Search

• Large nanotubular TiO 2 photocatalytic membranes prepared by anodization. • Galvanostatic anodization improves the process over potentiostatic conditions. • Confirmed activity for photocatalytic methanol oxidation and E.coli inactivation. • Hybrid process proved synergism between filtration and photocatalysis. • Nanotubular TiO 2 do not significantly improve activity of nanoparticulate TiO 2. Hybrid photocatalysis/membrane processes constitute promising alternatives for water and wastewater treatment because they combine the efficiencies of filtration membranes technology and the oxidative effect of the photocatalytic process, increasing the lifetime of the membranes. The main challenge of these systems is the incorporation of the titanium dioxide (TiO 2) catalyst without altering the filtration properties of the membrane and the photocatalytic activity of the catalyst. One way to achieve this goal is generating the TiO 2 layer by direct anodization of titanium supports under controlled conditions to form titanium dioxide nanotubes (TiO 2 -NTs). This work reports the development of novel photocatalytic titanium membranes based on the formation of TiO 2 -NT arrays by anodization under both potentiostatic and galvanostatic conditions, and the scaling-up of the most promising systems to operational membrane photoreactors. The results demonstrated that the galvanostatic method displays more controlled tuneability to obtain NTs formation than the potentiostatic method on porous surfaces. However, despite the formation of TiO 2 -NTs structures, the observed photocatalytic activity is lower than that exhibited by TiO 2 nanoparticles deposited directly on the membrane, although in this case the transmembrane pressure is significantly higher, and therefore the operational pumping costs are greater. Synergistic effects of photocatalysis and microfiltration are clearly demonstrated in the application of the hybrid system to the removal of bacteria for water disinfection processes, showing a significant improvement in the inactivation of E. coli bacteria in water with respect to the bare membrane. [ABSTRACT FROM AUTHOR]

• Mechanistic modelling of E. coli inactivation by photo-Fenton at circumneutral pH. • Radiation transport considering optical properties of iron hydroxide precipitates. • Reversible serial n-event kinetic model successfully describes solar inactivation. • Photo-Fenton cycle mediated by precipitated iron reproduces photosaturation effect. • Multiple target – multiple hit model reproduces synergy of photons and radicals. This work focuses, for the first time, on the mechanistic modelling of wastewater disinfection by the solar photo-Fenton process using controlled solar simulated radiation. At circumneutral pH, iron precipitates forming hydroxides and significantly affecting the optical properties of the water. In this regard, radiation transfer in the reactor has been taken into account. The proposed model considers that the solar inactivation of bacteria follows a serial n-event mechanism with n reversible steps of photonic attacks leading to the bacterial inactivation. Dark Fenton cyclic process of hydroxyl radical formation from hydrogen peroxide is considered to be mediated mainly by precipitated iron species, prevailing at circumneutral pH. Finally, the photo-Fenton process was modelled using a multiple target – multiple hit mechanistic approach that accounts for the synergistic effect between the photonic and the hydroxyl radical attacks to the bacteria. Model predictions successfully reproduce experimental data of solar disinfection, hydrogen peroxide consumption, and photo-Fenton disinfection at circumneutral pH. [ABSTRACT FROM AUTHOR]

• Development of a numerical simulation model for SODIS processes in flow reactors. • Coupling of solar vector calculation with radiation field resolution. • Application of mechanistic kinetic model with explicit radiation absorption effect. • Validation of the model in a tubular photoreactor coupled with a CPC reflector. • Good prediction of experimental data under both simulated and natural sunlight. A novel procedure for the simulation of solar water disinfection (SODIS) processes in flow reactors is presented. The modeling approach includes the rigorous description of hydrodynamics, radiation transfer, mass transport and bacterial inactivation phenomena within the reactor by means of a computational fluid dynamics (CFD) software. The methodology has been evaluated in a tubular reactor coupled with a compound parabolic collector (CPC). Velocity profiles have been validated versus theoretical fully developed flow, and radiation fields versus both ray tracing and experimental actinometrical measurements. Incorporation of the solar vector calculation significantly improves the model capabilities for prediction of the potential performance of the SODIS process at different geographical coordinates and operation time. A mechanistic kinetic model was used for the description of the bacterial inactivation rate with explicit radiation absorption effects, coupling the radiation field with the mass balances of viable bacterial species. Model predictions successfully reproduce the experimental data of E. coli inactivation under different irradiances of both simulated and natural solar light with a normalized root mean squared logarithmic error (NRMSLE) of 6.65% and 9.72%, respectively. Therefore, this novel methodology is confirmed as a useful tool for the scaling-up of the SODIS process to large volume systems to be installed in remote communities where safe drinking water is not available. [ABSTRACT FROM AUTHOR]