Search

• Elastic behavior of isotropic discrete models with an arbitrary geometry is analyzed. • An analytical estimation of the macroscopic elastic characteristics is derived. • It is shown that the widest limits of the Poisson's ratio are obtained for Voronoi and Power tessellation. • The Poisson's ratio limits cannot be further extended by manipulations with the model geometry. The use of discrete material representation in numerical models is advantageous due to the straightforward way it takes into account material heterogeneity and randomness, and the discrete and orientated nature of cracks. Unfortunately, it also restricts the macroscopic Poisson's ratio and therefore narrows its applicability. The paper studies the Poisson's ratio of a discrete model analytically. It derives theoretical limits for cases where the geometry of the model is completely arbitrary, but isotropic in the statistical sense. It is shown that the widest limits are obtained for models where normal directions of contacts between discrete units are parallel with the vectors connecting these units. Any deviation from parallelism causes the Poisson's ratio limits to shrink. A comparison of the derived equations to the results of the actual numerical model is presented. It shows relatively large deviations from the theory because the fundamental assumptions behind the theoretical derivations are largely violated in systems with complex geometry. The real shrinking of the Poisson's ratio limit is less severe compared to that which is theoretically derived. [ABSTRACT FROM AUTHOR]

• Mesoscale discrete model of concrete enhanced by spatially random material parameters. • Notched and unnotched three point bending and uniaxial tension are analyzed. • Fracture process zone statistically evaluated for various random field parameters. • Nontrivial dependence of peak loads on correlation length and variance is reported. • Local averaging and weakest-link are identified as the underlying mechanisms. Numerical simulations of concrete fracture performed with a probabilistic mesoscale discrete model are presented. The model represents a substantial part of material randomness by assigning random locations to the largest aggregates. The remaining part of randomness is introduced by causing material parameters to fluctuate randomly via a homogeneous random field. An extensive numerical study performed with the model considers prisms loaded in uniaxial tension with both fixed and rotating platens, and also beams with and without a notch loaded in three point bending. The results show the nontrivial effect of (i) autocorrelation length and (ii) variance of the random field on the fracture behavior of the model. Statistics of the peak load are presented as well as the size and shape of the fracture process zone at the moment when the maximum load is attained. Local averaging within the fracture process zone and weakest-link are identified as underlying mechanisms explaining the reported results. The companion paper, Part II (Vořechovský and Eliáš, 2020), introduces an analytical model capable of predicting the distribution of the peak load obtained with the probabilistic discrete model via the simple estimation of extremes of a random field obtained as moving average of local strength. [ABSTRACT FROM AUTHOR]

• Strength prediction of quasibrittle material that removes problems of Weibull theory. • Statistics of peak load are obtained analytically based on extremes of local averages. • Local averaging of Gaussian random field provides effective strength of material. • The weakest-link mechanics is incorporated via extremes of effective strength field. • Four model parameters are used to represent a wide range of random field parameters. The paper delivers an analytical model for prediction of the peak force in concrete specimens loaded in bending (both notched and unnotched). The model is capable of predicting peak force statistics by computing the extreme values of sliding averages of random strength fields. The local strength of the specimen is modeled by a stationary isotropic random field with Gaussian distribution and a given autocorrelation function. The averaging operation represents the progressive loss in material integrity and the associated stress redistribution that takes place prior to reaching the peak load. Once the (linear) averaging process is performed analytically, the resulting random field of averaged strength is assumed to represent a series of representative volume elements (RVEs) and the global strength is found by solving for the minimum of such an effective strength field. All these operations can be written analytically and there are only four model parameters: the three dimensions of the averaging volume (RVE) and the length of the final weakest-link chain. The model is verified using detailed numerical computations of notched and unnotched concrete beams simulated by mesoscale discrete simulations of concrete fracture performed with probabilistic distributions of model parameters. These are presented in the companion paper Part I (Eliáš and Vořechovský, 2020). The numerical model used for verification represents material randomness both by assigning random locations to the largest aggregates and by simulating random fluctuations of material parameters via a homogeneous random field. [ABSTRACT FROM AUTHOR]