Search

Soft actuators with unique mechanics have gained significant interests for unique capabilities and versatile applications. However, their actuation mechanisms (usually driven by light, heat, or chemical reactions) result in long actuation times. Reported magnetically actuated soft actuators can produce rapid and precise motions, yet their complex manufacturing processes may constrain their range of applications. Here, the “bone-in-flesh” is proposed that constructs combining rigid magnetic structures encapsulated within soft polymers to create untethered magnetic soft actuators. This approach enables these soft, impact-resistant, agile actuators with a significantly simplified fabrication process. As demonstration examples, multiple soft actuators are fabricated and tested, including actuators for auxetic properties, 2D–3D transformations, and multi-stable states. As such, this work offers a promising solution to challenges associated with soft actuators to potentially expand their applications in various domains.

Soft robots have gained significant interest due to their high flexibility and adaptability to various working conditions. Recent advancements in engineering and innovative materials have enabled the design and production of sophisticated soft robotic systems with enhanced capabilities. This study aims to evaluate the fatigue behavior of bellow-type pneumatic soft actuators fabricated through fused filament fabrication (FFF) using thermoplastic polyurethane (TPU), compared to silicone rubber cast actuators. The actuators were equipped with resistive flex sensors to monitor bending motion, and fatigue tests were performed with cycles of inflation and deflation until failure. Results showed that 3D printed TPU actuators could withstand a significant number of cycles before failure, with an average of 6410 cycles at 3 bar pressure, compared to 3439 cycles at 1 bar pressure for the silicone actuators. The study identified a set of fabrication parameters that positively affect the durability of TPU actuators, providing valuable insights for replicating these results. Additionally, the study established a plausible range of utilization for 3D-printed FFF actuators in terms of the number of cycles they can endure, offering critical data for engineers and designers to make informed decisions about the design and application of these actuators in various practical scenarios. The findings demonstrate the potential of FFF for producing durable, long-lasting pneumatic soft actuators. [ABSTRACT FROM AUTHOR]

[Display omitted] • We proposed an SPA based on a Kresling-like pattern with a rigid skeleton by observing the cloning and moving behaviors from salps. • An extensible inserting structure is innovatively designed to replace the creases in traditional Kresling patterns. • The SPA can perform an axial contraction motion without twisting and a controllable bending motion. • The number of layers of Kresling-like patterns is changeable by adding or reducing skeleton components. • The elongation can reach to above 162% and the output force can reach to above 6.36 N. Biomimetic soft pneumatic actuators (SPA) with Kresling origami patterns have unique advantages over conventional rigid robots, owing to their adaptability and safety. Inspired by cloning and moving behaviors observed from salps, we proposed an SPA based on a Kresling-like pattern with a rigid skeleton. The elongation and output force were tested, and the effectiveness of the applications with the SPA was evaluated. The proposed SPA consists of rigid skeletons and a soft skin. The rigid skeletons are constructed using layers of Kresling-like patterns, while a novel extensible inserting structure is devised to replace the folds found in conventional Kresling patterns. This innovative approach ensures that the SPA exhibits axial contraction/expansion motion without any twisting movement. To mimic the bionic characteristics of swimming and ingesting progress of salps, the proposed SPA can perform an axial contraction motion without twisting and a controllable bending motion based on multi-layered Kresling-like patterns; to mimic the cloning and releasing life phenomena of salps, the number of layers of Kresling-like patterns is changeable by adding or reducing skeleton components according to the practical needs. The experimental elongation results on the SPA with multiple layers of Kresling-like patterns show that the elongation can increase to above 162% by adding layers; the experimental output force results show that the three-layer SPA can provide 6.36 N output force at an air flow rate of 10 L/min, and the output force will continue to increase as the number of layers of Kresling-like pattern increases or the air flow rate increases. Further, we demonstrate the applications of the SPA in soft grippers, scissor grippers, claw grippers and pipe crawlers. Our proposed SPA can avoid twisting in the radial contraction motion with high elongation and output force, and provide the practical guidance for bio-inspired soft robotic applications. [ABSTRACT FROM AUTHOR]

