Search

This study introduces a predictive auto‐reclosure scheme based on faster‐than‐real‐time (FTRT) analysis for synchronous generator type of distributed generation (DG) units to decrease DG oscillations after successful reclosure and also enhance transient stability margin of the unit after unsuccessful reclosure. The FTRT analysis, as a new concept for the protective relaying, represents a powerful predictive auto‐reclosure scheme which is based on a state‐space model of the DG unit. After a fault scenario and the first operation of the associated breaker, the FTRT analysis predicts energy level of the DG unit and determines an optimum dead‐time corresponding to the minimum energy level of the DG unit for reclosure that can provide an appropriate margin for transient stability. The effectiveness and accuracy of the proposed method are verified based on a test system. The results confirm that the proposed approach can effectively enhance transient stability for unsuccessful reclosure and reduce the corresponding oscillations after reclosure. [ABSTRACT FROM AUTHOR]

Here, an optimization framework is proposed for the service restoration (SR) problem in distribution networks based on mixed‐integer second‐order cone programming (MISOCP). The objective function is to minimize (i) curtailed loads, (ii) the number of switching operations, (iii) crew dispatching cost, and (iv) operational cost. A novel approach is developed for the optimal switching crew routing (SCR) to perform the manual switching operations in a short time. Self‐healing actions including (i) network reconfiguration, (ii) load shedding, (iii) adjusting the output power of the dispatchable distributed generations (DGs), and (iv) the optimal tap setting of the voltage regulation devices are adopted in the SR strategy. Both the voltage dependency and the uncertainty nature of loads are modelled. Besides, the switch failure scenario is considered in the proposed model to deal with real operating conditions. Hence, the developed optimization framework offers the most robust SR solution. The simulation studies are performed on an actual 87‐bus system in MATLAB/Yalmip environment by adopting Gurobi solver. The obtained results verify that the proposed model enhances quality of the solution in terms of SR process time compared to the other existing models. [ABSTRACT FROM AUTHOR]

Load dynamics play an important role in the voltage stability. Grid-side short-circuit faults may induce severe voltage drops at motor load buses. Once the fault is cleared, depending upon its clearing time, the load bus voltage may either return to its permissible range or degrade gradually until it collapses. From the short-term voltage stability viewpoint, the former is a stable phenomenon, while the latter is an unstable circumstance and the load should be shed in order to prevent voltage instability from being spread over the grid. To cope with this problem, this study presents a new under-impedance load shedding (UILS) scheme. A quadratic distance relay is used as the load shedding element. The trajectory of load impedance is monitored by the proposed UILS relay. Following the grid-side fault clearance, if the impedance trajectory enters the load shedding zone and remains inside it for a predefined time, voltage instability is detected and the load is curtailed by the UILS relay. The proposed approach is tested on various networks, including a real power system model. The obtained results approve the efficiency of the proposed UILS scheme. [ABSTRACT FROM AUTHOR]

Load dynamics play an important role in the voltage stability. Grid‐side short‐circuit faults may induce severe voltage drops at motor load buses. Once the fault is cleared, depending upon its clearing time, the load bus voltage may either return to its permissible range or degrade gradually until it collapses. From the short‐term voltage stability viewpoint, the former is a stable phenomenon, while the latter is an unstable circumstance and the load should be shed in order to prevent voltage instability from being spread over the grid. To cope with this problem, this study presents a new under‐impedance load shedding (UILS) scheme. A quadratic distance relay is used as the load shedding element. The trajectory of load impedance is monitored by the proposed UILS relay. Following the grid‐side fault clearance, if the impedance trajectory enters the load shedding zone and remains inside it for a predefined time, voltage instability is detected and the load is curtailed by the UILS relay. The proposed approach is tested on various networks, including a real power system model. The obtained results approve the efficiency of the proposed UILS scheme. [ABSTRACT FROM AUTHOR]