Search

Bacopa monniera is an important source of metabolites with pharmaceutical value. It has been regarded as a valuable medicinal plant and its entire commercial requirement is met from wild natural population. Recently, metabolic engineering has emerged as an important solution for sustained supply of assured and quality raw material for the production of active principles. Present report describes efficient in vitro multiplication and transformation method for genetic manipulation of this species. MS medium supplemented with 2 mgl(-1) BA and 0.2 mgl(-1) IAA was found optimum for maximum shoot regeneration (98.33 %) from in vitro leaves with 2-3 longitudinal cuts. Agrobacterium tumefaciens-mediated transformation method was used for generating transgenic B. monniera plants. Putative transformants were confirmed by GUS assay and PCR based confirmation of hptII gene. DNA blot analysis showed single copy insertion of transgene cassette. An average of 87.5 % of the regenerated shoots were found PCR positive for hptII gene and GUS activity was detected in leaves of transgenic shoots at a frequency of 82.5 % The efficient multiple shoots regeneration system described herein may help in mass production of B. monniera plant. Also, the high frequency transformation protocol described here can be used for genetic engineering of B. monniera for enhancement of its pharmaceutically important metabolites.

Aboitic stress such as drought and salinity are class of major threats, which plants undergo through their lifetime. Lignin deposition is one of the responses to such abiotic stresses. The gene encoding Cinnamoyl CoA Reductase (CCR) is a key gene for lignin biosynthesis, which has been shown to be over-expressed under stress conditions. In the present study, developing seedlings of Leucaena leucocephala (Vernacular name: Subabul, White popinac) were treated with 1 % mannitol and 200 mM NaCl to mimic drought and salinity stress conditions, respectively. Enzyme linked immunosorbant assay (ELISA) based expression pattern of CCR protein was monitored coupled with Phlorogucinol/HCl activity staining of lignin in transverse sections of developing L. leucocephala seedlings under stress. Our result suggests a differential lignification pattern in developing root and stem under stress conditions. Increase in lignification was observed in mannitol treated stems and corresponding CCR protein accumulation was also higher than control and salt stress treated samples. On the contrary CCR protein was lower in NaCl treated stems and corresponding lignin deposition was also low. Developing root tissue showed a high level of CCR content and lignin deposition than stem samples under all conditions tested. Overall result suggested that lignin accumulation was not affected much in case of developing root however developing stems were significantly affected under drought and salinity stress condition.

Cinnamoyl CoA reductase (CCR) carries out the first committed step in monolignol biosynthesis and acts as a first regulatory point in lignin formation. CCR shows multiple substrate specificity towards various cinnamoyl CoA esters. Here, in Silico mutagenesis studies of active site residues of Ll-CCRH1 were carried out. Homology modeling based modeled 3D structure of Ll-CCRH1 was used as template for in Silico mutant preparations. Docking simulations of Ll-CCRH1 mutants with CoA esters by AutoDock Vina tools showed altered substrate specificity as compared to wild type. The study evidences that conformational changes, and change in geometry or architecture of active site pocket occurred following mutations. The altered substrate specificity for active site mutants suggests the possible physiological role of CCR either in lignin formation or in defense system in plants. Abbreviations Ll-CCRH1 - Leucaena leucocephala cinnamoyl CoA reductase 1, OPLS - Optimized Potentials for Liquid Simulations, RMSD - Root Mean Square Deviation.