The present work demonstrates the manufacturing process of a pneumatic bellow actuator with an embedded sensor, utilizing a novel manufacturing approach through the complete use of additive manufacturing techniques, such as direct ink writing (DIW) and traditional fused deposition modeling (FDM) methods. This study is innovative in its integration of a dielectric electroactive polymer (DEAP) structure with sensing electrodes made of conductive carbon grease (CCG), showcasing a unique application of a 3D-printed DEAP with CCG electrodes for combined DEAP sensing and pneumatic actuation. Initial experiments, supported by computational simulations, evaluated the distinct functionality of the DEAP sensor by itself under various pressure conditions. The findings revealed a significant change in capacitance with applied pressure, validating the sensor's performance. After sensor validation, an additive manufacturing process for embedding the DEAP structure into a soft pneumatic actuator was created, exhibiting the system's capability for dual sensing and actuation, as the embedded sensor effectively responded to applied actuation pressure. This dual functionality represents an advancement in soft actuators, especially in applications that require integrated and responsive actuation and sensing capabilities. This work also represents a preliminary step in the development of a 3D-printed dual-modality actuator (pneumatic and electrically activated DEAP) with embedded sensing. [ABSTRACT FROM AUTHOR]

This study investigates the performance enhancement of mandrel-coiled twisted and coiled polymer fibers with a nichrome heater (TCPFLNR) by coating with a solution of graphene–mesoporous carbon–nickel–polyvinyl alcohol. The coating process involved a one-pot synthesis utilizing graphene powder, Ni nanoparticles, mesoporous carbon, and PVA as a binding agent. The coating was performed by manually shaking the TCPFLNR and the subsequent annealing process, which results in improved thermal conductivity and actuation behavior of the TCPFLNR. Experimental results on a 60 mm long actuator demonstrated significant enhancements in actuation displacement and actuation strain (20% to 42%) under various loads with an input current of 0.27 A/power 2.16 W. The blocked stress is ~10 MPa under this 2.16 W power input and the maximum strain is 48% at optimum load of 1.4 MPa. The observed actuation strain correlated directly with the input power. The coated TCPFLNR exhibited better thermal contacts, facilitating enhanced heat transfer, and reducing power consumption by 6% to 9% compared to non-coated actuators. It was found that the nanomaterial coating helps the TCP actuator to be reliable for more than 75,000 actuation cycles at 0.1 Hz in air due to improved thermal conductivity. These findings highlight the potential for further research to optimize electrothermally operated TCP actuators and unlock advancements in this field. [ABSTRACT FROM AUTHOR]

Soft robots present resilient and adaptable systems characterized by deformable bodies inspired by biological systems. In this paper, we comprehensively review existing design methods for soft robots. One unique feature of our review is that we first formulate criteria, which enables us to derive knowledge gaps and suggest future research directions to close these gaps and go further. Another distinctive feature of our review is that we pivot on the general engineering design process for soft robots. As such, we consider three criteria: (1) the availability of design requirements to start with the design of soft robots, (2) the availability of the so-called concept design or architecture design for soft robots, and (3) the systematic process that leads to the final design of soft robots. The review is conducted systematically, especially when searching for and selecting relevant publications in the literature. The main contribution of this review includes (i) identifying knowledge gaps and (ii) suggesting future research directions to close these gaps and go further. [ABSTRACT FROM AUTHOR]

This study introduces a novel modular soft actuator designed for an anthropomorphic robotic finger that addresses the need for adaptive behavior and precise joint-angle control. The key innovation is its modular design, which enables independent pressure regulation in each air chamber, thus achieving superior precision compared to traditional PneuNets soft actuators. A rigid skeleton is integrated to enhance force transmission and measurement capabilities and thus ensure effective force handling and transmission within each module. The versatility of the actuator is demonstrated through its adaptability in various scenarios, and its features include adaptive positional control achieved by modulating the inflation in each air chamber. This research includes kinematic and kinetostatic analyses to ensure precise control of joint angles and forces at the finger's endpoint. Experimental results confirm the actuator's excellent performance and adaptability, providing valuable insights for advancing soft-actuator technology. The findings suggest significant potential for this actuator in diverse applications, emphasizing its role in the future development of precise and adaptable robotic systems. [ABSTRACT FROM AUTHOR]

Lab-on-a-chip technology has been developed to streamline biochemical experiments by providing experimental environments in microscopic areas. Due to the difficulty of mixing chemicals in such small channels, various micromixers have been created. Our proposed sidewall-driven micromixer offers easy fabrication and precise control over mixing concentrations. In our previous study, we successfully generated concentration gradients by simultaneously mixing multiple chambers using a single actuator. However, it is not possible to mix different chemicals in each chamber. In this study, we developed a sidewall-driven micromixer that enables independent mixing in each chamber by installing one actuator per chamber. Experimental results showed that different conditions were achieved in each chamber using both microbead-mixture water and colored water. Thus, this mixer can be used to manipulate concentrations regardless of whether the mixing targets are particles or fluids. [ABSTRACT FROM AUTHOR]

