Search

The lower limits of petrophysical properties for an effective reservoir are among the key parameters for assessing hydrocarbon reserves and are therefore directly related to hydrocarbon exploration and development strategies. However, the lower limits for marine sandstone gas reservoirs are still not clear and the impact factors also remain to be discussed. This study analysed the lower petrophysical property limits of an effective sandstone reservoir in the Qiongdongnan Basin using porosity, permeability and gas testing. The results showed that the lower porosity and permeability limits of effective reservoirs developed in the deltas are 8.9% and 1.2 × 10−3 μm2, respectively, and 11.3% and 4.0 × 10−3 μm2 in the submarine canyons and fans, respectively. Sedimentary facies, sediment transport distance, grain size and burial depth of sandstone significantly influence the lower physical property limits. The lower porosity and permeability limits increase with the increase in sediment transport distance as well as the decrease in sandstone grain size and burial depth. Sediment sources and sedimentary facies determine whether sandstone can become an effective reservoir in the Qiongdongnan Basin. Specifically, the sediment source dramatically influences the petrophysical properties of sandstone. The sandstone sourced from the Red River has higher porosity and permeability, followed by the sandstone sourced from the Hainan Uplift, and the sandstone sourced from the palaeo-uplift within the basin has the lowest porosity and permeability. The feldspar dissolution by CO2 and organic acid is the primary formation mechanism of the effective reservoir in the Lingshui Formation, whereas the dissolution of glauconite is more common in the sandstone reservoirs of the Sanya and Meishan formations. [ABSTRACT FROM AUTHOR]

The diagenetic evolution of sandstone is very complicated under the conditions of high temperatures and pressures in deep-water, deep-buried regimes, which have great influence on reservoir quality. This study investigates the typical reservoir target of Neogene deep-water, submarine-fan sandstones under high-temperature, high-pressure regimes in the Qiongdongnan Basin, South China Sea. Utilizing a thin section, scanning electron microscope (SEM), mineral geochemistry combined with burial history evolution, complex diagenetic events, and main controlling factors of the sandstone in the Neogene Meishan Formation were determined. The results show that the evolution of sandstone reservoirs is initially controlled by depositional framework compositions and subsequently modified by eogenetic and mesogenetic alterations during progressive burial. Eogenetic alterations mainly include the following: (1) mechanical compaction; (2) dissolution of feldspar; (3) low-Fe calcite cementation. Mesogenetic events were identified as the following: (1) dissolution of feldspar; (2) ferroan calcite and ankerite formation; (3) precipitation of quartz and clay mineral. Mechanical compaction is greatly influenced by the original depositional framework composition, and sandstone samples enriched in high contents of detrital clay matrix always experienced extensive mechanical compaction. Different phases of carbonate cement during different diagenetic regimes lead to continuous destruction on reservoir porosity. The dissolution of unstable feldspar minerals during eogenetic and mesogenetic environments leads to the development of secondary porosities and would enhance the quality of the reservoir. Overpressure formation is pervasively developed owing to early disequilibrium compaction and subsequent natural gas charging. Only well-sorted sandstones with low contents of detrital clay matrix could resist early mechanical compaction, lead to ample residual original porosities, and then undergo extensive mineral dissolution to generate sufficient secondary porosities. Subsequently, these porosities would be effectively protected by overpressure formation. Poor-sorted sandstones with high contents of detrital clay matrix would experience strong mechanical compaction and extensive destruction of original porosities. Thus, these sandstones are difficult to have significant dissolution and are unable to be effectively protected by overpressure formation. Therefore, the interplay between the original framework composition and the corresponding diagenetic pathways coupled with overpressure formation would result in strong reservoir heterogeneity for the deep-buried sandstones during progressive burial. [ABSTRACT FROM AUTHOR]