Farnesyl pyrophosphate synthase (FPS; EC 2.5.1.10) is a key enzyme in isoprenoid biosynthetic pathway and provides precursors for the biosynthesis of various pharmaceutically important metabolites. It catalyzes head to tail condensation of two isopentenyl pyrophosphate molecules with dimethylallyl pyrophosphate to form C15 compound farnesyl pyrophosphate. Recent studies have confirmed FPS as a molecular target of bisphosphonates for drug development against bone diseases as well as pathogens. Although large numbers of FPSs from different sources are known, very few protein structures have been reported till date. In the present study, FPS gene from medicinal plant Bacopa monniera (BmFPS) was characterized by comparative modeling and docking. Multiple sequence alignment showed two highly conserved aspartate rich motifs FARM and SARM (DDXXD). The 3-D model of BmFPS was generated based on structurally resolved FPS crystal information of Gallus gallus. The generated models were validated by various bioinformatics tools and the final model contained only α-helices and coils. Further, docking studies of modeled BmFPS with substrates and inhibitors were performed to understand the protein ligand interactions. The two Asp residues from FARM (Asp100 and Asp104) as well as Asp171, Lys197 and Lys262 were found to be important for catalytic activity. Interaction of nitrogen containing bisphosphonates (risedronate, alendronate, zoledronate and pamidronate) with modeled BmFPS showed competitive inhibition; where, apart from Asp (100, 104 and 171), Thr175 played an important role. The results presented here could be useful for designing of mutants for isoprenoid biosynthetic pathway engineering well as more effective drugs against osteoporosis and human pathogens. Abbreviations IPP - Isopentenyl Pyrophosphate, DMAPP - Dimethylallyl Pyrophosphate, GPP - Geranyl Pyrophosphate, FPP - FPPFarnesyl Pyrophosphate, DOPE - Discrete Optimized Protein Energy, BmFPS - Bacopa monniera Farnesyl Pyrophosphate Synthase, RMSD - Root Mean square Deviation, OPLS-AA - Optimized Potentials for Liquid Simulations- All Atom, FARM - First Aspartate Rich Motif, SARM - Second Aspartate Rich Motif.

Leucaena leucocephala is fast growing leguminous tree species, acclimatized to variety of soil and climatic conditions. It is widely used for pulp production in India. Pulp mainly consists of cellulose, which is a simple polymer of unbranched β-1, 4-linked glucan chains. The polymerization of glucose residues into a β-1, 4-linked backbone is catalysed by the enzyme cellulose synthase (CesA). Here, cDNAs encoding CesA genes from Leucaena were isolated and characterized. The two complete cDNAs of 3.228 kb and 3.222 kb encoding CesA gene from L. leucocephala were designated as Ll-7CesA (FJ871987) and Ll-8CesA (GQ267555) respectively. In-silico studies showed that Ll-7CesA has 95.2% identities and Ll- 8CesA has 95.8% identities with Acacia mangium CesA2. Phylogenetic analysis revealed significant similarity with known dicot CesA genes. The deduced amino acid sequence of both CesA genes contained the conserved D, D, D, QxxRW motif, eight membrane spanning regions and a putative zinc binding domain, which are characteristic of glycosyltransferases. DNA blot analysis suggested, CesA gene to be in multiple copies in Leucaena genome. Semi quantitative and quantitative real-time PCR expression analysis of Ll-7CesA gene showed more expression in stem than leaf and not detected in root where as Ll-8CesA gene was expressed more in stem than leaf and root. Overall Ll-8CesA was expressed in all tested tissues and could be involved in active cellulose biosynthesis.

Both cDNA including 5′UTR and 3′UTR and genomic clones of cinnamyl alcohol dehydrogenase (CAD) were isolated and characterized from a pulp-yielding leguminous tree Leucaena leucocephala (LlCAD1). The deduced amino acid sequence shared high identity with orthologous sequences of Acacia mangium × Acacia auriculiformis (83%), Medicago sativa (83%), Nicotiana tabaccum (83%) and Aralia cordata (81%). Full length cDNA contained 78 bases of 5′UTR and 283 bases of 3′UTR, while the genomic clone contained 5 exons and 4 introns. Western blot analysis revealed elevated expression of LlCAD1 in seedling roots and shoots compared to leaves. Sense and antisense CAD tobacco transgenics showed increased and reduced CAD activity accompanied by a change in monomeric lignin composition. Histochemical staining of lignin in down-regulated plants suggested an increase in aldehyde units and a decrease in S/G ratio. Down-regulation of CAD resulted in accumulation of syringic, ferulic, p-coumaric and sinapic acids compared to untransformed controls. These observations were validated by anatomical studies of down-regulated transgenic stems which showed thin walled, elongated phloem and xylem fibres, accompanied by a reduction in the density of vessel elements and amount of secondary xylem when compared to untransformed plants. Furthermore, Klason lignin analysis of CAD antisense transgenics showed 7–32% reduced lignin and normal phenotype as compared to untransformed plants. Such a reduction was not noticed in up-regulated transgenics. These results demonstrate a unique opportunity to explore the significant role that down-regulation of CAD gene plays in reducing lignin content thereby offering potential benefits to the pulp and paper industry.

