Search

Paper has been used to engineer many types of bio-diagnostics. A major issue to most paper-based bio-diagnostics is the biomolecule instability causing the short shelf-life of the diagnostics. Commercial papers contain various polymeric additives. Polyamidoamine-epichlorohydrin (PAE), a polyelectrolyte typically used as wet-strength agent, is commonly used in filter papers and paper towels, which are often used as substrate in bioactive paper. However, the effect of cellulose or polymeric additives on antibody bioactivity is unknown. This limits paper optimization for diagnostic applications. In this study, model papers were made with and without PAE addition. IgM Anti-A blood typing antibody was physisorbed and dried on paper, aged for up to 9 weeks at different relative humidity (RH) conditions and the antibody activity was measured. The antibody bioactivity was represented as blood typing efficiency measured by image analysis. The surface chemical composition was measured using X-ray photoelectron spectroscopy (XPS). Antibody bioactivity loss was promoted by elevated RH, corresponding to increased paper water content. PAE significantly reduces the paper water content under ambient environment. Antibody bioactivity is higher on paper made with PAE under the high humidity conditions (57.6%–84.3% RH). However, under conditions of humidity saturation (100%RH), PAE shows little effect on reducing paper water content nor on protecting antibody bioactivity. These results demonstrate the water content of paper to be associated with antibody bioactivity loss. [ABSTRACT FROM AUTHOR]

Research into paper-based sensors or functional materials that can perform analytical functions with active recognition capabilities is rapidly expanding, and significant research effort has been made into the design and fabrication of bioactive paper at the biosensor level to detect potential health hazards. A key step in the fabrication of bioactive paper is the design of the experimental and operational procedures for the immobilization of biomolecules such as antibodies, enzymes, phages, cells, proteins, synthetic polymers and DNA aptamers on a suitably prepared paper membrane. The immobilization methods are concisely categorized into physical absorption, bioactive ink entrapment, bioaffinity attachment and covalent chemical bonding immobilization. Each method has individual immobilization characteristics. Although every biomolecule-paper combination has to be optimized before use, the bioactive ink entrapment method is the most commonly used approach owing to its general applicability and biocompatibility. Currently, there are four common applications of bioactive paper: (1) paper-based bioassay or paper-based analytical devices for sample conditioning; (2) counterfeiting and countertempering in the packaging and construction industries; (3) pathogen detection for food and water quality monitoring; and (4) deactivation of pathogenic bacteria using antimicrobial paper. This article reviews and compares the different biomolecule immobilization techniques and discusses current trends. Current, emerging and future applications of bioactive paper are also discussed. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Abstract: A novel method for the fabrication of paper-based microfluidic diagnostic devices is reported; it consists of selectively hydrophobizing paper using cellulose reactive hydrophobization agents. The hydrophilic–hydrophobic contrast of patterns so created has excellent ability to control capillary penetration of aqueous liquids in paper channels. Incorporating this idea with digital ink jet printing techniques, a new fabrication method of paper-based microfluidic devices is established. Ink jet printing can deliver biomolecules and indicator reagents with precision into the microfluidic patterns to form bio-chemical sensing zones within the device. This method thus allows the complete sensor, i.e. channel patterns and the detecting chemistries, to be fabricated only by two printing steps. This fabrication method can be scaled up and adapted to use high speed, high volume and low cost commercial printing technology. Sensors can be fabricated for specific tests, or they can be made as general devices to perform on-demand quantitative analytical tasks by incorporating the required detection chemistries for the required tasks. [Copyright &y& Elsevier]

Abstract: In this paper we deliver a report on the study of microbiological damage found on the pages of a 16th-century book. Our aim is to describe the procedures needed to ensure a conservative approach to the restoration of valuable books and objects of art made from, or supported on, paper. The techniques employed to evaluate and describe the damage observed, as well as the organisms responsible for biodeterioration, are discussed. A range of sampling techniques and instruments were utilised, including swabs and adhesive tape. Conventional methods, such as classic culturing and the direct microscopic observation of sampled material, were coupled with DNA-fingerprinting and phylogenetic analysis. We postulated that the purple stains which migrate through the pages with a felted consistency (Fig. 2), based on all the information obtained using traditional and molecular means, were caused by a cellulolytic fungus producing purple essudates, characterised by echinated conidia and Hülle cells. These elements were consistent with the discovery of both A. versicolor and A. nidulans using molecular techniques. [Copyright &y& Elsevier]