. We study also the behavior of this solution when the yield limit vanishes. Finally, a numerical scheme for the system in 1D is furnished.

Accurate determination of hydraulic parameters such as pressure losses, equivalent circulation density (ECD), etc. plays profound roles in drilling, cementing and other well operations. Hydraulics characterization requires that all factors are considered as the neglect of any could become potential sources of errors that would be detrimental to the overall well operation. Drilling Hydraulics has been extensively treated in the literature. However, these works almost entirely rely on the assumption that the drill string lies perfectly at the center of the annulus—the so-called “concentric annulus”. In reality, concentricity is almost never achieved even when centralizers are used. This is because of high well inclination angles and different string geometries. Thus, eccentricity exists in practical oil and gas wells especially horizontal and extended reach wells (ERWs) and must be accounted for. The prevalence of drillstring (DS) eccentricity in the annulus calls for a re-evaluation of existing hydraulic models. This study evaluates the effect of drilling fluid rheology types and DS eccentricity on the entire drilling hydraulics. Three non-Newtonian fluid models were analyzed, viz: Herschel Bulkley, power law and Bingham plastic models. From the results, it was observed that while power law and Bingham plastic models gave the upper and lower hydraulic values, Herschel Bulkley fluid model gave annular pressure loss (APL) and ECD values that fall between the upper and lower values and provide a better fit to the hydraulic data than power law and Bingham plastic fluids. Furthermore, analysis of annular eccentricity reveals that APLs and ECD decrease with an increase in DS eccentricity. Pressure loss reduction of more than 50% was predicted for the fully eccentric case for Herschel Bulkley fluids. Thus, DS eccentricity must be fully considered during well planning and hydraulics designs.

The paper is devoted to the study of convective motions of viscoplastic fluids in closed two-dimensional rectangular domains with different aspect ratios under lateral heating. The problem was solved numerically using the ANSYS Fluent software. The Herschel-Bulkley model was chosen for describing the rheological behavior of the fluid. Under certain rheological parameters, this model was transformed into a Newtonian fluid model, whose behavior was also simulated as a limiting case. Based on the calculated results, the dependences of the maximum value of the stream function in the cavity on the Rayleigh number are plotted. It was found that at small Rayleigh numbers the intensity of motion is close to zero. At a certain threshold value of the Rayleigh number there is a sharp increase in the intensity of motion, and a further increase in the Rayleigh number causes an almost linear growth of the maximum value of the stream function. For each of the considered ratios of cavity sides, the "threshold" values of the Rayleigh number, at which a sharp increase in the intensity of motion of liquid is observed, were determined. The obtained values of Rayleigh numbers turned out to be close to the "threshold" values of the Rayleigh number for the Bingham fluid found in the works of other authors earlier. The fields of the stream function and the square root of the second invariant of the viscous stress tensor were obtained for different values of the Rayleigh number and different aspect ratios. The scenarios of rearrangement of quasisolid motion zones with increasing Rayleigh number were compared with the available results for the Bingham fluid.

Modeling of fluids with complex rheology in the lattice Boltzmann method (LBM) is typically realized through the introduction of an effective viscosity. For fluids with a yield stress behavior, such as so-called Bingham fluids, the effective viscosity has a singularity for low shear rates and may become negative. This is typically avoided by regularization such as Papanastasiou’s method. Here we argue that the effective viscosity model can be re-interpreted as a generalized equilibrium in which no violation of the stability constraint is observed. We implement a Bingham fluid model in a three-dimensional cumulant lattice Boltzmann framework and compare the direct analytic effective viscosity/generalized equilibrium method to the iterative approach first introduced by Vikhansky which avoids the singularity in viscosity that can arise in the analytic method. We find that both methods obtain similar results at coarse resolutions. However, at higher resolutions the accuracy of the regularized method levels off while the accuracy of the direct method continuously improves. We find that the accuracy of the proposed direct method is not limited by the singularity in viscosity indicating that a regularization is not strictly necessary.