Soft continuum robots, characterized by their dexterous and compliant nature, often face limitations due to buckling under small loads. This study explores the enhancement of axial performance in soft robots intrinsically actuated with extensile fluidic artificial muscles (EFAMs) through the incorporation of bio-inspired radial supports, or ossicles. By conducting quasi-static force response experiments under varying pressure conditions (103.4–517.1 kPa), and a modified Euler column buckling model, we demonstrate that ossicles significantly increase the robots' resistance to buckling, thereby extending their application scope in payload-carrying tasks. These findings not only underscore the effectiveness of ossicle reinforcement in improving structural robustness but also pave the way for future research to optimize soft robot design for enhanced performance. [ABSTRACT FROM AUTHOR]

Introduction: Biomimetic soft pneumatic actuators (SPA) with Kresling origami patterns have unique advantages over conventional rigid robots, owing to their adaptability and safety. Objectives: Inspired by cloning and moving behaviors observed from salps, we proposed an SPA based on a Kresling-like pattern with a rigid skeleton. The elongation and output force were tested, and the effectiveness of the applications with the SPA was evaluated. Methods: The proposed SPA consists of rigid skeletons and a soft skin. The rigid skeletons are constructed using layers of Kresling-like patterns, while a novel extensible inserting structure is devised to replace the folds found in conventional Kresling patterns. This innovative approach ensures that the SPA exhibits axial contraction/expansion motion without any twisting movement. To mimic the bionic characteristics of swimming and ingesting progress of salps, the proposed SPA can perform an axial contraction motion without twisting and a controllable bending motion based on multi-layered Kresling-like patterns; to mimic the cloning and releasing life phenomena of salps, the number of layers of Kresling-like patterns is changeable by adding or reducing skeleton components according to the practical needs. Results: The experimental elongation results on the SPA with multiple layers of Kresling-like patterns show that the elongation can increase to above 162% by adding layers; the experimental output force results show that the three-layer SPA can provide 6.36 N output force at an air flow rate of 10 L/min, and the output force will continue to increase as the number of layers of Kresling-like pattern increases or the air flow rate increases. Further, we demonstrate the applications of the SPA in soft grippers, scissor grippers, claw grippers and pipe crawlers. Conclusion: Our proposed SPA can avoid twisting in the radial contraction motion with high elongation and output force, and provide the practical guidance for bio-inspired soft robotic applications.

[Display omitted] The development of soft hydrogel actuators with outstanding mechanical properties, fast actuation speed, and available quantification of self-sensing actuation remains a challenging endeavor. In this work, dopamine-decorated polypyrrole nanofibers (DAPPy) were introduced into the polyethylene glycol diacrylate (PEGDA)-crosslinked poly(N-isopropyl acrylamide) network to generate a stretchable, NIR-responsive, and strain sensitive DAPPy/PNIPAM hydrogel layer. Besides, this active layer was combined with the passive ligninsulfonate sodium/polyacrylamide (LS/PAAM) to give DAPPy/PNIPAM//LS/PAAM bilayer hydrogel actuator, which exhibits ultrafast thermo-responsive actuation (19°/s) and underwater grasping and lifting performance. Moreover, the DAPPy/PNIPAM layer has excellent electrical conductivity (0.29 S/m) and thermal conversion ability (10.8 °C/min), which enable such a conductive hydrogel to act as a highly sensitive strain and temperature sensor with real-time resistance change in response to tensile strain (gauge factor up to 3.4), applied pressure, temperature, and remote NIR light irradiation. More importantly, the bilayer hydrogel actuator can integrate both actuation and self-sensing functions through the bending angle-surface temperature-relative resistance change relationship of the photothermal process. With excellent mechanical actuation and self-sensing ability, the resulting bilayer hydrogel showed a promising application potential as soft biomimetic actuating materials and soft intelligent actuators. [ABSTRACT FROM AUTHOR]

Abstract This study aims to analyze the convection flow of a self-propelled 1-pentanol droplet. The droplets move spontaneously when 1-pentanol droplets are dropped into an aqueous 1-pentanol solution. This self-propulsion is due to the interfacial tension gradient caused by the concentration differences. The shape of the droplet is closely related to its behavior because the shape of the droplet changes the interfacial tension gradient. In this study, an exoskeleton is used to fix the droplet shape. In our preliminary experiments, we observed Marangoni convection in droplets dropped in exoskeleton frames with boomerang and round holes. The results showed that a large difference in surface tension was necessary to control the self-propulsion of the 1-pentanol droplets. Herein, we prepared two exoskeletons with different holes, an elongated symmetrical elliptical shape, and an asymmetrical shape to fix the shape of the droplet. The droplets were then dropped into each exoskeleton, and the droplet behavior, Marangoni convection inside the droplet, and convection in the aqueous phase were analyzed. We found that the direction of the self-propulsion of the droplet was determined by these exoskeletons, particularly in the case of the asymmetrical exoskeleton, and the direction of self-propulsion was fixed in one direction. Marangoni convection was observed in the droplet from the direction of lower surface tension to that of higher surface tension. In the aqueous phase, two convections were generated from the aqueous phase to the droplet because of the diffusion of 1-pentanol. In particular, when an asymmetrical exoskeleton was used, two convections of different sizes and velocities were observed in the aqueous phase. Based on these experimental results, the relationship between droplet behavior and convection is discussed.

