Search

Abstract This work deals with provision and characterization of the biopolymer-based composites achieved by incorporation of cellulose fibers as the reinforcement within the glycerol plasticized matrix formed by thermoplastic cornstarch biopolymer. The function of starch-based polymers is limited due to poor mechanical properties. However, it is improved with forming a biocomposite of thermoplastic starch (TPS) as matrix and the cellulose fibers (CF) as reinforcement. The surface of cellulose fibers is successfully modified using the air plasma treatment with the aim of improving the matrix/fiber adhesion. The modified fibers are studied using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The TPS/CF composites are prepared using high friction and hot compression procedure. Tensile test results and SEM images of the fracture surfaces show significant improvement of adhesion between treated cellulose fibers and TPS matrix. Thermogravimetric analysis shows a considerable decomposition at approximately 250–350 °C. XRD proved the significant increase in crystallinity percentage of composites compared to TPS. [ABSTRACT FROM AUTHOR]

Gelatin biocomposites were successfully manufactured by extrusion followed by injection. The employment of these industrial techniques, which have not been widely used in the case of biopolymers such as gelatins, represents an important advance for the development of gelatin-based biocomposites. Furthermore, the use of a non-enzymatic reaction to cross-link proteins provides a new approach to improve and control some functional properties, such as solubility and swelling. The addition of lactose in the formulations, as well as the heating of injected biocomposites, caused gelatin cross-linking, changing the protein structure towards the formation of pores and thus, solubility, density, and swelling decreased. Additionally, the cross-linked biocomposites showed good mechanical properties. [ABSTRACT FROM AUTHOR]

Abstract: In this work, a starch-based biopolymer was reinforced with flax strands. Composite materials at different fiber content were obtained by means of high-shearing mixing followed by injection molding processing. The evaluation of the mechanical properties gave a significant increase of the strength and stiffness of composites with the percentage of flax strands. The enhancement was analyzed in terms of compatibility and extension of the adhesion at fiber–matrix interface. The intrinsic mechanical properties of the reinforcement were measured and the behavior of the obtained composites was studied in terms of the modified rule of mixtures and the modified Halpin–Tsai equations. [Copyright &y& Elsevier]

Insect cuticle as a natural biocomposite includes many favored microstructures which have been refined over centuries and endow the cuticle eminent mechanical properties. This paper first studies the microstructures of chafer cuticle through SEM observations. Several peculiar fiber configurations and fiber-ply arrangements such as branched fiber, acanth-fiber and helicoid plies are observed. These microstructures are useful for man-made fiber-reinforced composites to improve their mechanical properties. Then, a special configuration of the branched fiber found in chafer cuticle is in details analyzed through a mechanical model and experimental verification. The pullout force of fibers as an index is firstly studied through parameter study. The factors, which can improve the pullout forces, are identified. Finally, the maximal pullout force of the branched fiber is experimentally tested and compared with that of plain straight fiber. It is proved that the maximal pullout force of branched fibers is obviously greater than that of the plain straight fibers. [Copyright &y& Elsevier]

Over recent years, enthusiasm towards the manufacturing of biopolymers has attracted considerable attention due to the rising concern about depleting resources and worsening pollution. Among the biopolymers available in the world, polylactic acid (PLA) is one of the highest biopolymers produced globally and thus, making it suitable for product commercialisation. Therefore, the effectiveness of natural fibre reinforced PLA composite as an alternative material to substitute the non-renewable petroleum-based materials has been examined by researchers. The type of fibre used in fibre/matrix adhesion is very important because it influences the biocomposites' mechanical properties. Besides that, an outline of the present circumstance of natural fibre-reinforced PLA 3D printing, as well as its functions in 4D printing for applications of stimuli-responsive polymers were also discussed. This research paper aims to present the development and conducted studies on PLA-based natural fibre bio-composites over the last decade. This work reviews recent PLA-derived bio-composite research related to PLA synthesis and biodegradation, its properties, processes, challenges and prospects. [ABSTRACT FROM AUTHOR]