Search

Aims and Objectives: Nowadays, the material that offers the best sealing characteristic in the field of endodontic treatment is the mineral trioxide aggregate (MTA), nevertheless, this material necessities an adhesive bonding agent to perfectly join to the dental surface. The aim of this study was to analyze using a scanning electron microscope (SEM) the possible microgap between the adhesive, MTA, and the dental surface. Material and Methods: Fourteen extracted molars were divided into two groups - group A was prepared with MTA-component adhesive and group B was prepared with MTA and composite dual etching. The observations were carried out with a SEM Phenom G2 Pro mode S.E.I. JMP® software was used for statistical analysis, and a t-test was used for evaluating the difference between the two groups. Results: The gap of the areas at higher magnification (1000×) with a size greater than 5 microns in width and 20 microns in length were considered significant, and only group A recorded significant data. Conclusions: The SEM analysis performed in the group A with interposition of adhesive and flow between the dental pulp chamber and MTA demonstrates the presence of a marginal gap of considerable amplitude in the all of the samples investigated. Aims and Objectives: Nowadays, the material that offers the best sealing characteristic in the field of endodontic treatment is the mineral trioxide aggregate (MTA), nevertheless, this material necessities an adhesive bonding agent to perfectly join to the dental surface. The aim of this study was to analyze using a scanning electron microscope (SEM) the possible microgap between the adhesive, MTA, and the dental surface. Material and Methods: Fourteen extracted molars were divided into two groups - group A was prepared with MTA-component adhesive and group B was prepared with MTA and composite dual etching. The observations were carried out with a SEM Phenom G2 Pro mode S.E.I. JMP® software was used for statistical analysis, and a t-test was used for evaluating the difference between the two groups. Results: The gap of the areas at higher magnification (1000×) with a size greater than 5 microns in width and 20 microns in length were considered significant, and only group A recorded significant data. Conclusions: The SEM analysis performed in the group A with interposition of adhesive and flow between the dental pulp chamber and MTA demonstrates the presence of a marginal gap of considerable amplitude in the all of the samples investigated.

Aim: The aim of this study is to highlights possible differences in the volume of shaping and canal surface area after the using of common endodontic devices ProTaper Universal and WaveOne systems. Methods: Forty ISO 15, 0.02 taper, S-shaped endo-training Blocks (Dentsply, Maillefer) were assigned in two groups (n = 20 for each group). For each block the initial working length (WL) was evaluated with a 10 K-files (Dentsply Maillefer), so the glide path was created with PathFile 1, 2 and 3 (Dentsply Maillefer) at the WL. After that, simulated canals in the group 1 were shaped with S1, S2, F1 and F2 at WL; while in group 2 it was used single-file WaveOne primary in reciprocating motion. After shaping, the resin blocks were analysed with Skyscan 1172 scanner (Skyscan, Kontich, Belgium) and then volumetrically at a source voltage of 65 kV and a source current of 153 uA. Results: No statistically differences (P > 0.05) have been found in terms of volume and surface area after the use of ProTaper Universal and WaveOne systems. Conclusions: Although, results from micro-CT analysis revealed that Wave One result in a decrease of volume and surface area of shaping than ProTaper Universal, differences are not statistically significant.

Custom-cast posts and cores are usually used to treat endodontically treated teeth. However, several researches have underlined how these devices may be a much higher elastic modulus than the supporting dentine and the difference in the modulus could lead to stress concentrating in the cement lute, leading to failure. The role of the cement seems to play a fundamental role in order to transfer the strength during the chewing phases. Aim of this research is to record the rate of cytotoxicity of five different dual-cured resin cements used for fiber posts cementation. We tested the cytotoxicity of this five materials on MG63 osteoblast-like cells through two different methods: MTT ([3-4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide succinate) assay which tests for mito­chondrial enzyme activity6 and xCELLigence® system.