This framework presents heat transfer analysis for swirling flow of viscoplastic fluid bounded by a permeable rotating disk. Problem formulation is made through constitutive relations of Bingham fluid model. Viscous dissipation effects are pre-served in the mathematical model. Entropy production analysis is made which is yet to be explored for the von-Karman flow of non-Newtonian fluids. Having found the similarity equations, these have been dealt numerically for broad parameter values. The solutions are remarkably influenced by wall suction parameter and Bingham number which measures the fluid yield stress. Akin to earlier numerical results, thermal boundary-layer suppresses upon increasing wall suction velocity. Thermal penetration depth is much enhanced when fluid yield stress becomes large. Higher heat transfer rate can be accomplished by employing higher suction velocity at the disk. However, deterioration in heat transfer is anticipated as fluid yield stress enlarges. Current numerical results are in perfect line with those of an existing article in limiting sense.

We study the onset of convection within a rectangular porous cavity which is saturated with a Bingham fluid and subjected to a uniform internal heat generation. When such a cavity is saturated by a Newtonian fluid, convection takes place at all nonzero values of the Darcy–Rayleigh number, Ra. In such cases convection takes the form of two contrarotating cells with flow down the cold sidewalls when Ra first increases from zero. However, when the enclosure is saturated by a Bingham fluid, then we find that the cavity remains stagnant until the Darcy–Rayleigh number is sufficiently large that buoyancy overcomes the yield threshold. Numerical solutions are obtained using a second-order accurate finite-difference methodology where convergence is accelerated using line relaxation. The presence of the yield surfaces, which mark the boundaries of stagnant regions, is modelled by means of a regularization of the yield threshold. It is found that the critical value of Ra above which convection arises depends roughly linearly on the value of Rb, which may be described as a convective porous Bingham number. When the cavity has a sufficiently large aspect ratio, the fluid admits more than one stable steady-state solution.

Solutions for radial flow of a Bingham fluid are analyzed in this paper. It aims to eliminate confusions in the literature concerning the plug flow region in different solutions for analysis and design of grouting in rock fractures. The analyses based on the force balance equation reveal that the plug flow region in Bingham radial flow is independent of the fracture radius, and is not a growth function adapted from the solution of one-dimensional (1D) slit flow according to ‘similarity’. Based on the shear stress distribution, we analytically proposed that a non-uniform plug flow region cannot exist. The Bingham fluid (grout) penetration and flowrate evolution as functions of grouting time are given using the correct expression for the plug flow region. The radius-independent plug flow region and the presented flowrate evolution equation are also verified numerically. For radial flow, the relative penetration length is equal to the relative width of plug flow region, which is the same as that for 1D channel flow. Discrepancies in analytical solutions for grout penetration and flowrate evolution were also illustrated. The clarification of the plug flow region and evaluation of discrepancies in analytical solutions presented in this work could simplify modeling and design of grouting in rock engineering applications.

The current paper is focused on analyzing the flow of viscoplastic fluid in a cavity that is driven by the two walls. The Lattice Boltzmann method (LBM) is used to solve the discrete Boltzmann equation. To represent the stress-strain rate relationship of viscoplastic fluids, the Bingham Papanastasiou constitutive model is considered. Cavity flow filled with Bingham fluids is considered for validating the present LBM code. After successful validation of the code, the analysis is extended for three dissimilar wall motions-simultaneous and opposed movement of the parallel facing walls, and the simultaneous motion of non-facing walls. The flow dynamics of Bingham fluid is influenced by Reynolds and Bingham numbers which can be studied using velocity and streamline plots. Subsequently, the yielded and un-yielded zones in a cavity have been effectively tracked using the limiting condition of yield stress. Further, the effect of wall motion on the variation of those zones inside a cavity has been studied. Finally, the drag coefficient for considered wall motions is presented.

