Search

Fracture criteria for prediction of extension of the interface crack and of the crack growth direction in a bimaterial consisting of a homogeneous and a functionally graded material (FGM) with systems of internal defects are studied. The bimaterial is subjected to a heat flux and a tensile load applied at infinity. It is assumed that the thermal properties of the FGM have exponential form. The Young’s modulus and Poisson’s ratio are assumed to be constant. In the previous papers (Petrova and Schmauder, 2011a,b, 2012a,b) asymptotic analytical formulas for the stress intensity factors (SIFs) at the interface crack tips were obtained as a series of a small parameter (the ratio between sizes of the internal and interface cracks). These SIFs are used in fracture criteria to obtain the possible direction of crack propagation and critical loads. The maximum circumferential stress criterion is used and some results for the fracture angles is obtained by the minimum strain energy density in order to compare the predictions for the fracture angles by two fracture criteria. The influence of geometry of the problem (location and orientation of cracks) and the parameters of non-homogeneity of FGMs on the main fracture characteristics is investigated. [ABSTRACT FROM AUTHOR]

Abstract: The work is devoted to the investigation of fracture processes in the vicinity of an interface crack in functionally graded/homogeneous bimaterials with internal defects subjected to tensile loading and a heat flux. A previously obtained solution () for the case of thermal loading on the same geometry is used as a part of the present solution. The solution is based on the integral equation method and it is assumed that thermal properties of the functionally graded material (FGM) possess exponential form. An asymptotic analytical solution is derived for a special case where an interface crack is larger than internal cracks in the FGM. The stress intensity factors are presented as asymptotic analytical functions of geometry of the problem and material properties. Analyses of the effects of the location and orientation of the cracks and the material non-homogeneity parameters on the stress intensity factors in FGM/homogeneous bimaterials is performed in the presence of thermal and mechanical loading. Examples of some FGM/homogeneous bimaterial are discussed. [Copyright &y& Elsevier]

Abstract: The work is devoted to mathematical modeling of the fracture processes in the vicinity of an interface crack in functionally graded/homogeneous bimaterials with internal defects subjected to a thermal flux. A previously obtained solution (Petrova and Schmauder, 2009, 2011) is used and supplemented with the additional possibility to take into account the crack closure. The solution is based on the integral equation method and it is assumed that thermal properties of the functionally graded material (FGM) have exponential form. For a special case where an interface crack length is much larger than the internal cracks in the FGM an asymptotic analytical solution of the problem is obtained as series of a small parameter (the ratio between sizes of the internal and interface cracks). Analyses of the effects of the location and orientation of the cracks, the material non-homogeneity parameters and the crack closure effects on the thermal stress intensity factors of the interface crack in FGM/homogeneous bimaterials are performed. Examples of some FGM/homogeneous bimaterial combinations (i.e., metal/metal, ceramic/metal) are discussed. [Copyright &y& Elsevier]

The adhesion properties of the TiAl/TiO2 interface are estimated in dependence on interfacial layer composition and contact configuration using the projector augmented wave method. It is shown that a higher value of the work of separation is obtained at the interface between the Ti-terminated TiAl(110) surface and the TiO2(110)O one than at that with the Al-terminated alloy. An analysis of structural and electronic factors dominating the chemical bonding at the interfaces is carried out. It is shown that low bond densities are responsible for low adhesion at both considered interfaces, which may affect the spallation of oxide scale from the TiAl matrix. [ABSTRACT FROM AUTHOR]

• Overview of the available results for Mode III interface crack problems is presented. • Mode III interface crack problem is posed using analytic functions of complex variable. • Closed form analytical solution for interface crack- microcrack interaction is presented. • Solutions for SIFs are discussed with respect to their dependency on bimaterial constants. An overview of the results for Mode III interface crack problems available in the literature, as well as those obtained by the authors, is presented in the paper. The analytical and semi-analytical solutions for the main fracture characteristics (i.e. stress intensity factors and energy release rates) are discussed with respect to their dependency on bimaterial constants. Detailed formulation for the antiplane shear problem for an interface crack interacting with internal cracks is presented using the methods of complex potentials and singular integral equations. Some particular solutions (e.g. for the problem of a singularity interacting with an interface and for the Mode III interface crack) are obtained, and these can serve as benchmark solutions or as parts of other similar problems. The approximate closed-form solution is derived for a special case of the interaction between the interface crack and internal micro-cracks. The resulting form of the solution for the stress intensity factors is rather simple and its structure is easily analyzed. A theoretical analysis of the explicit form of expressions for the stress intensity factors shows the conditions under which the solution for the interface crack depends on the bimaterial mismatch, and those under which it does not depend. This formula also allows to define the condition, when a small internal crack does not influence the stress intensity factor of the interface crack (i.e. invisible for the interface crack). [ABSTRACT FROM AUTHOR]

Co(0001)/TaC(01 2 ¯) interfaces with Re impurities are investigated using the plane-wave pseudopotential method within density functional theory. Two interface configurations and several interfacial sites for Re impurities are considered. The calculations reveal that Re doping can lead to more favourable interfaces with lower interface energies. It is shown that the decrease of interface energy can be understood from the electronic structure. Analyses of bond lengths, overlap populations, charge density distributions and densities of state demonstrate the importance of C-Co and C-Re bonds across the interface. Image 1 • Interfacial Re impurities increase interface strength. • Increased interface strength is mainly caused by strong C-Re covalent bonds. • Most favourable configuration of Co/TaC interface is changed by Re doping. [ABSTRACT FROM AUTHOR]