Leucaena leucocephala is a fast growing multipurpose legume tree used for forage, leaf manure, paper and pulp. Lignin in Leucaena pulp adversely influences the quality of paper produced. Developing transgenic Leucaena with altered lignin by genetic engineering demands an optimized regeneration system. The present study deals with optimization of regeneration system for L. leucocephala cv. K636. Multiple shoot induction from the cotyledonary nodes of L. leucocephala was studied in response to cytokinins, thidiazuron (TDZ) and N(6)-benzyladenine (BA) supplemented in half strength MS (½-MS) medium and also their effect on in vitro rooting of the regenerated shoots. Multiple shoots were induced from cotyledonary nodes at varied frequencies depending on the type and concentration of cytokinin used in the medium. TDZ was found to induce more number of shoots per explant than BA, with a maximum of 7 shoots at an optimum concentration of 0.23 µM. Further increase in TDZ concentration resulted in reduced shoot length and fasciation of the shoots. Liquid pulse treatment of the explants with TDZ did not improve the shoot production further but improved the subsequent rooting of the shoots that regenerated. Regenerated shoots successfully rooted on ½-MS medium supplemented with 0.54 µM α-naphthaleneacetic acid (NAA). Rooted shoots of Leucaena were transferred to coco-peat and hardened plantlets showed ≥ 90 % establishment in the green house.

Caffeoyl coenzyme A O-methyltransferase (CCoAOMT) is an important enzyme that participates in lignin biosynthesis especially in the formation of cell wall ferulic esters of plants. It plays a pivotal role in the methylation of the 3-hydroxyl group of caffeoyl CoA. Two cDNA clones that code CCoAOMT were isolated earlier from subabul and in the present study; 3D models of CCoAOMT1 and CCoAOMT2 enzymes were built using the MODELLER7v7 software to find out the substrate binding sites. These two proteins differed only in two amino acids and may have little or no functional redundancy. Refined models of the proteins were obtained after energy minimization and molecular dynamics in a solvated water layer. The models were further assessed by PROCHECK, WHATCHECK, Verify_3D and ERRAT programs and the results indicated that these models are reliable for further active site and docking analysis. The refined models showed that the two proteins have 9 and 10 alpha-helices, 6 and 7 beta-sheets respectively. The models were used for docking the substrates CoA, SAM, SAH, caffeoyl CoA, feruloyl CoA, 5-hydroxy feruloyl CoA and sinapyl CoA which showed that CoA and caffeoyl CoA are binding with high affinity with the enzymes in the presence and absence of SAM. It appears therefore that caffeoyl CoA is the substrate for both the isoenzymes. The results also indicated that CoA and caffeoyl CoA are binding with higher affinity to CCoAOMT2 than CCoAOMT1. Therefore, CCoAOMT2 conformation is thought to be the active form that exists in subabul. Docking studies indicated that conserved active site residues Met58, Thr60, Val63, Glu82, Gly84, Ser90, Asp160, Asp162, Thr169, Asn191 and Arg203 in CCoAOMT1 and CCoAOMT2 enzymes create the positive charge to balance the negatively charged caffeoyl CoA and play an important role in maintaining a functional conformation and are directly involved in donor-substrate binding.