A mathematical study is developed for the electro-osmotic flow of a non-Newtonian fluid in a wavy microchannel in which a Bingham viscoplastic fluid model is considered. For electric potential distributions, a Poisson-Boltzmann equation is employed in the presence of an electrical double layer (EDL). The analytical solutions of dimensionless boundary value problems are obtained with the Debye-Huckel theory, the lubrication theory, and the long wavelength approximations. The effects of the Debyelength parameter, the plug flow width, the Helmholtz-Smoluchowski velocity, and the Joule heating on the normalized temperature, the velocity, the pressure gradient, the volumetric flow rate, and the Nusselt number for heat transfer are evaluated in detail using graphs. The analysis provides important findings regarding heat transfer in electroosmotic flows through a wavy microchannel.

In an effort to further extend bearing life, the authors have attempted to acquire greater knowledge regarding lubricating grease behavior in a bearing. While conducting experiments, some kinds of difficulties commonly arise when attempting to observe grease behavior directly from the bearing exterior without removing seals and shields. Making a breakthrough such a troubling aspect, X-ray computed tomography (CT), which is one of the non-destructive inspection techniques, was employed and resulted in visualizing remarkable details of grease distribution in a resin ball bearing. Hydrodynamic grease transition from churning to channeling state was well revealed by the mixture distribution of urea and barium-based greases which have different properties of X-ray absorption capability. Furthermore, the three dimensional unsteady liquid-gas multi-phase flows analysis was performed. Hydrodynamic feature of grease was regarded as a non-Newtonian fluid, which shows a highly non-linear flow curve, and the constitutive equation of modified Bingham plastic model proposed by Papanastasiou was applied to rheological property. Through these novel experimental and calculation approaches, several new insights about grease behavior inside a ball bearing were brought out.

The linear stability of channel flows driven by pressure drops is carried out for fluids that exhibit a yield stress, the mechanical response of which is prescribed by the Bingham constitutive relation or two of its regularizations: the model due to Allouche and co-workers that is usually referred to as the “simple model”, and Papanastasiou model. Despite the fact that these two regularized models provide a good approximation of the steady Poiseuille flow of a Bingham fluid, they fail to predict the stability characteristics of the exact Bingham model. The critical thresholds for the onset of turbulence predicted by using the simple and Papanastasiou models are essentially the same, but they differ significantly from that of the exact Bingham model. This discrepancy is shown to be due to the absence of energy dissipation in the rigid core of a Bingham fluid.

When drilling an oil well, a viscous fluid is injected to aid drilling. This fluid is also responsible for removing the cuttings and maintaining structural stability of well. The rheology of this drilling fluid has a direct influence on the cleaning of the well, on the dynamics of the fluid in pipe and annular areas. Linear mathematical extrapolations for high pressure and high temperature environments can lead to rheology errors up to 75%. In this study, a finite volume model was developed to simulate the flow of a water-based mud in annular and jetting environments in the drilling environment. Annulars were made by steel pipes and permeable formations. The fluids evaluated were developed empirically with xanthan gum and bentonite clay. The numerical results are consistent with literature and represent characteristics of a Yield Power Law fluid and a Bingham plastic. A comparison was made with water, allowing a correlation between rheological effects and fluid dynamics in annular and high vorticity regions.

A thin fluid film formed by withdrawing a vertical plate is being studied theoretically. It is the case of a viscoplastic fluid described by the Bingham model. The boundary-value problem is formulated by the lubrication theory. The analysis presented herein required to solve numerically a system of ordinary differential equations at appropriate boundary conditions. For the viscoplastic fluid, we have predicted a film thickness over a wide range of a capillary number (10−4 to 10), with a particular emphasis on finding the free surface location at various conditions: (a) the unyielded region is much larger than the yielded one; (b) without the yielded region; and (c) the unyielded region is smaller but is compared with the yielded one. For the case of Bingham fluid and the limiting case of Newtonian fluid, the agreement was found between our theory and the experiment for the considered capillary number range.A thin fluid film formed by withdrawing a vertical plate is being studied theoretically. It is the case of a viscoplastic fluid described by the Bingham model. The boundary-value problem is formulated by the lubrication theory. The analysis presented herein required to solve numerically a system of ordinary differential equations at appropriate boundary conditions. For the viscoplastic fluid, we have predicted a film thickness over a wide range of a capillary number (10−4 to 10), with a particular emphasis on finding the free surface location at various conditions: (a) the unyielded region is much larger than the yielded one; (b) without the yielded region; and (c) the unyielded region is smaller but is compared with the yielded one. For the case of Bingham fluid and the limiting case of Newtonian fluid, the agreement was found between our theory and the experiment for the considered capillary number range.

