Search

In this paper, a novel six-mode loop antenna covering 660–1100, 1710–3020, 3370–3900, and 5150–5850 MHz has been proposed for the application of long-term evolution (LTE) including the coming LTE in unlicensed spectrum and LTE-Licensed Assisted Access. Loop antennas offer better user experience than conventional planar inverted-F antennas (PIFAs), inverted-F antennas (IFAs), and monopole antennas because of their unique balanced modes ( $1\lambda $ , $2\lambda , \ldots $ ). However, the bandwidth of loop antennas is usually narrower than that of PIFA/IFA and monopole antennas due to these balanced modes. To overcome this problem, a novel monopole/dipole parasitic element, which operates at an unbalanced monopole-like $0.25\lambda $ mode and a balanced dipole-like $0.5\lambda $ mode, is first proposed for loop antennas to cover more frequency bands. Benefiting from the balanced mode, the proposed parasitic element is promising to provide better user experience than conventional parasitic elements. To the best of the authors’ knowledge, the balanced mode for a parasitic element is reported for the first time. The proposed antenna is able to provide excellent user experience while solving the problem of limited bandwidth in loop antennas. To validate the concept, one prototype antenna with a size of $75 \times 10\times 5$ mm3 is designed, fabricated, and measured. Both simulations and experimental results are presented and discussed. Good performance is achieved. [ABSTRACT FROM AUTHOR]

A fold monopole/dipole/loop antenna offers unique advantages over a conventional Planar Inverted-F Antenna (PIFA) and monopole antenna for a mobile cellular device. Perhaps the most significant benefit is the fact that up to three resonant modes could be generated in a single continuous loop structure. In this paper, a novel hexa-band internal folded monopole/dipole/loop antenna has been proposed. The proposed antenna has four resonances in which three of them are 0.5\lambda, 1\lambda and 1.5\lambda modes. The distinctive feature of the antenna is an extra 2\lambda folded dipole mode, which has not been reported so far, is excited and utilized. All these four modes can be employed to cover the Low LTE700/GSM850/900 Band (LB: 698–960 MHz) and the High GSM1850/1900/UMTS2100 Band (HB: 1710–2170 MHz). The proposed loop antenna has been simulated, prototyped and tested. It is shown that the numerically simulated results are in close agreement with the experimental prototype results and proved that the antenna operates as proposed. [ABSTRACT FROM PUBLISHER]

This article proposes a novel design of the dual-band antenna pair. Starting from the single-band antenna pair composed of T-shaped monopole and T-shaped slot that are intersected with each other, orthogonal T-monopole and odd-symmetrical slot modes are excited. By adding symmetrical low-pass high-stop filters into the horizontal stub of the T-monopole and high-pass low-stop filters into the gap of the T-slot, an extra mode is introduced for each antenna, producing dual-band operation. Impedance bandwidths and radiation efficiencies of both bands can be adjusted flexibly using the filters. A detailed design guideline is given. The dual-band antenna pair operating at partial N78 (p-N78, 3.4~3.6 GHz) and partial N79 (p-N79, 4.8~4.9 GHz) is with a footprint of $15\times 6$ mm2. The measured results show that the average efficiencies are both −3.4 dB at p-N78/p-N79 for the odd-symmetrical slot and −2.8 dB/−3.7 dB at p-N78/p-N79 for the T-monopole, isolations are better than −16.8 dB at p-N78 and −11.8 dB at p-N79, and ECCs are lower than 0.1 at p-N78 and 0.2 at p-N79. The proposed dual-band antenna pair exhibits great potential to be applied in the fifth-generation (5G) multiple-input multiple-output (MIMO) terminal. [ABSTRACT FROM AUTHOR]