Deep-marine two-part strata consisting of a sand-rich basal part overlain sharply by a mud-rich upper part have been termed linked debrites, hybrid event beds, transitional flow deposits, and bipartite facies. In continental slope and proximal basin floor strata of the Neoproterozoic Windermere Supergroup (western North America) and distal basin-floor strata of the Ordovician Cloridorme Formation (eastern North America), bipartite facies form the middle of a depositional continuum hundreds of meters long consisting upflow of thick-bedded, matrix-poor sandstone (<20% detrital mud matrix) to thin-bedded, sandy mudstone (50%–90% mud matrix). This consistent lithofacies change is interpreted to reflect particle settling in a rapidly but systematically evolving, negligibly sheared sand-mud suspension developed along the margins (Windermere) and downflow terminus (Cloridorme) of a high-energy, mud-enriched avulsion jet. In both study areas, beds of similar lithofacies type succeed one another vertically and transform to the next facies in the depositional continuum at about the same along-strike position, forming stratal units two to nine beds thick whose grain-size distribution gradually decreases upward. This spatial and temporal regularity is interpreted to be caused by multiple surges of a single, progressively waning turbidity current, with sufficient lag between successive surges for the deposition of a traction-structured sandstone overlain by mudstone cap. Furthermore, the systematic back-stepping or side-stepping recognized at the stratal unit scale is interpreted to have been driven by a combination of knickpoint migration and local topographic steering of the flows, which continued until the supply of mud from local seafloor erosion became exhausted, the main channel avulsed elsewhere, or a new stratal element developed. [ABSTRACT FROM AUTHOR]

The Paleogene Shahejie and Dongying formations of the eastern Bohai Bay Basin contain >500 m fluvial-deltaic deposits and >600 m deltaic-lacustrine deposits, both of which are important for oil and gas exploration. This study aims to figure out the deposition system distribution within the sequence stratigraphy and predict the exploration target. Sequence boundaries are recognized by unconformities in the seismic profiles and abrupt changes in the well-logging curves (acoustic, spontaneous potential, natural gamma-ray and resistivity), and two second-order and five third-order sequences (SQs1, SQs3 in the Shahejie Formation and SQd1-SQd3 in Dongying Formation) are identified. Four types of depositional system and distribution are determined by well-logging profiles, cores, relative sand content and root-mean-square seismic attributes. The SQs3 sequence is predominantly fan deltas and lacustrine deposits, the SQs1 sequence is predominantly shallow lacustrine deposits, the SQd3 sequence is predominantly braided-river delta, semi-deep lacustrine, and turbidite fan, and the SQd2 sequence is predominantly braided-river delta deposits, whereas the SQd1 sequence is predominantly braided-river deposits. The controlling factors are determined by basin subsidence simulation and fossil data of biological palynology, indicating that tectonic activity is the main controlling factor in SQs3 and SQd3 while climate is the main controlling factor in the SQs1, SQd2 and SQd1 sequences. Combined with the physical properties of sandstone, it is concluded that the beach bar in the SQs1 sequence, turbidite fan in the SQs3 and SQd3 sequences, and thick sandstone in the SQd2 sequence are the important exploration targets. [ABSTRACT FROM AUTHOR]

