Search

In this paper, a modified laminated finite-element model based on subcell of unit cell and CDM material model was developed in nonlinear explicit finite-element code to investigate the dynamic response of 2D triaxial braided composite under ballistic impact of projectile. Six subcells, which were considered as laminate with different stacking sequences using solid elements, were employed to represent one unit cell of triaxial braided composites, therefore, the fiber-laying direction of braiding architecture is reproduced. In the prediction of the subcell model, an approximate round conical deformation area forms in the target and the failure modes are mainly longitudinal and transverse cracking due to tension. Compared with the continuum model, the subcell model is capable of analyzing the energy absorption of fiber in each direction. Although the failure modes are similar for both methods, the subcell model is more effective in prediction of impact wave propagation than the continuum model because it describes the fiber arrangement of triaxial braided composites. The developed subcell model will be an effective tool for the design process of carbon/epoxy composite fan casings. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a ballistic impact simulation of an armour-piercing projectile in hybrid ceramic/fiber reinforced composite armour. The armour is composed by an alumina plate and an ultra high molecular weight polyethylene composite. In order to model the armour behavior three different constitutive models were formulated and implemented into ABAQUS/Explicit finite element code. Comparisons between numerical predictions and experimental results in terms of damage shape/extent and V50 are also presented and discussed in the paper. [Copyright &y& Elsevier]

Highlights • Explicit FE analysis of ballistic impact on reinforced concrete panels. • RHT model is able to predict velocity and chip size for all type of projectiles. • Kinetic energies were mostly absorbed by the concrete panel. • None of the projectiles produced serious damages to the concrete panels. Abstract The resistance of concrete barriers to high velocity projectile impact from firearms is a research topic that has been of interest for quite some time, with the first known study going back to the mid-18th century. Despite this long history, only a very limited number of the test results are available in the public domain due to their sensitive nature and strategic importance. This situation has made the development of precise models for predicting the effects of ballistic impact difficult, despite the recent availability of highly refined and powerful calculation tools. Many researchers are still convinced that a validated methodology does not currently exist for this type of problem due to the number of uncertainties. Within this context, the objective of the present work is to study projectile impact on barriers made of reinforced concrete with explicit Finite Element (FE) simulations. In particular, this paper presents a FE analysis that considers the full range of projectile class as defined in the ballistic standards. Results from simulation are also compared with experiments. [ABSTRACT FROM AUTHOR]

This paper presents the computational-based ballistic limit of laminated metal panels comprised of high strength steel and aluminium alloy Al7075-T6 plate at different thickness combinations to necessitate the weight reduction of existing armour steel plate. The numerical models of monolithic configuration, double-layered configuration and triple-layered configuration were developed using a commercial explicit finite element code and were impacted by 7.62 mm armour piercing projectile at velocity range of 900 to 950 m/s. The ballistic performance of each configuration plate in terms of ballistic limit velocity, penetration process and permanent deformation was quantified and considered. It was found that the monolithic panel of high-strength steel has the best ballistic performance among all panels, yet it has not caused any weight reduction in existing armour plate. As the weight reduction was increased from 20-30%, the double-layered configuration panels became less resistance to ballistic impact where only at 20% and 23.2% of weight reduction panel could stop the 950m/s projectile. The triple-layered configuration panels with similar areal density performed much better where all panels subjected to 20-30% weight reductions successfully stopped the 950 m/s projectile. Thus, triple-layered configurations are interesting option in designing a protective structure without sacrificing the performance in achieving weight reduction. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents experimental and numerical investigations on ballistic impact behaviors of GLARE 5 fiber-metal laminated (FML) beams of various thicknesses. A high-speed camera was used to measure impact and residual/rebound velocities and also to assess damage evolution in the FMLs. The incident projectile impact velocity versus the residual velocity (VI –VR ) was plotted and numerically fitted according to the classical Lambert–Jonas equation for the determination of ballistic limit velocity, V 50. The results showed that the V 50 varied in a parabolic trend with respect to the metal volume fraction (MVF) and specimen thickness. The interfacial debonding as well as bending and stretching in aluminum layers played the significant roles in dissipating the impact energy in the GLARE 5 FML beams. The 3D finite element (FE) code, LS-DYNA, was used to model and validate the experimentally obtained results. Good agreement between experimental and numerical results was achieved. It was found that for a given specimen configuration, by increasing the projectile incident velocity up to its V 50, the maximum contact force increased. By further increasing the projectile velocity above its V 50, the maximum contact force was relatively invariant with respect to an increase in the projectile incident velocity. [Copyright &y& Elsevier]