Dhurrinase, a cyanogenic β-glucosidase from Sorghum bicolor is the key enzyme responsible for the hydrolysis of dhurrin to produce toxic hydrogen cyanide, as a part of plant defence mechanism. Dhurrinase 1 (SbDhr1) and dhurrinase 2 (SbDhr2), two isozymes have been isolated and characterized from S. bicolor. However, there is no information in the literature about the three dimensional (3D) structure of SbDhr2 and molecular interactions involved between the protein and ligand. In this study, the three dimensional structure of SbDhr2 was built based on homology modeling by using the X-ray crystallographic structure of its close homologue SbDhr1 as the template. The generated 3D model was energy minimized and the quality was validated by Ramachndran plot, various bioinformatic tools and their relevant parameters. Stability, folding-unfolding and flexibility of the modeled SbDhr2 was evaluated on the basis of RMSD, radius of gyration (Rg) and RMSF values respectively, obtained through molecular dynamic (MD) simulation. Further, molecular docking was performed with its natural substrate dhurrin, one substrate analogue, three un-natural substrates, and one inhibitor. Analysis of molecular interactions in the SbDhr2-ligand complexes revealed the key amino acid residues responsible to stabilize the ligands within the binding pocket through non-bonded interactions and some of them were found to be conserved (Glu239, Tyr381, Trp426, Glu454, Trp511). Reasonably broader substrate specificity of SbDhr2 was explained through the wider entrance passage observed in comparison to SbDhr1.

Triterpenoid saponins are the class of secondary metabolites, synthesized via isoprenoid pathway. Oxidosqualene cyclases (OSCs) catalyzes the cyclization of 2, 3-oxidosqualene to various triterpene skeletons, the first committed step in triterpenoid biosynthesis. A full-length oxidosqualene cyclase cDNA from Bacopa monniera (BmOSC) was isolated and characterized. The open reading frame (ORF) of BmOSC consists of 2,292 bp, encoding 764 amino acid residues with an apparent molecular mass of 87.62 kDa and theoretical pI 6.21. It contained four QxxxxxW motifs, one Asp-Cys-Thr-Ala-Glu (DCTAE) motif which is highly conserved among the triterpene synthases and another MWCYCR motif involved in the formation of triterpenoid skeletons. The deduced amino acid sequence of BmOSC shares 80.5 % & 71.8 % identity and 89.7 % & 83.5 % similarity with Olea europaea mixed amyrin synthase and Panax notoginseng dammarenediol synthase respectively. Phylogenetic analysis revealed that BmOSC is closely related with other plant OSCs. Quantitative real-time PCR (qRT-PCR) data showed that BmOSC is expressed in all tissues examined with higher expression in stem and leaves as compared to roots and floral parts.

Medicinal plants are extensively utilized in traditional and herbal medicines, both in India and around the world due to the presence of diverse low molecular weight natural products such as flavonoids, alkaloids, terpenoids and sterols. Flavonoids which have health benefits for humans are the large class of phenylpropanoid-derived secondary metabolites and are mostly glycosylated by UDP-glycosyltransferases (UGTs). Although large numbers of different UGTs are known from higher plants, very few protein structures have been reported till now. In the present study, the three-dimensional model of flavonoid specific glycosyltransferases (WsFGT) from Withania somnifera was constructed based on the crystal structure of plant UGTs. The resulted model was assessed by various tools and the final refined model revealed GT-B type fold. Further, to understand the sugar donors and acceptors interactions with the active site of WsFGT, docking studies were performed. The amino acids from conserved PSPG box were interacted with sugar donor while His18, Asp110, Trp352 and Asn353 were important for catalytic function. This structural and docking information will be useful to understand the glycosylation mechanism of flavonoid glucosides. Abbreviations DOPE - Discrete Optimized Potential Energy, PDB - Protein Data Bank, PSPG - Plant Secondary Product Glycosyltransferase, RMSD - Root Mean Squared Deviation, UDP - Uridine diphosphate, UGT - UDP-glycosyltransferases.