Seismic, core, drilling, logging, and thin-section data are considered to analyze the reservoir diversity in the east, middle, and west fan of the Liushagang Formation in the steep-slope zone of the Weixinan Sag, Beibuwan Basin. Three factors primarily affect the reservoir differences for steep-slope systems: (1) Sedimentary factors mostly control reservoir scales and characteristics and the drainage system and microfacies. Massive high-quality reservoirs have shallow burial depths. Channel development and sediment supply favor the formation of these reservoirs. The sedimentary microfacies suggest fan delta plain distributary channels. (2) Lithofacies factors primarily control reservoir types and evolution. The diagenesis of high-quality reservoirs is weak, and a weak compaction–cementation diagenetic facies and medium compaction–dissolution diagenetic facies were developed. (3) Sandstone thickness factors primarily control the oil-bearing properties of reservoirs. The average porosity and permeability of high-quality reservoirs are large, the critical sandstone thickness is small, the average sandstone thickness is large, and the oil-bearing capacity is high. Furthermore, the reservoir prediction models are summarized as fan delta and nearshore subaqueous fan models. The high-quality reservoir of the fan delta model is in the fan delta plain, and the lithology is medium–coarse sandstone. The organic acid + meteoric freshwater two-stage dissolution is developed, various dissolved pores are formed, and a Type I reservoir is developed. The high-quality reservoir of the nearshore subaqueous fan model is in the middle fan, and the lithology is primarily medium–fine sandstone. Only organic acid dissolution, dissolution pores, and Type I–II reservoirs are developed. Regarding reservoir differences and models, the high-quality reservoir of the steep-slope system is shallow and large-scale, and the reservoir is a fan delta plain distributary channel microfacies. Weak diagenetic evolution, good physical properties, thick sandstone, and good oil-bearing properties developed a Type I reservoir. The study of reservoir control factors of the northern steep-slope zone was undertaken in order to guide high-quality reservoir predictions. Further, it provides a reference for high-quality reservoir distribution and a prediction model for the steep-slope system. [ABSTRACT FROM AUTHOR]

Deep‐water massive sandstones (DWMS) are characterized by large volumes of sand accumulations which are considered as potential reservoir intervals in deep‐marine environments. Lithological variations and bed thickness statistics are used to interpret the distribution of massive sandstones in a deep‐marine fan‐lobe system. These massive sandstones are interpreted based on lithological heterogeneities and detailed facies analysis in seventeen exposed sections of the Late Palaeogene deposits in Sabah, NW Borneo. Sedimentary logs containing details of lithology textures and structures were used to recognize nine sedimentary facies of DWMS. These lithofacies were then grouped into three sedimentary facies associations: (1) massive facies association with basal part of turbiditic Bouma sequence, (2) massive facies association having soft‐sediment deformation structures, and (3) massive facies association with erosional features. The facies analysis portrays inner to middle submarine fan deposition and was later applied to reconstruct the distribution of a channel‐lobe complex. Individual sandstone bed thicknesses vary from 1 m to more than 8 m and the number of massive sandstones in submarine lobes range from less than 10% to more than 50%. The thicknesses of massive sandstones in channels are more than 8 m, whereas distal lobes have thicknesses from 1–2 m only. These sandstones are concentrated in channels, proximal and medial lobe settings that can also be verified from calculating the average of all maximum thickness of massive sand intervals that is, 8.91 m. The lithological heterogeneities and the processes associated with the deposition of these massive sandstones are vital for potential hydrocarbon reservoirs in the deep‐marine environments around the globe. [ABSTRACT FROM AUTHOR]

The reservoir quality of sandstones is significantly impacted and transformed by sedimentation and diagenesis. It is necessary to clarify the internal relationship among them to precisely predict the sweet reservoir. In this study, five types of sedimentary microfacies are recognized through core observation and logging data: submerged distributary channel (fan delta), submerged interdistributary bay, submerged distributary channel (braided delta), distal bar, and turbidite fan. The major diagenetic processes, including compaction, cementation, and dissolution, have been analyzed based on petrography, scanning electron microscopy, and X-Ray diffraction. The dominant diagenetic cement includes calcite, smectite, kaolinite, illite, and I/S mixed-layer minerals, with small quantities of chlorite, pyrite, siderite, feldspar, and quartz cement. The reservoir quality is best in the submerged distributary channel (fan delta) sandstones, followed by submerged distributary channel (braided delta). Submerged interdistributary bay, distal bar, and turbidite fan are of poor reservoir quality. The grain size is the primary reservoir quality controlling factor, highly affected by sedimentary microfacies. Subsequent controls are diagenetic processes such as mechanical compaction, clay minerals formation, grain replacement, and dissolution that collectively influence the porosity and permeability. [ABSTRACT FROM AUTHOR]

