Search

We investigate the slip distribution of the 2008 May 12 Wenchuan M 7.9 earthquake using GPS data and InSAR measurements under a linear inversion scheme, with emphasis on the effect of three factors, including constraint on rake, different discretizations, and layered elastic model. Within our inversion parameterization context, we find the most influential factor would be constraint on rake. Without constraint on rake, the slip model seems physically wrong under the depth of 15 km, due to the limited depth resolution of the geodetic data used, especially the one orbit of InSAR measurements. Thus it is necessary to add a priori to the slip rake to obtain a reasonable fault source model. Different discretizations of the subfault patches have a notable impact on the slip distribution. Also, the layered elastic model predicts more slip at depth than does the half-space model, by about 15-20 per cent. The characteristics of slip distribution established through our inversions include some points as follows: (1) the most reliable results would be expected at depth range of 0-15 km; (2) three peak-slip asperities are inverted, at Yingxiu county (near epicentre), Yuejiashan county, and Beichuan county, respectively; (3) the inverted rake along the Yingxiu-Beichuan fault changes from dominantly thrusting motion at the southwest segments to dominant right-lateral or even pure right-lateral strike slip at the northeast segments, and (4) only thrust slip is occurred on the Guanxian-Jiangyou fault. [ABSTRACT FROM AUTHOR]

Investigating relationships between temporally- and spatially-related continental earthquakes is important for a better understanding of the crustal deformation, the mechanism of earthquake nucleation and occurrence, and the triggering effect between earthquakes. Here we utilize Global Positioning System (GPS) velocities before and after the 2008 Mw 7.9 Wenchuan earthquake to invert the fault coupling of the Longmenshan Fault (LMSF) and investigate the impact of the 2008 Mw 7.9 Wenchuan earthquake on the 2013 Mw 6.6 Lushan earthquake. The results indicate that, before the 2008 Mw 7.9 Wenchuan earthquake, fault segments were strongly coupled and locked at a depth of ~18 km along the central and northern LMSF. The seismic gap between the two earthquake rupture zones was only locked at a depth < 5 km. The southern LMSF was coupled at a depth of ~10 km. However, regions around the hypocenter of the 2013 Mw 6.6 Lushan earthquake were not coupled, with an average coupling coefficient ~0.3. After the 2008 Mw 7.9 Wenchuan earthquake, the central and northern LMSF, including part of the seismic gap, were decoupled, with an average coupling coefficient smaller than 0.2. The southern LMSF, however, was coupled to ~20 km depth. Regions around the hypocenter of the 2013 Mw 6.6 Lushan earthquake were also coupled. Moreover, by interpreting changes of the GPS velocities before and after the 2008 Mw 7.9 Wenchuan earthquake, we find that the upper crust of the eastern Tibet (i.e., the Bayan Har block), which was driven by the postseismic relaxation of the 2008 Mw 7.9 Wenchuan earthquake, thrust at an accelerating pace to the Sichuan block and result in enhanced compression and shear stress on the LMSF. Consequently, downdip coupling of the fault, together with the rapid accumulation of the elastic strain, lead to the occurrence of the 2013 Mw 6.6 Lushan earthquake. Finally, the quantity analysis on the seismic moment accumulated and released along the southern LMSF show that the 2013 Mw 6.6 Lushan earthquake should be defined as a “delayed” aftershock of the 2008 Mw 7.9 Wenchuan earthquake. The seismic risk is low along the seismic gap, but high on the unruptured southwesternmost area of the 2013 Mw 6.6 Lushan earthquake. [ABSTRACT FROM AUTHOR]