Search

As an emerging science, tissue engineering and regenerative medicine focus on developing materials to replace, restore or improve organs or tissues and enhancing the cellular capacity to proliferate, migrate and differentiate into different cell types and specific tissues. Renewable resources have been used to develop new materials, resulting in attempts to produce various environmentally friendly biomaterials. Poly (lactic acid) (PLA) is a biopolymer known to be biodegradable and it is produced from the fermentation of carbohydrates. PLA can be combined with other polymers to produce new biomaterials with suitable physicochemical properties for tissue engineering applications. Here, the advances in modified PLA as tissue engineering materials are discussed in light of its drawbacks, such as biological inertness, low cell adhesion, and low degradation rate, and the efforts conducted to address these challenges toward the design of new enhanced alternative biomaterials. [ABSTRACT FROM AUTHOR]

The increasing concerns about plastic pollution and climate change have encouraged research into bioderived and biodegradable materials. Much attention has been focused on nanocellulose due to its abundance, biodegradability, and excellent mechanical properties. Nanocellulose-based biocomposites are a viable option to fabricate functional and sustainable materials for important engineering applications. This review addresses the most recent advances in composites, with a particular focus on biopolymer matrices such as starch, chitosan, polylactic acid, and polyvinyl alcohol. Additionally, the effects of the processing methods, the influence of additives, and the outturn of nanocellulose surface modification on the biocomposite's properties are outlined in detail. Moreover, the change in the composites' morphological, mechanical, and other physiochemical properties due to reinforcement loading is reviewed. Further, mechanical strength, thermal resistance, and the oxygen–water vapor barrier properties are enhanced with the incorporation of nanocellulose into biopolymer matrices. Furthermore, the life cycle assessment of nanocellulose and composites were considered to analyze their environmental profile. The sustainability of this alternative material is compared through different preparation routes and options. [ABSTRACT FROM AUTHOR]

Fungal biomass (FB), a by-product of the fermentation processes produced in large volumes, is a promising biomaterial that can be incorporated into poly(lactic acid) (PLA) to develop enhanced biocomposites that fully comply with the biobased circular economy concept. The PLA/FB composites, with the addition of triethyl citrate (TEC) as a biobased plasticizer, were fabricated by a microcompounder at 150 °C followed by injection molding. The effects of FB (10 and 20 wt %) and TEC (5, 10, and 15 wt %) contents on the mechanical, thermal and surface properties of the biocomposites were analyzed by several techniques. The PLA/FB/TEC composites showed a rough surface in their fracture section. A progressive decrease in tensile strength and Young's modulus was observed with increasing FB and TEC, while elongation at break and impact strength started to increase. The neat PLA and biocomposite containing 10% FB and 15% TEC exhibited the lowest (3.84%) and highest (224%) elongation at break, respectively. For all blends containing FB, the glass transition, crystallization and melting temperatures were shifted toward lower values compared to the neat PLA. The incorporation of FB to PLA thus offers the possibility to overcome one of the main drawbacks of PLA, which is brittleness. [ABSTRACT FROM AUTHOR]

Disposable containers made of non-biodegradable polymers are considered as one of the most prevalent environmental pollutants. It is very important and desirable to make fully biodegradable disposable containers for food packaging that does not endanger the health of consumers. In this research, fully biodegradable polymer composites were prepared by melt mixing of polylactic acid (PLA), polybutylene succinate (PBS), and natural polymers including corn starch and wheat straw, and their physical and mechanical properties were evaluated. For this purpose, by conducting experiments according to the optimal custom mixture design of the response surface methodology, the effect of 3 independent variables including the concentration of the PLA and PBS biopolymers blend (50/50% w/w) (CBB) in the range of 30–70, the concentration of corn starch (CCS) in the range of 30–60 and the concentration of wheat straw (CWS) in the range of 0–8 wt percentage of biocomposite on the dependent variables including the elastic modulus (EM), elongation at break (EB), impact strength (IS) and equilibrium moisture content (EMC) of the biocomposite sheet were investigated. According to the results of this research, with the increase in the concentration of corn starch and wheat straw in the studied range, the EM and EMC of the biocomposite increased, while its EB and IS decreased. According to the results obtained from optimizing the effects of independent variables on the physicomechanical properties of the biocomposite sheet, the optimal values predicted by the models for CBB, CCS and CWS were 48.2 wt%, 45.4 wt%, and 6.4 wt%, respectively and predicted values for EM, EB, IS and EMC were 80.8 MPa, 11.4%, 2 kJ/m2 and 4.1%, respectively. Also, the biodegradability rate of the biocomposite with the optimal formulation was 71.1% in the fifth month of the test. • Biocomposites of biopolyester blend filled with two natural polymers were prepared. • Biocomposites contained polylactic acid, polybutylene succinate, starch, and wheat straw. • Constituents concentration had main effects on the sheet's physicomechanical properties. • Optimal sheet contains 48.2 wt% biopolyester blend and 51.8 wt% natural polymers. • The biocomposite sheet with optimal formulation had a high degree of biodegradability. [ABSTRACT FROM AUTHOR]

Over recent years, enthusiasm towards the manufacturing of biopolymers has attracted considerable attention due to the rising concern about depleting resources and worsening pollution. Among the biopolymers available in the world, polylactic acid (PLA) is one of the highest biopolymers produced globally and thus, making it suitable for product commercialisation. Therefore, the effectiveness of natural fibre reinforced PLA composite as an alternative material to substitute the non-renewable petroleum-based materials has been examined by researchers. The type of fibre used in fibre/matrix adhesion is very important because it influences the biocomposites' mechanical properties. Besides that, an outline of the present circumstance of natural fibre-reinforced PLA 3D printing, as well as its functions in 4D printing for applications of stimuli-responsive polymers were also discussed. This research paper aims to present the development and conducted studies on PLA-based natural fibre bio-composites over the last decade. This work reviews recent PLA-derived bio-composite research related to PLA synthesis and biodegradation, its properties, processes, challenges and prospects. [ABSTRACT FROM AUTHOR]