Search

This article presents a dual-band closed-slot multiple-input multiple-output (MIMO) antenna for terminal wireless applications. By simply inserting additional slots between the closely spaced parallel-arranged radiation slots, the signal impedances of common mode (CM) and differential mode (DM) can achieve similar status, and the strong mutual coupling effect is then eliminated. The proposed slot antenna pair shows good isolation of better than 20 dB across the desired Wi-Fi bands. In addition to the one-wavelength slot antenna, flexible extension to a more compact half-wavelength slot pair is given for future industrial design (ID), which provides further validation of the method. We fabricate the $4\times4$ MIMO antenna system constituted by two sets of one-wavelength closed-slot pairs. The experimental results show that the proposed MIMO antenna can offer isolation of better than 18 dB, an envelope correlation coefficient (ECC) of lower than 0.1 between all ports, and a wide −3 dB efficiency bandwidths across the desired bands. The results confirm that the proposed antenna is a viable candidate for Wi-Fi communications inside routers. [ABSTRACT FROM AUTHOR]

To meet the demands of the new frequency bands and the $4\times 4$ multiple-input multiple-output (MIMO) specification brought by fifth generation (5G), a triple-band microstrip patch antenna and its four-antenna module are proposed. Based on the half-mode microstrip patch, the first three modes of TM1/2,0, TM1/2,1, and TM3/2,0 that can be independently tuned are engineered to cover the three Chinese 5G bands (N41/N78/N79). The proposed triple-band microstrip patch antenna with the volume of $33.5\times 32.5\times 4$ mm3 shows the −6 dB frequency bands of 2.47–2.75 GHz, 3.39–3.60 GHz, and 4.69–5.10 GHz, which makes a nice compromise between antenna volume and impedance bandwidths. Four such patches are arranged in a sequentially rotated style to constitute the triple-band four-antenna module, which is with the volume of $71\times 71\times 4$ mm3. Measured results of the module show high performance. The reflection coefficients of the four elements are almost identical: the bandwidths are 2.50–2.75 GHz, 3.41–3.62 GHz, and 4.68–5.01 GHz; all the isolations are better than −13.3 dB; the average total efficiencies of the four elements are between −1.41 and −1.11 dB, −2.45 and −2.10 dB, and −1.81 and −1.53 dB for N41, N78, and N79, respectively; and all the envelope correlation coefficients (ECCs) are lower than 0.07. [ABSTRACT FROM AUTHOR]

The huge proliferation of the antenna number brought by 5G greatly increases the pressure of the bezels of the 5G terminals. To release the pressure, planar four-antenna module with miniaturization and wideband performance that can be implemented on the back cover is proposed in this article. Four identical dual-mode PIFAs are arranged in a sequentially rotated style and the whole antenna appears in a circular shape. Each antenna element is a slotted quasi-quarter circle with one inner edge shorted and the other two edges left open, and it is coupled fed by an L-shaped microstrip line. A cross line that connects all the four elements together is used to improve the isolation of the neighboring elements. The four-antenna module covering N77 is with the diameter of 30.6 mm and height of 2 mm. The measured results show that for all the four antenna elements, the −6 dB impedance bandwidths cover 3.3–4.2 GHz, all the isolations are better than 9.7 dB, the average total efficiencies are between 36% and 40%, and envelope correlation coefficients (ECCs) are lower than 0.5. To the best of the authors’ knowledge, this is the smallest four-antenna module covering 3.3–4.2 GHz. [ABSTRACT FROM AUTHOR]

The mechanism for the radiation efficiency local minimum in antennas, especially for open-slot antennas and T-shaped antennas, has been investigated. It is found that the local minimum in those antennas always corresponds to an ideal differential mode. Furthermore, the frequency position of the ideal differential mode is decided by the parasitic parts of the antennas. Simple methods for estimating the local minimum position are proposed based on the mechanism we have found. In addition, the duality relation between those two types of antennas is also discussed. Our findings provide a guideline for designing mobile phone antennas with improved efficiency. [ABSTRACT FROM AUTHOR]