Search

This article focus on derive the process-structure-property relationship of Poly(L-lactide) (PLLA) fibers prepared by two-step melt spinning process. The spinning temperature, spinning rate, drawing temperature as well as draw ratio were studied to analyze the influence of process variables on the structure and properties of PLLA fibers. It suggests that the crystallinity, lamellar orientation structure and mechanical properties of fibers are dependent on the spinning conditions, including melt-spinning and hot-drawing process. An approximate linear correlation resulted between the orientation degree and tensile strength of PLLA fibers, which means that the oriented structure plays a dominant role to enhance PLLA fibers. PLLA fibers with high performance of 499 MPa and 5.30 GPa in tensile strength and Young's modulus separately have been realized by the selected spinning parameters. The results provide a theoretical direction for enhancing PLLA fibers by adjusting the structure characteristic via modifying the spinning parameters. [ABSTRACT FROM AUTHOR]

In this work, influence of matrix crystallization on the electrical conductivity and mechanical properties of poly( l -lactide)/multiwalled carbon nanotubes (PLLA/MWCNTs) nanocomposites has been investigated. By introducing trace amount of nucleating agent (0.15 wt%) and controlling isothermal crystallization time (0.1–8 min) of PLLA matrix in a hot mould (130 °C), the injection molded bars of the nanocomposites with different matrix crystallinities (5–45%) were prepared. Interestingly, the electrical conductivity is found to be linearly increased with increasing matrix crystallinity for nanocomposites with low concentrations of MWCNTs (below the percolation threshold). This could be attributed to the volume exclusion effect and the straightening effect of MWCNTs provided by PLLA crystallization, as evidenced from SEM observations. However, matrix crystallization induced reconstruction of MWCNTs network cannot effectively enhance the electrical conductivity when the concentration of MWCNTs is high enough (above the percolation threshold). More interestingly, the reconstructed MWCNTs network shows a better reinforcement effect in the nanocomposites as compared with that initially formed in the amorphous matrix. [ABSTRACT FROM AUTHOR]

Abstract: The effect of fabrication method on the properties of hierarchical 3D TiO2 nanostructures was investigated by employing and developing both hydrothermal method and calcination method to synthesize hierarchical 3D TiO2 nanorod spheres in this study. A comprehensive comparison in terms of morphologies, crystallization, specific surface areas, light absorption capabilities, and photoluminescence spectrum was conducted between 3D TiO2 nanorod spheres synthesized via hydrothermal method and that synthesized via calcination method. A better photocatalytic activity was demonstrated over the TiO2 nanorod spheres synthesized through calcination method. This was ascribed to the better crystallization and monodispersion of the hierarchical 3D TiO2 nanorod spheres resulted from the calcination method; thus rendering it with more superior characteristics such as larger specific surface area, enhanced light absorption capability and faster transfer of electrons which suppress the recombination of photogenerated electrons and holes. This study is thus significant not only in promoting the development of hierarchical 3D TiO2 nanorod spheres via different methods, but also in revealing the effect of fabrication method on the photocatalytic activity of hierarchical 3D TiO2 nanorod spheres. The calcination method is proposed to be a facile and promising method for scale-up production of the hierarchical 3D TiO2 nanorod spheres with high photocatalytic activity for efficient pollutants degradation. [Copyright &y& Elsevier]

Abstract: In this work, multi-walled carbon nanotubes were successfully chemically modified by maleic anhydride (f-MWCNTs), and the f-MWCNTs were melt compounded with poly(ethylene terephthalate) (PET) by using a twin-screw extruder to prepare nanocomposites. The effects of f-MWCNTs on the crystallization behavior of PET nanocomposites were studied via DSC and POM. The results show the apparent nucleation effect of f-MWCNTs in PET crystallization. The cold-crystallization peak temperature decreases with the increase of f-MWCNTs during the heating process. On the other hand, the addition of f-MWCNTs can greatly enhance the melt-crystallization peak temperature of PET when it is cooled from the melt. The nonisothermal crystallization kinetics of PET with f-MWCNTs was analyzed by different methods and the results also prove that the f-MWCNTs clearly accelerate the crystallization process of PET. [Copyright &y& Elsevier]