This study aims to analyze the convection flow of a self-propelled 1-pentanol droplet. The droplets move spontaneously when 1-pentanol droplets are dropped into an aqueous 1-pentanol solution. This self-propulsion is due to the interfacial tension gradient caused by the concentration differences. The shape of the droplet is closely related to its behavior because the shape of the droplet changes the interfacial tension gradient. In this study, an exoskeleton is used to fix the droplet shape. In our preliminary experiments, we observed Marangoni convection in droplets dropped in exoskeleton frames with boomerang and round holes. The results showed that a large difference in surface tension was necessary to control the self-propulsion of the 1-pentanol droplets. Herein, we prepared two exoskeletons with different holes, an elongated symmetrical elliptical shape, and an asymmetrical shape to fix the shape of the droplet. The droplets were then dropped into each exoskeleton, and the droplet behavior, Marangoni convection inside the droplet, and convection in the aqueous phase were analyzed. We found that the direction of the self-propulsion of the droplet was determined by these exoskeletons, particularly in the case of the asymmetrical exoskeleton, and the direction of self-propulsion was fixed in one direction. Marangoni convection was observed in the droplet from the direction of lower surface tension to that of higher surface tension. In the aqueous phase, two convections were generated from the aqueous phase to the droplet because of the diffusion of 1-pentanol. In particular, when an asymmetrical exoskeleton was used, two convections of different sizes and velocities were observed in the aqueous phase. Based on these experimental results, the relationship between droplet behavior and convection is discussed. [ABSTRACT FROM AUTHOR]

Soft robots, which are often considered safer than rigid robots when interacting with humans due to the reduced risk of injury, have found utility in various medical and industrial fields. Pneumatic artificial muscles (PAMs), one of the most widely used soft actuators, have proven their efficiency in numerous applications, including prosthetic and rehabilitation robots. PAMs are lightweight, responsive, precise, and capable of delivering a high force-to-weight ratio. Their structure comprises a flexible, inflatable membrane reinforced with fibrous twine and fitted with gas-sealing fittings. For the optimal design and integration of these into control systems, it is crucial to develop mathematical models that accurately represent their functioning mechanisms. This paper introduces a general concept of PAM's construction, its various types, and operational mechanisms, along with its key benefits and drawbacks, and also reviews the most common modeling techniques for PAM representation. Most models are grounded in PAM architecture, aiming to calculate the actuator's force across its full axis by correlating pressure, length, and other parameters that influence actuator strength. [ABSTRACT FROM AUTHOR]

Creatures in nature make extensive use of structural color adaptive camouflage to survive. Cholesteric liquid crystals, with nanostructures similar to those of natural organisms, can be combined with actuators to produce bright structural colors in response to a wide range of stimuli. Structural colors modulated by nano-helical structures can continuously and selectively reflect specific wavelengths of light, breaking the limit of colors recognizable by the human eye. In this review, the current state of research on cholesteric liquid crystal photonic actuators and their technological applications is presented. First, the basic concepts of cholesteric liquid crystals and their nanostructural modulation are outlined. Then, the cholesteric liquid crystal photonic actuators responding to different stimuli (mechanical, thermal, electrical, light, humidity, magnetic, pneumatic) are presented. This review describes the practical applications of cholesteric liquid crystal photonic actuators and summarizes the prospects for the development of these advanced structures as well as the challenges and their promising applications. [ABSTRACT FROM AUTHOR]