The middle sub-member (Es3z) within the third member (Es3) of the Eocene Shahejie formation is the main source of the generation and accumulation of hydrocarbons in the lacustrine deltas of Bonan depression. Exploration and research work in different blocks is carried out separately. Types of sedimentary facies, and their vertical and lateral evolution in Es3z are not studied in detail. To fill this knowledge gap, we did a detailed analysis of facies and lithological characteristics through integrative studies of cores, well logs and seismic data. Identification of sedimentary structures and lithology of the reservoir zone from cores are calibrated with high-quality well logs and seismic data. Depositional facies in Es3z reservoirs are identified through analysis of sedimentary structures, grain size, log's trends and seismic sections. Es3z was deposited in the fan delta front setting where five facies associations are found, among them distributary channels consisting of MCS, CSg, PCSs, MS, RCL, WCS, PBSs, RCS and GBS lithofacies, natural levee containing DFs, and furthermore, sheet sand are associated to CBS and SSM lithofacies. GM, GGM and DGM lithofacies are related to inter-distributary deposits, whereas mouth bars consist of PLS, CS and CFS. Depositional history, flow direction of the sediments, and facies distribution are investigated through detailed facies mapping and cross-section profiling to show that the sediments were sourced from southeast to northwest. We found thicker succession of sedimentary profiles towards north and north-west directions. Belt distributary channel deposits, covering a wide range of areas, act as potential reservoirs along with mouth bar deposits, while mudstones in interdistributary channels act as a good source and seal rocks. The methodology adopted has great potential to explore the reservoirs of fan delta front in lacustrine deltas. [ABSTRACT FROM AUTHOR]

The Forties Sandstone Member is an important deep-water reservoir in the Central North Sea. The role of depositional characteristics, grain-coating clays, and diagenesis in controlling the reservoir quality of the sandstones is poorly understood. The main aim of the study is to understand the role of depositional characteristics, grain-coating and pore-filling clays, and diagenesis in controlling the reservoir quality evolution of turbidite-channel sandstones. The study employed a multi-disciplinary technique involving thin section petrography and scanning electron microscopy (SEM) to investigate the impact of grain size, clay matrix content, mode of occurrence of grain-coating chlorite and illite, and their impact in arresting quartz cementation and overall reservoir quality in the sandstones. Results of our study reveal that porosity evolution in the sandstones has been influenced by both primary depositional characteristics and diagenesis. Sandstones with coarser grain size and lower pore-filling clay content have the best reservoir porosity (up to 28%) compared to those with finer grain size and higher pore-filling clay content. Quartz cement volume decreases with increasing clay-coating coverage. Clay coating coverage of >40% is effective in arresting quartz cementation. Total clay volume of as low as 10% could have a deleterious impact on reservoir quality. The Forties Sandstone Member could potentially be a suitable candidate for physical and mineralogical storage of CO2. However, because of its high proportion (>20%) of chemically unstable minerals (feldspar, carbonates, and clays), their dissolution due to CO2 injection and storage could potentially increase reservoir permeability by an order of magnitude, thereby affecting the geomechanical and tensile strength of the sandstones. Therefore, an experimental study investigating the amount of CO2 to be injected (and at what pressure) is required to maintain and preserve borehole integrity. The findings of our study can be applied in other reservoirs with similar depositional environments to improve their reservoir quality prediction. [ABSTRACT FROM AUTHOR]

