Search

This article describes a negative effect of size tolerance on the trigger characteristic. The trigger characteristic is the dependence of trigger force and trigger angle. An invalid trigger characteristic affects the accuracy of shooting and can be changed by not only proper choice of dimensions, but also the location of individual components. The paper shows an example of trigger mechanism that is designed as a Glock type mechanism. The solution for designers of small arms authors suggested the use of software MW. [ABSTRACT FROM AUTHOR]

The article describes the method of determination of limit velocity for the aluminium alloy sheet metal from the airplane fuselage skin hit by a pistol projectile of calibre 9 mm with utilisation of 2D FEM model of interaction between the projectile and the sheet metal. The simulations are based on accomplished firing experiments and results are compared. The results of simulation can be utilised for prediction of level of damage of aircraft fuselage in case of firing on board of the plane. [ABSTRACT FROM AUTHOR]

• Small and medium arms fire can be stopped with a snow-based protective structure. • Snow-filled commercial gabions can be efficiently constructed. • Structures can be construction at a rate of about 0.5 hr/m3 with common equipment. • Snow set-up time of 24 h is recommended. • All but one model of projectile penetration in snow matched our results within 32%. Small (5.56 mm, 7.62 mm and 9 mm) and medium (12.7 mm) arms rounds were fired at snow-filled 1.5m cubic gabions in a mid-winter condition in Fairbanks, Alaska. The rounds were excavated and penetration by each ammunition type was measured. A distribution and average of penetration depth was determined. All 320 rounds fired were captured within 1.5m after entering the snow barrier. Comparison with published models of ballistics penetration of snow showed mixed results with several matching our data within 10% and all but one within 32%. However, most of these models are simplistic in that they accommodate limited variables and therefore may not be expected to perform well in all settings. We conclude that snow-based ballistics protection structures can be quickly and efficiently erected in suitable environments and with minimal size, can provide reliable protection against small and medium arms fire. [ABSTRACT FROM AUTHOR]

The main motivation of this work is to clarify whether the hopes of significantly improving the performance of the conventional guns by using plasma ignition have a realistic basis. We assessed the possibility of improving the whole interior ballistic process, its repeatability and safety, through a uniform propellant ignition. In addition, we planed to improve the gun performance [the projectile muzzle energy (velocity)] by "forcing" "cold" charges to perform as "hot" ones (achieving "temperature compensation"). All of these goals are intended to be accomplished by using reasonable electrical energies (which would allow the reduction of the mass and volume of the power supply). We also avoided any significant changes in the conventional gun topography in order to prevent unacceptable costs. The presented research program proved that by using a standard 105-mm gun (concerning its barrel length and charge chamber volume) and a standard propellant, improved performances (more than 28% in the projectile muzzle energy) can be achieved while dense charges are used. In addition, significant reduction of the important effect, the "temperature gradient," is obtained. The capacity of plasma as the ignition factor to provide ballistic gain has also been demonstrated. [ABSTRACT FROM AUTHOR]

This paper is based upon the observation that, when a bullet is fired, it creates characteristic markings on the cartridge case and projectile. From these markings, over 30 different features can be distinguished, which, in combination, produce a ‘fingerprint’ for a firearm. By analyzing features within such a set of firearm fingerprints, it will be possible to identify not only the type and model of a firearm, but also each and every individual weapon just as effectively as human fingerprint identification. A new analytic system based on the fast Fourier transform for identifying projectile specimens by the line-scan imaging technique is proposed in this paper. This paper develops optical, photonic, and mechanical techniques to map the topography of the surfaces of forensic projectiles for the purpose of identification. Experiments discussed in this paper are performed on images acquired from 16 various weapons. Experimental results show that the proposed system can be used for firearm identification efficiently and precisely through digitizing and analyzing the fired projectiles specimens. [ABSTRACT FROM AUTHOR]

Presents information on a study which examined long-range ballistics to highlight the launch parameters of importance to electromagnetic gun designers. Atmospheric effects; Launcher energy limitations; Subcaliber projectiles; Conclusions.