Traditional underwater rigid robots have some shortcomings that limit their applications in the ocean. In contrast, because of their inherent flexibility, soft robots, which have gained popularity recently, offer greater adaptability, efficiency, and safety than rigid robots. Among them, the soft actuator is the core component to power the soft robot. Here, we propose a class of soft electrohydraulic bending actuators suitable for underwater robots, which realize the bending motion of the actuator by squeezing the working liquid with an electric field. The actuator consists of a silicone rubber film, polydimethylsiloxane (PDMS) films, soft electrodes, silicone oils, an acrylic frame, and a soft flipper. When a square wave voltage is applied, the actuator can generate continuous flapping motions. By mimicking Haliclystus auricula, we designed an underwater robot based on six soft electrohydraulic bending actuators and constructed a mechanical model of the robot. Additionally, a high-voltage square wave circuit board was created to achieve the robot's untethered motions and remote control using a smart phone via WiFi. The test results show that 1 Hz was the robot's ideal driving frequency, and the maximum horizontal swimming speed of the robot was 7.3 mm/s. [ABSTRACT FROM AUTHOR]

Actuators based on soft elastomers offer significant advantages to the field of robotics, providing greater adaptability, improving collision resilience, and enabling shape‐morphing. Thus, soft fluidic actuators have seen an expansion in their fields of application. Closed‐cycle hydraulic systems are pressure agnostic, enabling their deployment in extremely high‐pressure conditions, such as deep‐sea environments. However, soft actuators have not been widely adopted on unmanned underwater vehicle control surfaces for deep‐sea exploration due to their unpredictable hydrodynamic behavior when camber‐morphing is applied. This study presents the design and characterization of a soft wing and investigates its feasibility for integration into an underwater glider. It is found that the morphing wing enables the glider to adjust the lift‐to‐drag ratio to adapt to different flow conditions. At the operational angle of attack of 12.5°, the lift‐to‐drag ratio ranges from −70% to +10% compared to a rigid version. Furthermore, it reduces the need for internal moving parts and increases maneuverability. The findings lay the groundwork for the real‐world deployment of soft robotic principles capable of outperforming existing rigid systems. With the herein‐described methods, soft morphing capabilities can be enabled on other vehicles. [ABSTRACT FROM AUTHOR]

Actuators utilizing snap‐through instabilities are widely investigated for high‐performance fast actuators and shape reconfigurable structures owing to their rapid response and limited reliance on continuous energy input. However, prevailing approaches typically involve a combination of multiple bistable actuator units and achieving multistability within a single actuator unit still remains an open challenge. Here, a soft actuator is presented that uses shape memory alloy (SMA) and mixed‐mode elastic instabilities to achieve intrinsically multistable shape reconfiguration. The multistable actuator unit consists of six stable states, including two pure bending states and four bend‐twist states. The actuator is composed of a pre‐stretched elastic membrane placed between two elastomeric frames embedded with SMA coils. By controlling the sequence and duration of SMA activation, the actuator is capable of rapid transition between all six stable states within hundreds of milliseconds. Principles of energy minimization are used to identify actuation sequences for various types of stable state transitions. Bending and twisting angles corresponding to various prestretch ratios are recorded based on parameterizations of the actuator's geometry. To demonstrate its application in practical conditions, the multistable actuator is used to perform visual inspection in a confined space, light source tracking during photovoltaic energy harvesting, and agile crawling. [ABSTRACT FROM AUTHOR]

This paper introduces a soft, cable-driven parallel robot for minimally invasive surgeries. The robot comprises a pneumatic inflatable scaffold, six hydraulic, folded pouch actuators, and a hollow, cylindrical end-effector offering five degrees of freedom. A key development is the design of the pouch actuators, which are small, low-profile, simple structures, capable of a high stroke of 180° angular displacement. The scaffold, actuators, and plastic cables are economically and rapidly fabricated using laser cutting and welding techniques. Constructed primarily from soft plastic materials, the robot can be compactly folded into a cylinder measuring 110 mm in length and 14 mm in diameter. Upon inflation, the scaffold transforms into a hexagonal prism structure with side lengths of 34 mm and edge lengths of 100 mm. The kinematic model of the robot has been developed for workspace calculation and control purposes. A series of tests have been conducted to evaluate the performance of the actuator and the robot. Repeatability tests demonstrate the robot's high repeatability, with mean and root mean square errors of 0.3645 mm and 0.4186 mm, respectively. The direct connection between the end-effector and the actuators theoretically eliminates cable friction, resulting in a hysteresis angle of less than 2°, as confirmed by the tracking results. In addition, simulated surgical tasks have been performed to further demonstrate the robot's performance. [ABSTRACT FROM AUTHOR]