The phenylpropanoid pathway is responsible for the biosynthesis of a variety of products that include lignin, flavonoids and hydroxycinnamic acid conjugates. Many intermediates and end products of this pathway play important role in plants as phytoalexins, antiherbivory compounds, antioxidants, ultra-violet (UV) protectants, pigments and aroma compounds. Lignin has far reaching impacts on agriculture, industry and the environment, making phenylpropanoid metabolism a globally important part of plant biochemistry. The mechanical support provided by lignin prevents lodging, a problem in many agronomically important plants, it also provides a hydrophobic surface, essential for longitudinal water transport, and provides a barrier against pathogens. Finally the many functions of lignin and related products in resistance to biotic and abiotic stresses make the phenylpropanoid pathway vital to the health and survival of plants. Besides its critical role in normal plant health and development, high lignin levels are problematic in the agro-industrial exploitation of various plant species. Lignin is considered an undesirable component in paper manufacture, and has a negative impact on forage crop digestibility. Leucaena leucocephala is one of the most versatile, fast growing commercially important trees for paper and pulp industry in India, contributing 1/4th of the total raw material. Lignin composition, quantity and distribution are known to affect the agro-industrial utilization of plant biomass. High quantity and low Syringyl (S) to Guaiacyl (G) lignin ratio plays a detrimental role in economy and ecology of paper production. Every unit increase in S/G ratio decreases the cost of paper production by two and half times. Moreover chemical processing of pulp for lignin removal releases chlorinated organic compounds in effluent, which are hazardous and a serious threat to the environment. Hence, there is currently intense interest in modifying the content and/or composition of the cell wall structural polymer (lignin) as a means of improving the efficiency of the paper pulping process for forest trees. To engineer plants with agronomically useful lignin related traits, we need to devise strategies that can flexibly and predictably yield reductions in lignin content and/or changes in lignin monomer composition. Our studies have concentrated on attempts to alter the levels of enzymes involved in early as well as late phenylpropanoid pathway, mainly by downregulation or upregulation of the phenylpropanoid pathway genes in transgenic L. leucocephala and tobacco plants. Besides, we are also working on some R2R3 type MYB transcription factors supposed to play important role in lignin biosynthesis and some other genes which are not directly involved in phenylpropanoid pathway, but are important for carrying out polymerization of monolignols (peroxidases) and defense mechanism of plants (β glucosidase: family 1 Glycosyl hydrolase). Major phenylpropanoid pathway genes (C4H, 4-CL, CCoAOMT, CCR, Cald5H and CAD) were isolated using PCR based approach. Their 5’ and 3’ UTR determined by rapid amplification of cDNA race (RACE). We could isolate multiple isoforms of most of the genes in this way well supported by Southern hybridization experiment. All the genes were expressed in E. coli and/or yeast with/without the signal sequence. The over-expressed proteins were purified using suitable methods and were used for raising polyclonal antibodies against them. The most un-conserved region of each gene was cloned in antisense orientation in suitable binary vector and L. leucocephala and tobacco explants were transformed using the antisense construct to down-regulate the targeted gene. In order to increase the S/G ratio of lignin monomers sense construct of the target gene was used. We have also done RNAi based downregulation of Cinnamate 4-Hydroxylase (C4H), a key enzyme of phenylpropanoid pathway and a member of cytochrome P450 family in tobacco. Spatio-temporal expression of each gene was studied in L. leucocephala in different tissues at different periods of their growth. Kinetics study of some of the enzymes has been carried out in our lab. We are also trying to establish the structure function correlation of some enzymes. We have also isolated promoters of some phenylpropanoid pathway genes and have identified R2-R3 type MYB binding domain(s) in them. Two MYB genes have been isolated from L. leucocephala and heterologously expressed in Escherichia coli. Their DNA binding efficiency and role in regulating phenylpropanoid pathway remain to be seen. All the isolated genes shared 70-80% homology with the already reported sequences from other species at nucleotide level and more than 80% identity at amino acid level. Different isoforms of different genes had varying degree of identity between them ranging from 80% to more than 95%. We could easily locate the ribosome binding site in the 5’ UTR and the polyadenylation signal in the 3’ UTR in all the genes. Proteins were expressed in both prokaryotic and eukaryotic system. Some of the genes were difficult to express in BL21 (DE3), primarily because of the translational incompatibility of some of the codons in E. coli and may be partly because of the signal sequence present in most of the proteins. All the genes were found to be actively expressing in lignifying tissues and roots in comparison to leaves albeit a time dependent regular expression pattern could not be drawn in case of every gene. We used three methods of genetic transformation for transferring our gene constructs to L. leucocephala embryo viz: Agrobacterium mediatd, gene gun mediated and gene gun followed by cocultivation with Agrobacterium. The transformation and regeneration efficiency varied with each protocol. The transgenic plants invariably showed stunted vigour and slow growth irrespective of the nature of the gene downregulated or upregulated. Initial screening of the transformants was done on MS medium containing appropriate antibiotic and later confirmation was done using PCR with hptII/nptII, gus specific and CaMV35S promoter specific primers. At least one tobacco plant downregulated for C4H showed rudimentary root system and curled leaves with brown tip. Transformed Leucaena and tobacco plants had reduced lignin content with varying degree in case of every downregulated gene. Histochemical staining of transverse root and stem tissue sections showed reduced lignification as evidenced by immunocytolocalization patterns of the candidate protein under study. Promoters of few lignin biosynthetic pathway genes having R2R3 type MYB-binding signal sequences (AC elements) have been cloned. Two R2R3 type MYB transcription factors from L. leucocephala that have been expressed and purified from E. coli will be used for gel retardation studies with the promoter sequences. Also in vitro synthesized oligonucleotides having the highly conserved MYB-binding motifs will be designed to determine the most probable binding sites of the two MYB proteins. Sense construct for the two MYB genes have been transformed in tobacco and antisense construct have been transformed in Leucaena plants to study the after effects of gene manipulation. In short, we have isolated and characterized several genes belonging to phenylpropanoid pathway and have expressed them in different systems. Transgenics for down-regulation or upregulation of those genes have shown very interesting results.

