Search

Thermodynamic properties of polycrystalline powders of ruthenium dichalcogenides have been studied using calorimetric isobaric heat capacity measurements in a wide temperature range. The adiabatic and differential scanning calorimetry data for ruthenium disulfide and ruthenium diselenide have been used to determine standard thermodynamic functions (heat capacity, entropy, enthalpy increment, and reduced Gibbs energy) of these compounds in the range 10–965 K. At 298.15 K, the functions of RuS2 are as follows: = 60.82 ± 0.12 J/(K mol), S° = 56.05 ± 0.11 J/(K mol), Н°(298.15 K) − Н°(0) = 9.75 ± 0.02 kJ/mol, and Ф° = 23.34 ± 0.05 J/(K mol). For RuSe2, we have obtained = 69.96 ± 0.14 J/(K mol), S° = 80.62 ± 0.16 J/(K mol), Н°(298.15 K) − Н°(0) = 13.05 ± 0.03 kJ/mol, and Ф° = 36.85 ± 0.08 J/(K mol). The data obtained above 298 K have been used to determine empirical coefficients of the Maier–Kelley and Khodakovsky equations. The absolute entropies obtained in this study for the ruthenium dichalcogenides, in combination with literature data, have made it possible to evaluate the Gibbs energy of formation of RuS2(cr) and RuSe2(cr) at 298.15 K. [ABSTRACT FROM AUTHOR]

In this work, we present a comprehensive study of the thermodynamic properties of 3-and 4-ethoxyacetanilides. The heat capacities in crystalline, liquid, and supercooled liquid states from 80 to 475 K were obtained using adiabatic, differential scanning (DSC), and fast scanning (FSC) calorimetries. The fusion enthalpies at Tm were combined from DSC measurement results and the literature data. The fusion enthalpies at 298.15 K were evaluated in two independent ways: adjusted according to Kirchhoff's law of thermochemistry, and using Hess' law. For the latter approach, the enthalpies of the solution in DMF in crystalline and supercooled liquid states were derived. The values obtained by the two methods are consistent with each other. The standard thermodynamic functions (entropy, enthalpy, and Gibbs energy) between 80 and 470 K were calculated. [ABSTRACT FROM AUTHOR]

In this paper, we report the synthesis of crystalline ruthenium ditelluride (RuTe2) and its thermodynamic properties in the range from 10 to 965 K, evaluated from its isobaric heat capacity Cp determined using calorimetry. At low temperatures, between 6.86 and 335.11 K, the heat capacity of the synthesized material—pure, free of impurities and foreign phases—was determined by adiabatic calorimetry. In the range 315.3–965.3 K, Cp was determined by differential scanning calorimetry. The data obtained above 298 K have been used to determine empirical coefficients of the Maier–Kelley and Khodakovsky equations. In the range 10–965 K, we have evaluated the standard thermodynamic functions: heat capacity, entropy, enthalpy increment, and reduced Gibbs energy. At 298.15 K, we have obtained = 72.43 ± 0.14 J/(K mol), S° = 94.94 ± 0.19 J/(K mol), Н°(298.15 K) − Н°(0) = 14.60 ± 0.03 kJ/mol, and Ф° = 45.97 ± 0.09 J/(K mol). Using the absolute entropy determined by us and data in the literature and handbooks, we have estimated the standard Gibbs energy of formation of RuTe2: ΔfG°(RuTe2, cr, 298.15) = −130.5 ± 2.9 kJ/mol. [ABSTRACT FROM AUTHOR]

The functions of formation at T  = 298.15 K of calcium-ammonium nitrate decahydrate, 5Ca(NO 3 ) 2 ·NH 4 NO 3 ·10H 2 O, have been computed on the basis of experimental results obtained in this work. Single-phase crystalline calcium-ammonium nitrate decahydrate has been synthesized and checked by chemical analysis, thermogravimetry, differential scanning calorimetry, powder X-ray diffraction, and infrared spectroscopy. The enthalpy of dissolution of the decahydrate in water at T  = 298.15 K was measured in a sealed swinging calorimeter with an isothermal jacked. The low-temperature heat capacity of the solid has been measured by vacuum adiabatic calorimetry in the temperature range (7 to 338) K. The temperature, enthalpy, and entropy of fusion of the crystalline hydrate have been determined via differential scanning calorimetry at high pressure. A second-order solid-solid transition for the substance in the temperature range (300 to 330) K has been detected by methods of adiabatic calorimetry and differential scanning calorimetry. [ABSTRACT FROM AUTHOR]

The heat capacity of monoclinic gadolinium orthotantalate has been determined as a function of temperature by adiabatic and differential scanning calorimetry in the temperature range 8-1323 K. Smoothed heat capacity data have been used to calculate the thermodynamic functions of M-GdTaO with allowance for the contribution of its low-temperature magnetic transformations. [ABSTRACT FROM AUTHOR]