[Display omitted] As ideal and smart stimuli-responsive materials for soft actuators, artificial muscles, etc., liquid crystalline elastomers (LCEs) can respond to external stimuli, including heat, light, electricity, magnetism, humidity, etc., and make corresponding deformations. Among these external stimuli, magnetic stimulus is featured by remote and contactless control, fast, precise, extremely strong penetration, safe, easy tunability, and so on. By doping magnetic nanoparticles into LCEs, their actuation and motion can be triggered by magnetic fields or forces untetheredly, remotely, and highly precisely. Therefore, the magnetic nanoparticles endow LCEs with magneto-responsiveness, opening doors to LCEs for many unique potential uses, such as magnetic read-out, magnetic valves, magnetic switches, and so on. This review summarizes recent advances in magneto-responsive LCE nanocomposites. Their fabrication is comprehensively discussed. New properties of magneto-responsive LCEs brought by magnetic nanoparticles are also thoroughly reviewed. Their promising applications are subsequently summarized and explored. [ABSTRACT FROM AUTHOR]

A Dielectric Elastomer Actuator (DEA) consists of electrodes with a dielectric layer between them. By controlling the design of the electrodes, voltage, and frequency, the operating range and speed of the DEA can be adjusted. These DEAs find applications in biomimetic robots, artificial muscles, and similar fields. When voltage is applied to the DEA, the dielectric layer undergoes compression and expansion due to electrostatic forces, which can lead to electrical breakdown. This phenomenon is closely related to the performance and lifespan of the DEA. To enhance stability and improve dielectric properties, a DEA Reservoir layer is introduced. Here, stability refers to the ability of the DEA to perform its functions even as the applied voltage increases. The Reservoir layer delays electrical breakdown and enhances stability due to its enhanced thickness. The proposed DEA in this paper is composed of a Reservoir layer and electrode layer. The Reservoir layer is placed between the electrode layers and is independently configured, not subjected to applied voltage like the electrode layers. The performance of the DEA was evaluated by varying the number of polymer layers in the Reservoir and electrode designs. Introducing the Reservoir layer improved the dielectric properties of the DEA and delayed electrical breakdown. Increasing the dielectric constant through the DEA Reservoir can enhance output characteristics in response to electrical signals. This approach can be utilized in various applications in wearable devices, artificial muscles, and other fields. [ABSTRACT FROM AUTHOR]

The hygroscopic motion of plants has inspired the development of moisture‐activated soft actuators. These actuators driven by ambient moisture sources are of great research interest in robotics and self‐regulating textiles. However, these actuators often have slow motion and can only perform bending and twisting motions. Herein, a cellulose film‐based fast‐morphing and motion‐programmable soft actuator is presented that can generate caterpillar‐like movement. The cellophane films reported here bend almost instantaneously under changing humidity, with a large bending curvature, high repeatability, and negligible hysteresis. Different actuation modes are studied using both coated and uncoated cellophane films. The uncoated cellophane film can continuously move on a moist substrate through autonomous bending–rolling–flipping (or oscillating) cycles. A facile strategy is used here to control the rolling direction and facilitate the flipping motion by offsetting its center of gravity during deformation by adding appropriate weights on the end of the actuator. The coated cellophane film is used to fabricate motion‐programmable actuators through heat‐laminating. Several actuator structures are designed and fabricated and their diverse moisture‐induced motions are demonstrated. [ABSTRACT FROM AUTHOR]

Soft robots require soft actuators for mobility and functionality. To integrate multiple functions in a limited space, researchers are developing multifunctional soft actuators with several functions integrated in one device. This study successfully demonstrates an electroluminescent (EL) soft actuator, a single device with both light‐emitting and actuating capabilities, using liquid dielectric and uniformly dispersed EL phosphor particles. EL phosphor particles are copper‐doped zinc sulfide (ZnS) particles doped with copper. The work is able to disperse the ZnS particles uniformly in the oil by coating the ZnS particles with silica, ensuring consistent luminescence across the device's active area. The performance of the soft actuator is notable, with a strain of 25% and a maximum EL intensity of 23 cd m−2 for a single actuator. When stacking multiple actuators, the intensity exceeds 29 cd m−2. The findings suggest that EL actuator devices will be valuable smart components for soft robots and interactive sensors. They can effectively represent external stimuli through color signals, expanding the capabilities of these systems. [ABSTRACT FROM AUTHOR]

This paper focuses on soft actuators that utilize fluid power to drive soft robots and describes their features and applications. First, it discusses how soft actuators function as elemental technology in robots. This is followed by an introduction to the driving principle and features of fluid-driven soft actuators. It also classifies these soft actuators based on the fluid power source and the active mode of operation. Furthermore, an overview is provided on the materials employed in soft actuators and the control and evaluation methods for them. Finally, currently reported applications of these soft actuators, such as wearable devices, grippers, and bio-inspired robots, are presented. [ABSTRACT FROM AUTHOR]