Cell-specific and light-regulated expression of the beta-glucuronidase (GUS) reporter gene from maize cab-m1 and rbcS-m3 promoter sequences was studied in maize leaf segments by using an in situ transient expression microprojectile bombardment assay. The cab-m1 gene is known to be strongly photoregulated and to be expressed almost exclusively in mesophyll cells (MC) but not in bundle sheath cells (BSC). Expression of GUS from a 1026-base-pair 5' promoter fragment of cab-m1 is very low in dark-grown leaves; GUS expression is increased about 10-fold upon illumination of dark-grown leaves. In illuminated leaves, the ratio of GUS expression in MC vs. BSC is about 10:1. The cab-m1 region between 868 and 1026 base pairs 5' to the translation start confers strong MC-preferred expression on the remainder of the chimeric gene in illuminated leaves, but a region between -39 and -359 from the translation start is required for photoregulated expression. Transcripts of rbcS-m3 are found in BSC but not in MC and are about double in BSC of greening dark-grown seedlings. In contrast to the behavior of the cab-m1-GUS construct, GUS expression driven by 2.1 kilobase pairs of the rbcS-m3 5' region was about twice as high in MC as in BSC of unilluminated dark-grown maize leaves. The number of BSC, but not MC, expressing GUS nearly doubled upon greening of bombarded etiolated leaves. These data suggest that the 5' region of rbcS-m3 used here could be responsible for most of the light-dependent increase in rbcS-m3 transcripts observed in BSC of greening leaves and that transcriptional or posttranscriptional mechanisms are responsible for the lack of rbcS-m3 transcripts in MC.