Search

In dynamic driving simulators, the experience of operating a vehicle is reproduced by combining visual stimuli generated by graphical rendering with inertial stimuli generated by platform motion. Due to inherent limitations of the platform workspace, inertial stimulation is subject to shortcomings in the form of missing cues, false cues, and/or scaling errors, which negatively affect simulation fidelity. In the present study, we aim at quantifying the relative contribution of an active somatosensory stimulation to the perceived intensity of self-motion, relative to other sensory systems. Participants judged the intensity of longitudinal and lateral driving maneuvers in a dynamic driving simulator in passive driving conditions, with and without additional active somatosensory stimulation, as provided by an Active Seat (AS) and Active Belts (AB) integrated system (ASB). The results show that ASB enhances the perceived intensity of sustained decelerations, and increases the precision of acceleration perception overall. Our findings are consistent with models of perception, and indicate that active somatosensory stimulation can indeed be used to improve simulation fidelity., Intelligent Vehicles

Previous literature suggests a relationship between individual characteristics of motion perception and the peak frequency of motion sickness sensitivity. Here, we used well-established paradigms to relate motion perception and motion sickness on an individual level. We recruited 23 participants to complete a two-part experiment. In the first part, we determined individual velocity storage time constants from perceived rotation in response to Earth Vertical Axis Rotation (EVAR) and subjective vertical time constants from perceived tilt in response to centrifugation. The cross-over frequency for resolution of the gravito-inertial ambiguity was derived from our data using the Multi Sensory Observer Model (MSOM). In the second part of the experiment, we determined individual motion sickness frequency responses. Participants were exposed to 30-minute sinusoidal fore-aft motions at frequencies of 0.15, 0.2, 0.3, 0.4 and 0.5 Hz, with a peak amplitude of 2 m/s2 in five separate sessions, approximately 1 week apart. Sickness responses were recorded using both the MIsery SCale (MISC) with 30 s intervals, and the Motion Sickness Assessment Questionnaire (MSAQ) at the end of the motion exposure. The average velocity storage and subjective vertical time constants were 17.2 s (STD = 6.8 s) and 9.2 s (STD = 7.17 s). The average cross-over frequency was 0.21 Hz (STD = 0.10 Hz). At the group level, there was no significant effect of frequency on motion sickness. However, considerable individual variability was observed in frequency sensitivities, with some participants being particularly sensitive to the lowest frequencies, whereas others were most sensitive to intermediate or higher frequencies. The frequency of peak sensitivity did not correlate with the velocity storage time constant (r = 0.32, p = 0.26) or the subjective vertical time constant (r = − 0.37, p = 0.29). Our prediction of a significant correlation between cross-over frequency and frequency sensitivity, Intelligent Vehicles, Control & Simulation

Percepts of verticality are thought to be constructed as a weighted average of multisensory inputs, but the observed weights differ considerably between studies. In the present study, we evaluate whether this can be explained by differences in how visual, somatosensory and proprioceptive cues contribute to representations of the Head In Space (HIS) and Body In Space (BIS). Participants (10) were standing on a force plate on top of a motion platform while wearing a visualization device that allowed us to artificially tilt their visual surroundings. They were presented with (in)congruent combinations of visual, platform, and head tilt, and performed Rod & Frame Test (RFT) and Subjective Postural Vertical (SPV) tasks. We also recorded postural responses to evaluate the relation between perception and balance. The perception data shows that body tilt, head tilt, and visual tilt affect the HIS and BIS in both experimental tasks. For the RFT task, visual tilt induced considerable biases (≈ 10° for 36° visual tilt) in the direction of the vertical expressed in the visual scene; for the SPV task, participants also adjusted platform tilt to correct for illusory body tilt induced by the visual stimuli, but effects were much smaller (≈ 0.25°). Likewise, postural data from the SPV task indicate participants slightly shifted their weight to counteract visual tilt (0.3° for 36° visual tilt). The data reveal a striking dissociation of visual effects between the two tasks. We find that the data can be explained well using a model where percepts of the HIS and BIS are constructed from direct signals from head and body sensors, respectively, and indirect signals based on body and head signals but corrected for perceived neck tilt. These findings show that perception of the HIS and BIS derive from the same sensory signals, but see profoundly different weighting factors. We conclude that observations of different weightings between studies likely result from querying of distinct la, Intelligent Vehicles

The risk of motion sickness is considerably higher in autonomous vehicles than it is in human-operated vehicles. Their introduction will therefore require systems that mitigate motion sickness. We investigated whether this can be achieved by augmenting the vehicle interior with additional visualizations. Participants were immersed in motion simulations on a moving-base driving simulator, where they were backward-facing passengers of an autonomous vehicle. Using a Head-Mounted Display, they were presented either with a regular view from inside the vehicle, or with augmented views that offered additional cues on the vehicle's present motion or motion 500ms into the future, displayed on the vehicle's interior panels. In contrast to the hypotheses and other recent studies, no difference was found between conditions. The absence of differences between conditions suggests a ceiling effect: providing a regular view may limit motion sickness, but presentation of additional visual information beyond this does not further reduce sickness., Intelligent Vehicles

Illusory self-motion often provokes motion sickness, which is commonly explained in terms of an inter-sensory conflict that is not in accordance with previous experience. Here we address the influence of cognition in motion sickness and show that such a conflict is not provocative when the observer believes that the motion illusion is indeed actually occurring. Illusory self-motion and motion sickness were elicited in healthy human participants who were seated on a stationary rotary chair inside a rotating optokinetic drum. Participants knew that both chair and drum could rotate but were unaware of the actual motion stimulus. Results showed that motion sickness was correlated with the discrepancy between participants’ perceived self-motion and participants’ beliefs about the actual motion. Together with the general motion sickness susceptibility, this discrepancy accounted for 51% of the variance in motion sickness intensity. This finding sheds a new light on the causes of visually induced motion sickness and suggests that it is not governed by an inter-sensory conflict per se, but by beliefs concerning the actual self-motion. This cognitive influence provides a promising tool for the development of new countermeasures.