This paper illustrates an experimental activity for the closed-loop position control of an actuator made using shape memory alloy (SMA) wire. A solution with the self-sensing effect was implemented to miniaturize the systems, i.e., without external sensors. A proportional control algorithm was initially used, demonstrating the idea's feasibility; the wire can behave simultaneously as an actuator and sensor. An experimental investigation was subsequently conducted for the optimization of the developed actuator. As for the material, a Flexinol wire, Ni-Ti alloy, with a diameter of 0.150 mm and a length of 200 mm, was used. Preliminarily, characterization of the SMA wire at constant and variable loads was carried out; the characteristics detected were elongation vs. electric current and elongation vs. electrical resistance. The control system is PC based with a data acquisition card (DAQ). A drive board was designed and built to read the wire's electrical resistance and power it by pulse width modulation (PWM). A notable result is that the actuator works with good precision and in dynamic conditions, even when it is called to support a load up to 65% different from that for which the electrical resistance–length correlation has previously been experimentally obtained, on which the control is based. This opens up the possibility of using the actuator in a counteracting configuration with a spring, which makes hardware implementation and control management simple. [ABSTRACT FROM AUTHOR]

Microrobots powered by multi-physics fields are becoming a hotspot for micro–nano manufacturing. Due to the small size of microrobots, they can easily enter small spaces that are difficult for ordinary robots to reach and perform a variety of special tasks. This gives microrobots a broad application prospect in many fields. This paper describes the materials, structures, and driving principles of microrobots in detail and analyzes the advantages and limitations of their driving methods in depth. In addition, the paper discusses the detailed categorization of the action forms of microrobots and explores their diversified motion modes and their applicable scenarios. Finally, the article highlights the wide range of applications of microrobots in the fields of biomedicine and environmental protection, emphasizing their great potential for solving real-world problems and advancing scientific progress. [ABSTRACT FROM AUTHOR]

In recent years, there has been a growing demand for wearable actuators, that can be worn on individual body parts. This demand is dynamically increasing due to the numerous potential applications such as rehabilitation and enhancing load-bearing capabilities. Exoskeletons are mechanical structures that supplement or facilitate human movements and increase the body parts natural capabilities. Despite their wide range of applications, rigid exoskeletons have several deficiencies that required further developments. Soft actuators have been developed to address these deficiencies, forming one of the main categories of easily wearable exoskeletons. The two categories - rigid and soft exoskeletons - complement each other in their structures during applications. Soft robotic elements enable precise and delicate movements while providing adequate flexibility during use and rigid units are responsible for the stable frame structure and fixation. Their combined use is applied for rehabilitation, occupational safety, and enhancing work performance purposes. The aim of this article is to physically realize a device that has a legitimate purpose in the field of human hand rehabilitation. The goal was to design, manufacture, and functionally test the elements of a device capable of assisting in the rehabilitation of fingers using completely flexible actuators. [ABSTRACT FROM AUTHOR]

Present paper deals with my thoughts in my mind, which can be connected with human health. In this study I show what are the main problems with all of the technological developments all around the globe. There are so many publications which discuss the main problems and they trie to show the solutions, but these are the most difficult problems because the human do not want to leave comfortable solutions of their life nowadays. It is enough to mention that the uses of bicycle instead of the cars especially ever since the European Union finished the all-around development of bicycle ways in the area of and between the cities in European countries. It is important to know, that there are so many talented students in University of Miskolc, at Faculty of Healthcare, for example at Health-visitor and prevention professionals, who interested in in multi-and interdisciplinary borderlines of professionalism between science of health and law and technological science. I have to mention that this study is a begin of a new trend in this Faculty. [ABSTRACT FROM AUTHOR]

In recent years, a proliferation of soft actuators tailored for hand rehabilitation has been observed. In particular, modular soft actuators have garnered particular interest due to their capacity for individual customization and joint-specific support, a feature often lacking in whole-finger soft actuators. Despite these advancements, a significant limitation persists: the majority of these actuators facilitate only finger flexion, neglecting the equally vital extension movements required for comprehensive hand rehabilitation. Traditional approaches to achieving multi-degree-of-freedom or bidirectional motion have relied on the integration of multiple chambers within soft actuators. However, this strategy has proven impractical for modular soft actuators, primarily due to spatial constraints within the finger joint. To address this challenge, we introduce a foldable pouch actuator (FPA). Designed as a flat, foldable structure composed of a single sheet, the FPA expands solely upon pressurization, generating the requisite force for finger extension. Notably, the FPA seamlessly integrates with existing modular soft actuators without compromising their structural integrity or functional capabilities, thereby enabling bidirectional support for individual joints. Evaluations using a synthetic finger model achieved a joint flexion torque of 0.17 Nm and estimated an overall extension torque of 0.12 Nm. These advancements were accomplished without compromising the traditional flexion functionality, adding individual joint extension support to the existing capabilities. This study constitutes a substantive leap forward in the utilization of soft actuators for clinical hand rehabilitation applications.