In this communication, the design procedure of a wideband antenna with omnidirectional radiation pattern is demonstrated based on the theory of characteristic modes. Consisting of a dipole and a loop antenna, the antenna has a very simple structure. A wide impedance bandwidth is obtained because of the simultaneous excitation of the antenna’s first two modes. Meanwhile, due to the fact that these two modes share a similar omnidirectional radiation pattern, a stable radiation pattern is also achieved across the operating frequency band. In order to identify the antenna’s different modes, a characteristic mode analysis of the antenna is carried out first. Then, a feed configuration is specifically designed to excite the desired modes. To validate the antenna design, a prototype was fabricated and tested. Measured results agree well with the simulated ones. Measurement shows that a wide impedance bandwidth of 44.2% with \vert \textS11\vert < -10 dB (1.85–2.9 GHz) and stable radiation patterns at both E-plane and H-plane were achieved over the operating frequency band. [ABSTRACT FROM PUBLISHER]

In this article, an endfire dual-polarized phased antenna array with small ground clearance is proposed for the fifth-generation (5G) millimeter-wave (mmW) applications with a wide bandwidth. In this array, each antenna element consists of a dipole fed by a microstrip line for horizontal polarization and an H-plane horn using substrate-integrated waveguide (SIW) for vertical polarization. To achieve a wide bandwidth for vertical polarization, two metal vias are added at the aperture of the horn antenna. Then, a four-element antenna array is designed by partially overlapping the aperture of each horn element. A prototype has been fabricated using multilayer printed circuit board (PCB) process. The measured results agree well with the simulated ones. The antenna is with an impedance bandwidth of $\vert \text{S}_{11}\vert < -10$ dB from 24.4 to 29.5 GHz for both polarizations. The maximum gains of vertical and horizontal polarizations are 9.16 and 9.27 dBi, with the scanning angle from −34° to 33° for both polarizations with gain deterioration less than 3 dB. The proposed antenna is a promising solution for 5G mmW cellphones or antenna-in-package applications. [ABSTRACT FROM AUTHOR]

In this article, a general decoupling method based on a new perspective of common mode (CM) and differential mode (DM) cancellation is proposed. For two closely spaced antennas, the mutual coupling effect can be analyzed and solved by exciting them simultaneously with in-phase (CM) and out-of-phase (DM) signals. It is theoretically proved that, if CM and DM impedances are the same, the mutual coupling effect between two separated antennas can be totally eliminated. Therefore, we can solve the coupling problem by CM and DM impedance analysis and exploit the unique field properties of characteristic modes to assist in antenna decoupling in a physical intuitive way. To validate the feasibility of this method, two practical design examples, including the decoupling between closely spaced dipole antennas and planar inverted-F antennas, are proposed. Both design examples have demonstrated that the proposed method can provide a systemic design guideline for antenna decoupling and achieve better decoupling performance compared to the conventional decoupling techniques. We forecast the proposed decoupling scheme, with a simplified decoupling procedure, has great potential for the applications of antenna arrays and multi-input multi-output (MIMO) systems. [ABSTRACT FROM AUTHOR]

A novel concept of antenna design, termed differential mode/common mode (DM/CM) design, is proposed to achieve a highly integrated multi-input multi-output (MIMO) antenna unit in mobile terminals. The inspiration comes from a dipole fed by a differential line which can be considered a DM feed. What will happen if the DM feed is transformed into a CM feed? Some interesting features are provided in this article. By symmetrically placing one DM antenna and one CM antenna together, a DM/CM antenna can be achieved. Benefitting from the coupling cancellation of antiphase currents and the different distributions of the radiation currents, a DM/CM antenna can obtain high isolation and complementary patterns, even if the radiators of the DM and CM antennas are overlapped. Therefore, good MIMO performance can be realized in a very compact volume. To validate the concept, a miniaturized DM/CM antenna unit is designed for mobile phones. The 24.2 dB isolation and complementary patterns are achieved in the dimension of $0.330 \lambda _{0} \times 0.058\lambda _{0} \times 0.019 \lambda _{0}$ at 3.5 GHz. One $8 \times 8$ MIMO antenna array is constructed by using four DM/CM antenna units and shows good overall performance. The proposed concept of DM/CM design may also be promising for other applications that need high isolation between closely packed antenna elements and wide-angle pattern coverage. [ABSTRACT FROM AUTHOR]