Search

Featured Application: The work shows the possibility of using genetic algorithms in ultrasound technology. The transfer function is an important parameter describing ultrasonic transducers which are designed to operate in various media. The typically high impedance of piezoelectric transducers is matched to a particular loading medium (gas, liquid, biological medium) by using multicomponent matching layers, which have specific impedances and thicknesses in accordance with the generally known matching criteria: Chebyshev, DeSilets or Souquet. When properly selected, the materials used for the matching layers allow the most optimal parameters to be obtained for both transmitting and the receiving ultrasonic energy. However, studies rarely focus on the possibility of shaping the obtained transfer function, which is also a parameter that is important in some applications of transducers intended for pulse operation, especially in liquid media (e.g., in hydroacoustics) or in biological media (e.g., in ultrasound imaging). The values and shapes of such a function are influenced by factors which are identical to the parameters describing the matching layers. This article presents the possibilities and advantages of using a genetic algorithm to shape the characteristics of the transfer functions that have a particular importance in the search for an optimal (typically the greatest) bandwidth of a transducer intended for operation in a particular medium. [ABSTRACT FROM AUTHOR]

One major problem in the design of ultrasonic transducers results from a huge impedance mismatch between piezoelectric ceramics and the loading medium (e.g. gaseous, liquid, and biological media). Solving this problem requires the use of a matching layer (or layers). Optimal selection of materials functioning as matching layers for piezoelectric transducers used in transmitting and receiving ultrasound waves strictly depends on the type of the medium receiving the ultrasound energy. Several methods allow optimal selection of materials used as matching layers. When using a single matching layer, its impedance can be calculated on the basis of the Chebyshev, DeSilets or Souquet criteria. In the general case, the typically applied methods use an analogy to a transmission line in order to calculate the transmission coefficient T. This paper presents an extension of transmission coefficient calculations with additional regard to the attenuation coefficients of particular layers. The transmission coefficient T is optimised on the basis of a genetic algorithm method. The obtained results indicate a significant divergence between the classical calculation methods and the genetic algorithm method. [ABSTRACT FROM AUTHOR]

In this paper, a method for estimating snow pressure reflection coefficient based on non-contact ultrasound examination is described. A constant frequency and air-coupled ultrasound pulses were used in this study, which incorporates a parametric method for reflected energy estimation. The experimental part was carried out in situ in the Antarctic, where the snow parameters were measured along with meteorological data. The proposed method represents a promising alternative for estimating the snow-water equivalent, since it uses a parametric approach, which does not require measurements of absolute values for acoustic pressure. [ABSTRACT FROM AUTHOR]