Search

In this paper, the effect of sodium butyl xanthate (NaBX) adsorption on the surface of bornite at different pH on flotation was studied by adsorption kinetic and thermodynamic. The flotation results demonstrated that the recovery was the highest when pH was 9 in NaBX solution (4×10−5 mol/L). The adsorption kinetics showed the reaction of NaBX on the bornite conformed to the second order kinetic equation; it belonged to the multimolecular layer adsorption of Freundlich model; the maximum adsorption rate constant was 0.30 g/(10−6 mol·min), and the equilibrium adsorption capacity was 2.70×10−6 mol/g. Thermodynamic calculation results indicated that the adsorption process was spontaneous chemisorption, and the adsorption products of NaBX on bornite surface were cupric butyl xanthate, ferric butyl xanthate and dixanthogen, which were confirmed by infrared spectrum measurements.

In this study, the hydrogenotrophic denitrifying bacterium Ochrobactrum anthropi was added in to the process of nitrate removal by starch-stabilized nanoscale zero valent iron (nZVI) to minimize undesirable ammonium. The ammonium control performance and cooperative mechanism of this combined process were investigated, and batch experiments were conducted to discuss the effects of starch-stabilized nZVI dose, biomass, and pH on nitrate reduction and ammonium control of this system. The combined system achieved satisfactory performance because the anaerobic iron corrosion process generates H2, which is used as an electron donor for the autohydrogenotrophic bacterium Ochrobactrum anthropi to achieve the autohydrogenotrophic denitrification process converting nitrate to N2. When starch-stabilized nZVI dose was increased from 0.5 to 2.0 g/L, nitrate reduction rate gradually increased, and ammonium yield also increased from 9.40 to 60.51 mg/L. Nitrate removal rate gradually decreased and ammonium yield decreased from 14.93 to 2.61 mg/L with initial OD600 increasing from 0.015 to 0.080. The abiotic Fe0 reduction process played a key role in nitrate removal in an acidic environment and generated large amounts of ammonium. Meanwhile, the nitrate removal rate decreased and ammonium yield also reduced in an alkaline environment.

The adhesion behavior between particles in the pulp will seriously affect the index of concentrate. In this paper, the effect of citric acid on chlorite in hematite reverse flotation system was studied. The flotation test and settlement test of artificial mixed ore showed that a lower dosage of citric acid could significantly improve the removal rate of chlorite. The mineral contact angle measurement and zeta potential analysis, combined with the extended DLVO theory showed that chlorite is easily adsorbed on the surface of hematite, results in a lower removal rate, and the phenomenon was analyzed by a laser particle size analyzer and optical microscope. The results showed that citric acid can reduce the apparent grain size of artificial mixed ore and improve the dispersion degree of pulp by changing the wettability and surface potential of the minerals, thus increased the removal rate of chlorite.