Despite gaining popularity, the use of Motion Cueing Algorithms (MCAs) based on Model Predictive Control (MPC) remains challenging due to the required tuning of a large number of cost function parameters. This paper investigates the effects of two critical MPC cost function parameters, the lateral specific force and roll rate error weights (Way and Wp), on the motion cueing quality achieved with an MPC-based MCA for a curve driving scenario. An offline sensitivity analysis, which quantified the effects of varying Way and Wp on the Root Mean Square Error (RMSE) and Pearson Correlation Coefficient (PCC) of the resulting simulator motion outputs, shows that for the same percentage-wise variation, Way has a more pronounced effect on both cueing quality predictors than Wp. In addition, for both RMSE and PCC, the effects of Way and Wp are also found to be largely independent, i.e., without interaction effects. This was further tested in a passive human-in-the-loop experiment with 20 participants and with nine different Way and Wp parameter combinations as test conditions, performed in the hexapod moving-base simulator of the Max Planck Institute for Biological Cybernetics in T¨ubingen. The collected continuous rating data, which were found to be reliable for 18/20 participants, show a statistically significant variation across all experiment conditions, and especially a strong interaction effect of Way and Wp. Somewhat surprisingly, the overall lowest continuous ratings were given to the combination of both reference weight settings from earlier research (our baseline condition). In line with the interaction effect in the continuous data, an extended post-experiment correlation analysis shows that a weighted combination of lateral specific force RMSE and and roll rate RMSE above the roll rate perception threshold strongly correlates (_ = 0.98) with the variation in mean continuous ratings across all experiment conditions. This approach can potentially be used for straight, Control & Simulation

In this paper the potential of Motion Incongruence Rating (MIR) models for the optimization of Motion Cueing Algorithms (MCAs) is investigated. In a human-in-the-loop simulator experiment, two optimization-based MCAs are compared for a roundabout scenario simulated on a medium-stroke hexapod simulator. The first MCA uses standard cueing error weights from reference literature in its cost function, while for the second case these weights were based on a MIR model fitted to previous experiment data. Results show that such models provide a promising cueing error weight estimation method for optimization-based MCAs, but also highlight the limitations of these models due to, for example, their dependency on the richness of the datasets to which they are fitted., Control & Simulation

This paper describes a driving simulation experiment, executed on the Daimler Driving Simulator (DDS), in which a filter-based and an optimization-based motion cueing algorithm (MCA) were compared using a newly developed motion cueing quality rating method. The goal of the comparison was to investigate whether optimization-based MCAs have, compared to filter-based approaches, the potential to improve the quality of motion simulations. The paper describes the two algorithms, discusses their strengths and weaknesses and describes the experimental methods and results. The MCAs were compared in an experiment where 18 participants rated the perceived motion mismatch, i.e., the perceived mismatch between the motion felt in the simulator and the motion one would expect from a drive in a real car. The results show that the quality of the motion cueing was rated better for the optimization-based MCA than for the filter-based MCA, indicating that there exists a potential to improve the quality of the motion simulation with optimization-based methods. Furthermore, it was shown that the rating method provides reliable and repeatable results within and between participants, which further establishes the utility of the method., Control & Simulation

Optimization-based motion cueing algorithms based on model predictive control have been recently implemented to reproduce the motion of a car within the limited workspace of a driving simulator. These algorithms require a reference of the future vehicle motion to compute a prediction of the system response. Assumptions regarding the future reference signals must be made in order to develop effective prediction strategies. However, it remains unclear how the prediction of future vehicle dynamics influences the quality of the motion cueing. In this study two prediction strategies are considered. Oracle: the ideal prediction strategy that knows exactly what the future reference is going to be. Constant: a prediction strategy that ignores every future change and keeps the current vehicle’s linear accelerations and angular velocities constant. The two prediction strategies are used to reproduce a sequence of maneuvers between 0 and 50 km/h. A comparative analysis is carried out to objectively evaluate the influence of the prediction strategies on motion cueing quality. Dedicated indicators of correlation, delay and absolute error are used to compare the effects of the adopted prediction on simulator motion. Also the motion cueing mechanisms adopted by the different conditions are analyzed, together with the usage of simulator workspace. While the constant strategy provided reasonable cueing quality, the results show that knowledge of the future vehicle trajectory reduces the delay and improves correlation with the reference trajectory, it allows the combined usage of different motion cueing mechanisms and increases the usage of workspace., Intelligent Vehicles, Control & Simulation

Spatial orientation relies on a representation of the position and orientation of the body relative to the surrounding environment. When navigating in the environment, this representation must be constantly updated taking into account the direction, speed, and amplitude of body motion. Visual information plays an important role in this updating process, notably via optical flow. Here, we systematically investigated how the size and the simulated portion of the field of view (FoV) affect perceived visual speed of human observers. We propose a computational model to account for the patterns of human data. This model is composed of hierarchical cells' layers that model the neural processing stages of the dorsal visual pathway. Specifically, we consider that the activity of the MT area is processed by populations of modeled MST cells that are sensitive to the differential components of the optical flow, thus producing selectivity for specific patterns of optical flow. Our results indicate that the proposed computational model is able to describe the experimental evidence and it could be used to predict expected biases of speed perception for conditions in which only some portions of the visual field are visible.