The aiding-buoyancy mixed convection heat transfer in Bingham plastic fluids from an isothermal cylinder of elliptical and circular shape in a vertical adiabatic channel is numerically investigated. For a fixed shape of the elliptical cylinder E = 2 (ratio of major to minor axes), the effect of confinement is studied for three values of blockage ratio, B, defined as the ratio of the channel width to the circumference of the cylinder/π, as 6.5, 2.17 and 1.3. In order to delineate the role of cross-section of the cylinder, results are also presented here for a circular cylinder of the same heat transfer area as the elliptical cylinder. The results presented herein span the range of conditions as: Bingham number, 0 ≤ Bn ≤ 100, Reynolds number, 1 ≤ Re ≤ 40, and Prandtl number, 1 ≤ Pr ≤ 100 over the range of Richardson number Ri = 0 (pure forced convection) to Ri = 10. Extensive results on drag coefficient, local and surface averaged values of the Nusselt number and yield surfaces are presented herein to elucidate the combined effects of buoyancy, blockage ratio and fluid yield stress. The morphology of the yield surfaces shows that the unyielded plug regions formed upstream and downstream of the cylinder grow faster at low Reynolds numbers with the increasing yield stress effects under the weak buoyancy forces, i.e., small values of Grashof or Richardson number. The heat transfer enhancement is observed with the increasing channel-confinement due to the sharpening of the temperature gradients near the surface of the cylinder. The average Nusselt number shows a positive dependence on the Reynolds number, Prandtl number and Richardson number irrespective of the shape of the cylinder or the type of fluid. By employing the modified definitions of the dimensionless parameters (based on the two choices of the overall effective fluid velocity), predictive correlations have been established for estimating the value of the average Nusselt number in a new application.

This work analyses the entrance region flow of Bingham nanofluids in cylindrical concentric annuli. In this discussion, water is used as the base fluid which is embedded with the silver(Ag) and copper(Cu) nanoparticles coalescing with Bingham fluid. The investigation has been carried out by rotating the inner cylinder, while the outer cylinder is assumed to be at rest. A finite-difference analysis is used to obtain the axial, radial, tangential velocity components and the pressure along the radial direction. With the Prandtl's boundary layer assumptions, the continuity and momentum equations are solved iteratively using a finite difference method. Computational results are obtained for various non-Newtonian flow parameters, different volume fraction parameters and geometrical considerations. This work’s main interest is to study the development of velocity profiles and pressure drop in the entrance region of the annuli. The present results are compared with the results available in the literature for various particular cases and it is found to be in good agreement.

We are concerned with a system of partial differential equations (PDEs) describing internal flows of homogeneous incompressible fluids of Bingham type in which the value of activation (the so-called yield) stress depends on the internal pore pressure governed by an advection–diffusion equation. After providing the physical background of the considered model, paying attention to the assumptions involved in its derivation, we focus on the PDE analysis of the initial and boundary value problems. We give several equivalent descriptions for the considered class of fluids of Bingham type. In particular, we exploit the possibility to write such a response as an implicit tensorial constitutive equation, involving the pore pressure, the deviatoric part of the Cauchy stress and the velocity gradient. Interestingly, this tensorial response can be characterized by two scalar constraints. We employ a similar approach to treat stick-slip boundary conditions. Within such a setting we prove long-time and large-data existence of weak solutions to the evolutionary problem in three dimensions.

In this paper, we study the peristaltic transport of incompressible Bingham plastic fluid in a curved channel. The formulation of the problem is presented through, the regular perturbation technique for small values of is used to find the final expression of stream function. The numerical solution of pressure rise per wave length is obtained through numerical integration because its analytical solution is impossible. Also the trapping phenomenon is analyzed. The effect of the variation of the physical parameters of the problem are discussed and illustrated graphically.