Search

The main advantage of green composites is their biodegradability, but this biodegradability can also be considered a drawback if the degradation appears during the service life of the component. Therefore, the study of the mechanical behavior of green composites after hygrothermal aging tests is necessary to analyze their degradation process. This study aims to comprehensively analyze the hygrothermal aging behavior and aging mechanism of flax-fiber-reinforced polylactic acid (PLA) biocomposites. The fully biodegradable composites are manufactured by compression molding. In addition, the influence of atmospheric-pressure plasma treatment on the mechanical properties of the biocomposite is studied. Specimens are exposed to water vapor and 40 °C environmental conditions in a stove for up to 42 days. Several specimens of each type are taken out at regular intervals and tested to examine the water absorption, mechanical properties, and thermal characterization. The results show that the stiffness was significantly reduced after 24 h due to matrix degradation, while the strength was reduced only after three weeks. [ABSTRACT FROM AUTHOR]

This work deals with fibrous biocomposites prepared by using nettle and poly(lactic acid) fibers and employing carding and compression-molding processes. The role of carding process in determining the tensile strength of the biocomposites was analyzed. The tensile, bending and impact properties of the biocomposites were found to increase initially with the increase of nettle fiber content till 50 wt% and decrease afterwards. The thermogravimetric analysis inferred that the thermal stability of the biocomposites increased with the increase of nettle fiber content. The dynamic mechanical analysis showed that the biocomposites exhibited high storage modulus, low loss modulus, and low damping factor. Further, the biocomposites exhibited excellent biodegradability and their biodegradability increased with the increase of nettle fiber content. Overall, the biocomposite prepared with equal weight proportion of nettle and poly(lactic acid) showed high potential for automotive dashboard panel application. [ABSTRACT FROM AUTHOR]