Search

Polysaccharides, due to their remarkable features, have gained significant prominence in the sustainable production of nanoparticles (NPs). High market demand and minimal production cost, compared to the chemically synthesised NPs, demonstrate a drive towards polysaccharide-based nanoparticles (PSNPs) benign to environment. Various approaches are used for the synthesis of PSNPs including cross-linking, polyelectrolyte complexation, and self-assembly. PSNPs have the potential to replace a wide diversity of chemical-based agents within the food, health, medical and pharmacy sectors. Nevertheless, the considerable challenges associated with optimising the characteristics of PSNPs to meet specific targeting applications are of utmost importance. This review provides a detailed compilation of recent accomplishments in the synthesis of PSNPs, the fundamental principles and critical factors that govern their rational fabrication, as well as various characterisation techniques. Noteworthy, the multiple use of PSNPs in different disciplines such as biomedical, cosmetics agrochemicals, energy storage, water detoxification, and food-related realms, is accounted in detail. Insights into the toxicological impacts of the PSNPs and their possible risks to human health are addressed, and efforts made in terms of PSNPs development and optimising strategies that allow for enhanced delivery are highlighted. Finally, limitations, potential drawbacks, market diffusion, economic viability and future possibilities for PSNPs to achieve widespread commercial use are also discussed., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

It is challenging work to develop a low-cost, efficient, and environmentally friendly Cr(VI) adsorbent for waste water treatment. In this paper, we used hemicelluloses from chemical fiber factory waste as the raw material, and prepared two kinds of carbon materials by the green hydrothermal method as adsorbent for Cr(VI). The results showed that hemicelluloses hydrothermally treated with citric acid (HTC) presented spherical shapes, and hemicelluloses hydrothermally treated with ammonia solution (HTC-NH 2 ) provided spongy structures. The adsorption capacity of the samples can be obtained by the Langmuir model, and the adsorption kinetics could be described by the pseudo-second-order model at pH 1.0. The maximum adsorption capacity of HTC-NH 2 in the Langmuir model is 74.60 mg/g, much higher than that of HTC (61.25 mg/g). The green hydrothermal treatment of biomass with ammonia solution will provide a simple and feasible way to prepare adsorbent for Cr(VI) in waste water treatment.

Aqueous suspensions of polysaccharide (cellulose, chitin or starch) nanocrystals can be prepared by acid hydrolysis of biomass. The main problem with their practical use is related to the homogeneous dispersion of these nanoparticles within a polymeric matrix. Water is the preferred processing medium. A new and interesting way for the processing of polysaccharide nanocrystals-based nanocomposites is their transformation into a co-continuous material through long chain surface chemical modification. It involves the surface chemical modification of the nanoparticles based on the use of grafting agents bearing a reactive end group and a long compatibilizing tail.

Preparations of arabinofuranosidase and xylanase, respectively from Aureobasidium pullulans and Trichoderma longibrachiatum, were used to remove selectively xylose and arabinose from kraft pulp. The equilibrium moisture content of pulps treated with both enzymes, at varying relative humidities, revealed a consistently lower percent moisture content at all humidity set points. Shorter fiber lengths indicated some deterioration when pulp was exposed to high concentrations of both enzymes.

LAM S5 is a polysulphated derivative of the glucan laminarian that inhibits basic fibroblast growth factor (bFGF) binding and the bFGF-stimulated proliferation of fetal bovine heart endothelial (FBHE) cells. This report demonstrates that LAM S5 has anti-angiogenic activity, as shown by inhibition of tubule formation by endothelial cells cultured on Matrigel and inhibition of vascularisation of the chick chorioallantoic membrane. In addition, LAM S5 caused a tumour growth delay of the murine RIF-1 tumour of 2.6 days (P = 0.01).

We have evaluated a series of laminarin sulphates with different degrees of sulphation (0.3-2.3) as antagonists of basic fibroblast growth factor (bFGF) and as inhibitors of the bFGF-dependent endothelial cell line FBHE. Inhibition of binding of bFGF by the laminarin sulphates increased with increasing degree of sulphation. Binding of bFGF to low affinity sites on BHK cells was inhibited more strongly than binding to high affinity sites. IC50 values for inhibition of binding to low and high affinity sites by the most highly sulphated laminarin sulphate (LAM S5; degree of sulphation 2.31) were 12 +/- 8 micrograms/ml and 69 +/- 66 micrograms/ml, respectively. LAM S5 dissociated bFGF from low affinity sites on BHK cells but not from high affinity sites. LAM S5 increased the electrophoretic mobility of bFGF indicating that LAM S5 binds directly to bFGF. LAM S5 reduced uptake of bFGF by FBHE cells by 67%. Increasing the degree of sulphation of laminarin sulphates increased the inhibition of bFGF-stimulated DNA synthesis of the endothelial cell line FBHE (IC50 for LAM S5 approx. 1 microgram/ml). There was no inhibition of DNA synthesis of FBHE cells by LAM S5 in the presence of 1 microgram/ml bFGF indicating that bFGF antagonism is involved in the anti-proliferative activity of this compound. LAM S5 may be of value against diseases associated with bFGF-dependent cell proliferation.

The transformation of modern industries towards enhanced sustainability is facilitated by green technologies that rely extensively on rare earth elements (REEs) such as cerium (Ce), neodymium (Nd), terbium (Tb), and lanthanum (La). The occurrence of productive mining sites, e.g., is limited, and production is often costly and environmentally harmful. As a consequence of increased utilization, REEs enter our ecosystem as industrial process water or wastewater and become highly diluted. Once diluted, they can hardly be recovered by conventional techniques, but using cyanobacterial biomass in a biosorption-based process is a promising eco-friendly approach. Cyanobacteria can produce extracellular polymeric substances (EPS) that show high affinity to metal cations. However, the adsorption of REEs by EPS has not been part of extensive research. Thus, we evaluated the role of EPS in the biosorption of Ce, Nd, Tb, and La for three terrestrial, heterocystous cyanobacterial strains. We cultivated them under N-limited and non-limited conditions and extracted their EPS for compositional analyses. Subsequently, we investigated the metal uptake of a) the extracted EPS, b) the biomass extracted from EPS, and c) the intact biomass with EPS by comparing the amount of sorbed REEs. Maximum adsorption capacities for the tested REEs of extracted EPS were 123.9–138.2 mg g−1 for Komarekiella sp. 89.12, 133.1–137.4 mg g−1 for Desmonostoc muscorum 90.03, and 103.5–129.3 mg g−1 for Nostoc sp. 20.02. A comparison of extracted biomass with intact biomass showed that 16% (Komarekiella sp. 89.12), 28% (Desmonostoc muscorum 90.03), and 41% (Nostoc sp. 20.02) of REE adsorption was due to the biosorption of the extracellular EPS. The glucose- rich EPS (15%–43% relative concentration) of all three strains grown under nitrogen-limited conditions showed significantly higher biosorption rates for all REEs. We also found a significantly higher maximum adsorption capacity of all REEs for the extracted EPS compared to cells without EPS and untreated biomass, highlighting the important role of the EPS as a binding site for REEs in the biosorption process. EPS from cyanobacteria could thus be used as efficient biosorbents in future applications for REE recycling, e.g., industrial process water and wastewater streams.