Hyperpycnites are extrabasinal turbidites related to hyperpycnal flows which form during river floods. Compared to intrabasinal turbidite systems in deep marine or lacustrine settings, hyperpycnites in shallow lakes settings are not understood. In this work, we studied the typical sedimentary characteristics of shallow lacustrine hyperpycnal flow deposits in outcrops of the Luanping Basin, Northeast China. Based on the sedimentary architecture and analysis of the facies associations in these outcrops, the hyperpycnites can be classified into the following three types: (a) bedload‐dominated erosional channel deposits, (b) bedload‐ and suspended‐load‐dominated channel‐to‐lobe transitional deposits, and (c) suspended‐load‐dominated lobe deposits. The erosional channels in proximal locations are filled by mud clasts, parallel‐laminated sandstones, massive sandstones, cross‐bedded sandstones, massive siltstones, and mudstones. The channel‐to‐lobe transitional deposits in a middle location are composed of parallel‐laminated sandstones, cross‐bedded sandstones, mud clasts near internal erosional surfaces, ripple cross‐bedded sandstones, massive siltstones, and mudstones. The lobe deposits in distal locations are composed of ripple cross‐bedded sandstones, massive siltstones, and mudstones. The sedimentary process of the shallow lacustrine hyperpycnal flows shows obvious response to periodic flood energy fluctuations. Gentle slope, small capacity of flood discharges and semiarid paleoclimate may be the possible reason for the observed sedimentary architecture of the shallow lacustrine hyperpycnal flow deposits. Therefore, this study offers new insights into the sedimentology of shallow lacustrine deposits in rift basins. [ABSTRACT FROM AUTHOR]

Sedimentological and petrographic studies of the Haymana Formation sandstones identify a submarine fan in the Haymana Basin. This study is confined to outcrop samples from the submarine-fan sandstones (the L1, L2, and L3 sections) and focuses on documentation of the petrographic characteristics of and depositional controls on reservoir properties of the Haymana Formation sandstones. Analysis of the lithology, texture, sedimentary structure, and petrography of the outcrop samples allows separation of the Haymana Formation sandstones into three distinct lithofacies, A, B, and C. Lithofacies A sandstones exhibit medium-coarse grain sizes (0.4–0.6 mm), moderate-good sorting, and subrounded grains. Lithofacies B sandstones exhibit fine grain sizes (0.2 mm), moderate sorting, and subrounded-subangular grains. Lithofacies C sandstones exhibit very fine grain sizes (0.112 mm) and nonreservoir facies. The main aim of this study is to document the diagenetic history and reservoir quality of the Haymana Formation sandstones. Lithofacies A has the best permeability, ranging from 80 to 120 mD, which can be related to the large grain size, the presence of cross-bedding, small amount of authigenic clays or cements in the pore throats, and enlarged pore apertures. In contrast, Lithofacies B sandstones contain variable yet small pore and pore-throat sizes, which are affected by abundant pore-filling authigenic clays, small grain sizes, and no dissolution. The permeability of the Lithofacies B sandstone ranges from 16 to 35 mD, which is lower than that of the Lithofacies A sandstone. Additionally, the Lithofacies B sandstones have small median pore-throat sizes (mean = 1.52 μm) and low porosities (average 4–6%), and the Lithofacies A sandstones have large pore-throat sizes (mean = 2.06–3 μm) and high porosities (average 20–25%), with most pore throats (50% or more) ranging between 1 and 4 μm. According to these data, the Lithofacies A sandstones show good reservoir characterisation. To date, significant hydrocarbon deposits have not been discovered in the Haymana Formation sandstones, although intensive exploratory work towards this end has been carried out in the Haymana Basin. According to this study, the proximal sandstones of the submarine-fan complex of the Haymana Formation may contain high-potential reservoirs in the Haymana Basin. In the basin, hydrocarbon is sourced from deep zones and may be capped by the proximal part of the Haymana Formation sandstones. According to this study, the Lithofacies B sandstones of the Haymana Formation are not suitable as diagenetic traps for hydrocarbon exploration in the Haymana Basin. However, the Lithofacies A sandstones may be expected to have the highest exploration success. [ABSTRACT FROM AUTHOR]

