Search

This paper introduces a new approach, based on faster-than-real-time (FTRT) analysis, to predict out-of-step (OOS) condition of a turbine-generator (T-G) unit subsequent to a fault scenario. The proposed FTRT analysis is based on 1) solving a state-space model of the T-G electromechanical system and corresponding controllers without the need for online measurements, and 2) an estimated Thevenin equivalent of the rest of the power system. The measurement-free FTRT analysis is carried out after the Thevenin parameters are estimated subsequent to the fault clearance instant. Equal area criterion is applied on the predicated variables to detect OOS condition. A reliable decision can be made based on this approach, since it does not involve simplifying assumptions contrary to the existing approaches. The FTRT approach accurately considers the impacts of the detailed model of the generator, automatic voltage regulator, prime mover, governor system, and the host power system. This paper provides detailed mathematical formulation for the proposed OOS detection method and verifies its feasibility and accuracy based on single machine and large test systems. The proposed approach is also implemented on an industrial platform and evaluated. The results confirm that the proposed approach can accurately identify OOS conditions, earlier than the rotor angle noticeably increases. [ABSTRACT FROM AUTHOR]

The excitation system of a synchronous generator has a major role in proper operation and control of the generator. Loss of excitation (LOE) may cause harmful effects on the both generator and power system. This paper presents a new approach to detect LOE based on calculating the synchronous generator internal voltage. This parameter is considerably sensitive to LOE and can be used as a straightforward index to discriminate LOE events from system disturbances more quickly and robustly than the conventional indices. A novel and practical technique with minimum computational burden is presented to calculate the generator internal voltage. To evaluate the proposed algorithm, LOE events in a multimachine test system are investigated. In addition, the proposed approach is experimentally evaluated on a 10 kVA synchronous generator. Performed studies demonstrate that the proposed strategy not only noticeably decreases the LOE relay operation time, but also desensitizes its maloperation to system disturbances. [ABSTRACT FROM PUBLISHER]

Load dynamics play an important role in the voltage stability. Grid-side short-circuit faults may induce severe voltage drops at motor load buses. Once the fault is cleared, depending upon its clearing time, the load bus voltage may either return to its permissible range or degrade gradually until it collapses. From the short-term voltage stability viewpoint, the former is a stable phenomenon, while the latter is an unstable circumstance and the load should be shed in order to prevent voltage instability from being spread over the grid. To cope with this problem, this study presents a new under-impedance load shedding (UILS) scheme. A quadratic distance relay is used as the load shedding element. The trajectory of load impedance is monitored by the proposed UILS relay. Following the grid-side fault clearance, if the impedance trajectory enters the load shedding zone and remains inside it for a predefined time, voltage instability is detected and the load is curtailed by the UILS relay. The proposed approach is tested on various networks, including a real power system model. The obtained results approve the efficiency of the proposed UILS scheme. [ABSTRACT FROM AUTHOR]

Load dynamics play an important role in the voltage stability. Grid‐side short‐circuit faults may induce severe voltage drops at motor load buses. Once the fault is cleared, depending upon its clearing time, the load bus voltage may either return to its permissible range or degrade gradually until it collapses. From the short‐term voltage stability viewpoint, the former is a stable phenomenon, while the latter is an unstable circumstance and the load should be shed in order to prevent voltage instability from being spread over the grid. To cope with this problem, this study presents a new under‐impedance load shedding (UILS) scheme. A quadratic distance relay is used as the load shedding element. The trajectory of load impedance is monitored by the proposed UILS relay. Following the grid‐side fault clearance, if the impedance trajectory enters the load shedding zone and remains inside it for a predefined time, voltage instability is detected and the load is curtailed by the UILS relay. The proposed approach is tested on various networks, including a real power system model. The obtained results approve the efficiency of the proposed UILS scheme. [ABSTRACT FROM AUTHOR]