Search

Film cooling is a commonly used thermal protection technology for turbine airfoils. However, due to the counter-rotating vortex pair (CVP) generated by the interaction between the cooling jet and the mainstream, the coolant gradually breaks away from the wall, which is particularly evident at high blowing ratios. For the sake of improving the film cooling effectiveness (FCE) under high inlet temperature conditions, a novel film cooling structure (SerrTrench-VSS) that combines serrated trench film holes with shark skin-inspired V-shaped surface (VSS) is proposed. The RANS method and realizable k - ε model are used for the simulations. The flow characteristics, adiabatic FCE, and resistance loss are analyzed in detail when the blowing ratio (BR) is 0.5–1.5 and then compared with the traditional cylindrical film hole and transverse trench film hole. In addition, the impact of VSS height on the cooling performance is investigated and the best height of the structure is determined. The results show that the SerrTrench-VSS has better FCE. The serrated trench can destroy the CVP and improve the spanwise spreading ability of the coolant. Also, the VSS can converge the cooling jet downstream of the film hole toward the centerline, thereby improving its extension ability along the flow direction. In the studied range of blowing ratio, the SerrTrench-VSS has the best FCE, and the spanwise-averaged FCE increases by up to 10.50% when BR = 0.5. The empirical correlations between the globally-averaged FCE and the height ratio within the range of the present study are also given. For the serrated trench, the cooling jet has the best spanwise spreading and flow extension ability when the VSS height is 0.5 D. The proposed novel film cooling structure (SerrTrench-VSS) can effectively improve the FCE and provide feasible means for the efficient cooling of a turbine blade under practical conditions. [Display omitted] • A V-shaped surface structure inspired by shark skin was proposed for film hole cooling. • It can concentrate the downstream cooling jet and inhibit the counter-rotating vortex pairs. • The best height of the V-shaped surface structure was determined. • The best cooling effectiveness can be obtained by combining a serrated trench with this structure. • The globally-averaged film cooling effectiveness and the height ratio were empirically correlated. [ABSTRACT FROM AUTHOR]

In this work, the influence of several lip structures on the effectiveness of film cooling and the flow fields of transverse trenched holes at different blowing ratios (BRs) ranging from 0.5 to 2.0 is numerically investigated, using the Reynolds averaged Navier Stokes method with the realizable k - ε turbulence model. The trenches include the traditional transverse trench, the bevel trenches, and the fillet trenches. It shows that the trenched holes produce weaker counter-rotating vortex pairs, which can enhance the effectiveness of film cooling compared with the standard cylindrical film hole. It demonstrates that the lip structures can improve the effectiveness of film cooling of the trenches at low BRs, but it has a negative effect at high BRs. It is found that the lower lip structures have less influence on the effectiveness of film cooling at different BRs than the upper lip structures. It is also found that the upper part of the fillet structure employs the Coanda effect to make the coolant flow close to the wall, thereby improving the effectiveness of film cooling; while the lower part of the fillet structure is conducive to converting the coolant flow into a vertical jet, thereby improving the effectiveness of film cooling at low BRs. [ABSTRACT FROM AUTHOR]