Search

The demanding material quality criteria in the automotive and aerospace industries have recently had an impact on the development of lightweight aluminium alloys. The choice and application of metal-matrix composites as structural materials in this context are known to offer a variety of benefits. These benefits include the ability to combine high elastic modulus, toughness, and impact resistance; minimum sensitivity to change in temperature or thermal shock; durability of the surface is good; moisture absorption leads to a potential issue while minimum exposure which leads to environmental degradation; and improved fabricability with conventional metalworking equipment. Aluminium metal matrix composites (AMMCs) are a potential material for advanced structural, aviation, aerospace, marine, and defense applications, as well as for the automotive sector and other related fields, due to their outstanding combination of qualities. The stir casting procedure is used to create an aluminium metal matrix composite (AMMC), which is the most efficient way to do so. In this study, the aluminium alloy 7075 is strengthened using neem leaf powder and SiC. The Vickers hardness examination method is used to govern the hardness of hybrid composites. Eventually, the mechanical and tribological properties of the composites were assessed, and their relationship to the composites' matching microstructure and wear was addressed. [ABSTRACT FROM AUTHOR]

The development of many engineered product applications for automobiles and aircraft parts has initiated the search for novel materials as alternatives to metal matrix composites (MMCs). Natural-fiber-reinforced polymer composites offer distinct advantages such as biodegradability, eco-friendliness, flexibility, low density, and higher specific strengths, etc. This study focuses on natural-fiber (hemp and banana)-fabric-reinforced polymer composites suitable for exterior-engineered parts. The hand lay-up process is used to fabricate these hybrid composites. Exterior-engineered products are highly susceptible to moisture, which can deteriorate their mechanical performances, including their tensile and flexural strength, thereby affecting the durability of the hybrid composites. Therefore, the hybrid composites are subjected to water absorption tests, where samples are immersed in distilled water for week-long intervals. After each interval, the water-absorbed specimens are tested for their tensile and flexural characteristics as per ASTM D-3039 and ASTM D-790, respectively. The moisture treatment had a notable impact on the composite materials, causing a slight decrease in the tensile strength by 2% due to the diminished lateral strength in the interlaminar fibers. Contrary to expectations, the flexural strength of the composites improved by 2.7% after the moisture treatment, highlighting the potential of the moisture treatment process to enhance the elastic properties of such composites. The dimensions of the specimens changed after the water immersion test, resulting in increased longitudinal and decreased lateral dimensions. The surface morphologies of the composite failure samples showed fiber delamination, fiber breakage, voids, and matrix fractures. [ABSTRACT FROM AUTHOR]

This review article focuses on the aluminum-based metal matrix composites (Al-based MMCs). Studies or investigations of their mechanical and tribological properties performed by researchers worldwide in the past are presented in detail. The processing techniques and applications for Al-based MMCs are also documented here. A brief background on the composite materials, their constituents, and their classification, as well as the different matrix materials and particulates used in Al-based MMCs, can be found in this review. Then, an overview of dual-particle-size reinforced composites, heat treatment of Al alloys, and temper designations used in heat treatment are also included. In addition, the factors influencing the mechanical and wear properties of Al-based MMCs are discussed. The primary objective is that both present and future researchers and investigators will be assisted by the comprehensive knowledge compiled in this article to further explore and work towards the betterment of society in general. [ABSTRACT FROM AUTHOR]

Increased material demand in all sectors is primarily due to exponential growth in population to fulfill human needs and comforts. Recycling of collected aluminium beverage cans and Al 6061 alloy scraps from industries ensures significant advantages in terms of energy savings with reduced environmental problems in fabricating composite parts economically. The iron oxide (α-Fe2O3) nanoparticles are prepared by precipitation method using ferric chloride and ammonia as a precursor. The prepared nanoparticles were characterized by using Transmission Electron Microscope (TEM), XRay Diffraction (XRD) and Fourier Transform Infrared (FTIR). Stir cast processing route ensures uniform mix of reinforcement nanoparticles in matrix material. The prepared nanocomposites (matrix: Al Scrap (90% Scrap Al 6061 alloy + 10% Waste Al can); reinforcement (Fe2O3): 2%, 4% and 6% wt. of Al matrix) are mechanically characterized for hardness and tensile strengths. It was observed that, increased percent of Fe2O3 nanoparticles in the metal matrix nanocomposite (MMCs) resulted in significant increase in hardness and tensile strength values. Fractography analysis examined viz. scanning electron microscope (SEM) revealed a ductile failure for as-cast Al scrap followed by brittle failure in Al MMC's. [ABSTRACT FROM AUTHOR]

The stringent demand to develop lightweight materials with enhanced properties suitable for various engineering applications is the focus of this research work. Industrial wastes such as fly ash (FA) and S-glass-fibres (GF) were used as reinforcement materials for high-strength alloy, i.e., Al 7005. Stir casting routes were employed for fabricating the four samples, Al 7005, Al 7005 + 5% GF, Al 7005 + 6% FA and Al 7005 + 5% GF + 6% FA. The extrusion process with different extrusion ratios (ER: 5.32:1, and 2.66:1) was used to examine the properties of all four samples. Extruded samples with ER: 5.32: 1 resulted in equiaxed grains with refined structure compared to stir casting parts. The effect of the extrusion process and the addition of reinforcements (GF and FA) on the gravimetric, electrochemical, and electrochemical impedance corrosion behaviour of Al 7005 composites in 1M HCl (Hydrochloric acid) solution were investigated. The results of all three corrosion methods showed that Al 7005 + 6% FA exhibited higher corrosion resistance. Corrosion rate of Al 7005, Al 7005 + 5% GF, Al 7005 + 6% FA and Al 7005 + 5% GF + 6% FA is found equal to 3.25, 2.41, 0.34, and 0.76 mpy, respectively. The FA particles remain inert and act as a physical barrier with corrosive media during the corrosion test. GF undergoes fibre degradation or disrupts the continuity of the glass network as a result of fibre leaching, which increases the corrosion rate in the sample. The gravimetric study showed that the corrosion rates decreased with an increase in extrusion ratio, which might be due to corrosion passivation increases and improved properties. The scanning electron microscopy reveals that corrosion fits, flakes and micro-cracks were observed more in the as-cast composites than that of extrusion composites, promoting the corrosion rate. [ABSTRACT FROM AUTHOR]