A recently discovered locality of the Katian age near Erfoud (Morocco) supports an assumption that at least some conulariids lived preferably in monospecific associations. Thousands of skeletons belonging to Archaeoconularia consobrina (Barrande, 1867) were documented in an extensive accumulation within a 20 cm thick calcareous sandstone bed containing also rounded intraclasts of fine-grained sediments. The specimens are well exposed on the top surface of the bed due to weathering. The specimens have the same prevailing orientation throughout the entire bed. The preservation and distribution patterns of these conulariids suggest a parautochthonous origin of the accumulation that was likely deposited after a single, high water-energy event, such as a storm or turbidite flow. The same taphonomic situation was recently described for Anaconularia anomala (Barrande, 1867) from a Sandbian site in the Czech Republic and for Archaeoconularia cf. consobrina (Barrande, 1867) in a different Sandbian site in Bohemia, Czech Republic. Thus, the monospecific conulariid assemblages with abundant specimens seem not to be exceptional. Such mass occurrences of conulariids are similar in (1) alignment of specimens along the pre­vailing current direction, (2) limited content of other faunal elements, and (3) the presence of intraclasts and the sandstone matrix. These taxa are interpreted as originally inhabiting an offshore environment below the storm wave base, with erected skeletons firmly attached to the sandy bottom at some calm places, or more probably deeply anchored in sand with the apical part (similar mode of life has recently been shown in fan mussels, which are often accompanied by algae forming sea meadows). During a single catastrophic event, conulariid skeletons were first broken off. This resulted in prevalence of the rounded schott ending in the apical region of the specimens. The apertural endings, including lappets, were destroyed during rapid transport prior to final de­position as aligned monospecific mass accumulations. It is worth noting that some localities, especially those in Morocco, yielded mass accumulations, with tests densely covered by diverse epibionts like brachiopods and edrioasteroids, while others are typified by undisturbed skeletons without attached epizoans or traces of attachment scars. All these taphonomic and palaeoecological aspects, as well as association with mass occurrences of algae, are subject to further study. [ABSTRACT FROM AUTHOR]

Distributive submarine fans contain channel-lobe elements that compensationally stack to build a radially dispersive map pattern. The middle parts of some submarine fans contain juxtapositions of channel elements and lobe elements due to longitudinal and lateral shifts in their channel-lobe transition zones. This article uses an exceptionally well-exposed three-dimensional outcrop of the Ross Sandstone at Bridges of Ross (Ireland) to document the stratigraphic and plan-view manifestation of lateral juxtapositions of channel elements and lobe elements in submarine fans. Observations made herein compare favorably to those in seafloor studies of Navy Submarine Fan (offshore southern California, USA) by William Normark and others, indicating that these systems can be used as paired outcrop-seafloor analogs for distributive fans in which the channel-lobe transition zones are located in longitudinally variable positions. In addition, data from Bridges of Ross and Navy Submarine Fan are integrated to constrain a geometric model that predicts the fractional length of a fan that contains lateral juxtapositions of channel elements and lobe elements. Lateral juxtapositions of channel elements and lobe elements are important because they enhance vertical and lateral connectivity within subsurface reservoirs. [ABSTRACT FROM AUTHOR]

A typical feature of the Precambrian complexes of the Kokshetau, Ishkeolmess, Erementau-Niyaz, and Aktau-Dzhungaria massifs of Northern and Central Kazakhstan is the presence of the end Mesoproterozoic-beginning of the Neoproterozoic quartzite-schist sequences in these sections. The lower and upper parts of these sequences are mostly composed of schists with interlayers of quartzites and marbles and of quartzitic sandstones, respectively. It is suggested that the quartzite-schist sequences represent the sub-platform cover of a large continental block and were formed in the regressive basin with widely abundant facies of submarine deltas and a littoral shoal. The presence of horizons and the lenses enriched in zircon-rutile heavy concentrate with the amount of accessory minerals of 10-70% characterizes the quartzite-schist sections of the Kokshetau and Erementau-Niyaz massifs. The U-Pb age of zircons from one such locality in the central part of the Erementau-Niyaz massif was analyzed by LA-ICP-MS. The Concordia ages of zircons are in the intervals 1041 ± 13-1519 ± 14, 1623 ± 14-1931 ± 14, and 2691 ± 14-2746 ± 14 Ma. One age was 2850 ± 14 Ma. The age distribution is characterized by clear peaks of 1.08, 1.20. 1.34, 1.46, 1.65, 1.89, and 2.70 Ga and weak peaks of 1.13 and 1.68 Ga. The age of the majority of zircons ranges from 1309 ± 14 to 1519 ± 14 Ma. Our data indicate that mostly Neoproterozoic rocks with a subordinate role of Paleoproterozoic and Neoarchean complexes served the feeding sources for the quartzite-schist sequence of the Erementau-Niyaz massif. The Mesoproterozoic and Paleoproterozoic events identified for the detrital zircons of the Erementau-Niyaz massif are completely manifested only in Laurentia. In the first approximation, these events coincide with the assembly and breakup of the Columbia/Nuna supercontinent (∼1650-1580 and 1450-1380 Ma) and assembly of the Rodinia supercontinent (1300-900 Ma). [ABSTRACT FROM AUTHOR]

Kilometer-scale sandstone intrusions—a recently recognized end member of the spectrum of soft-sediment deformation structures—are important components of many deep-water sandstone reservoirs. They result from the remobilization of considerable volumes of sand during early stages of burial. This paper uses three-dimensional seismic data, calibrated to nearby wells, to describe an extensive system of large downward-tapering conical sandstone intrusions from the Faeroe-Shetland Basin, on the UK Atlantic margin. The intrusions are derived from a middle Eocene submarine fan and are injected vertically upward through overlying, highly faulted claystones to form conical bodies that interconnect across the ∼700-m-thick claystone interval to feed a set of shallow intrusions located within a few hundred meters of the paleoseabed. The forcible intrusion of these shallow sandstone bodies produced complementary folding of the contemporaneous seabed. The subsequent onlap of these seabed domal folds took place immediately after the intrusion event, and by correlation to biostratigraphic data from nearby wells, we date these intrusions as late Miocene. This is the first time that both the age and emplacement depth range of a system of large-scale sandstone intrusions have been constrained. [ABSTRACT FROM AUTHOR]

The morphodynamics of supercritical density flows have a large impact on the dispersal of sediment and the resulting depositional architecture. Coarse-grained delta-foreset deposits represent ideal field examples of deposition by supercritical density flows on steep slopes. Field examples were studied in the Eocene Sant Llorenç del Munt fan-delta complex at the southeastern margin of the Ebro Foreland Basin (NE Spain). The fan-delta slope deposits, which are dominated by marlstones and fine-grained sandstones, include coarser-grained facies that indicate deposition by supercritical density flows. The formation of the perched lobes is interpreted as related to the expansion of supercritical density flows on the delta slope. Deposits of supercritical density flows form 2-4.5 m thick lobes, which are perched on the delta foreset. Lobes are bounded at the base and top by erosional surfaces that are characterized by long-wavelength geometries with irregularly spaced scours. Internally, the lobes are organized into 0.5-3 m thick lobe elements that pinch-out upslope and show backstepping stacking in dip sections and compensational stacking in strike sections. Lobe deposits include conglomerates, pebbly sandstones and sandstones and display lateral grain-size fining both in downflow direction and in across flow sections. Beds typically onlap the downslope dipping erosion surfaces at the base of a lobe or lobe element, respectively. Proximal lobe deposits are characterized by amalgamated scour fills, displaying backset cross-stratification or concentric stratification. Some scours are infilled by structureless sandstone or marlstone, containing pebble-sized clasts and large sandstone slabs derived from the underlying beds, and are commonly associated with laterally more extensive erosional surfaces. Amalgamated scours with backsets are interpreted as related to the occurrence of hydraulic jumps. Extensive scoured surfaces are interpreted as indicating phases of bypass. Downslope the scour fills pass into more sheet-like beds with sinusoidal or subhorizontal stratification, indicating deposition by antidunes. These antidune deposits dominate the more distal parts of the lobe deposits. [ABSTRACT FROM AUTHOR]