Soft actuators developed for hand rehabilitation show promise, but their practical application requires addressing individual differences and establishing suitable design rules. While joint modular soft actuators offer flexibility for diverse hand dimensions, existing performance validations have only examined a limited number of actuator sizes and neglected crucial factors like joint alignment. Customization efforts have lacked standardization, relying on a trial-and-error approach. Therefore, this study systematically evaluates the impact of actuator design parameters (size and mounting position) on joint range of motion (ROM) and torque, proposing novel design rules based on linear optimization. Experimental assessments, conducted on dummy fingers emulating human biomechanics, provide profound insights into the intricate interplay of design parameters and support performance. The findings strongly advocate maintaining a reference position for stable support, irrespective of actuator size, emphasizing the need to align the actuator with the joint center. The proposed design rules incorporate user-specific finger information, offering customized design rules. Proportionate actuator lengths to single-phalangeal length (PsPL), Proportionate actuator lengths to multi-phalangeal length (PmPL), Proportionate actuator lengths to Range of Motion (PROM), and the Traditional Method are systematically compared. Assistive performances (ROM and torque) and trajectory analysis reveal that the PsPL-designed actuator exhibits the most stable and natural assistive performance. This study emphasizes the importance of understanding actuator deformations for personalized adaptation, providing valuable insights for advancements in assistive and rehabilitative technologies.

To optimize the performance of the soft actuator, numerical simulation and regression analysis of the multi-structure parameter are presented based on the numerical calculation method. Firstly, numerical simulation and regression analysis were performed on the parameters of different driving channel shapes, including equilateral triangle, square, regular pentagon, regular hexagon, and circle, to determine the driving performance under different channel cross-sections. Secondly, numerical simulation and regression analysis were conducted on the parameters of fiber winding diameter and winding angle of the soft actuator, and qualitative analysis was performed on the failure states of the numerical calculations. Lastly, numerical simulation and regression analysis were carried out on the parameters of wall thickness and driving channel length of the soft actuator to determine the influence of these parameters on the driving performance. Through the numerical simulation and regression analysis, this study provides a necessary theoretical foundation for the optimization design of soft actuator, effectively improving the development efficiency and dynamic performance of soft actuators.

Air cylinders are actuators that slide a piston inside cylinders by applying air pressure. We propose an air-cylinder-type artificial muscle that can be flexibly bent by using a flexible tube for the cylindrical part. The actuator output was a string connected to a piston. When the air-cylinder-type artificial muscle bends, the inner wall of the tube and the string come into contact, causing output fluctuations owing to friction. In this study, we investigated the output when an artificial muscle was bent. After describing the structure of the air-cylinder-type artificial muscle, the measurement results of the resistance force at each part of the actuator are presented. A theoretical output inspired by the capstan equation was derived, and its validity was verified by comparison with experimental results. [ABSTRACT FROM AUTHOR]

In this contribution, the development of a 3D-printed soft actuator integrated with shape memory alloys (SMA) wires capable of bending in two directions is presented. This work discusses the design, manufacturing, modeling, simulation, and feedback control of the actuator. The SMA wires are encased in Polytetrafluoroethylene (PTFE) tubes and then integrated into the 3D-printed matrix made of thermoplastic polyurethane (TPU). To measure and control the deformation angle of the soft actuator, a computer vision system was implemented. Based on the experimental results, a mathematical model was developed using the system identification method and simulated to describe the dynamics of the actuator, contributing to the design of a controller. However, achieving precise control of the deformation angle in systems actuated by SMA wires is challenging due to their inherent nonlinearities and hysteretic behavior. A proportional-integral (PI) controller was designed to address this challenge, and its effectiveness was validated through real experiments. [ABSTRACT FROM AUTHOR]

In the realm of virtual and augmented reality (VR/AR) and teleoperation applications, haptic feedback plays a role in enhancing task performance. One of the main goals of this study is to simplify haptic device hardware while improving its capacity to provide various stimuli at different intensities. In response to these challenges, this research introduces the Pneumatic Unit Cell (PUC), a soft pneumatically driven device—a hollow silicone cylinder with the ability to provide both static-pressure and vibrotactile feedback. Furthermore, the Pneumatic Unit Cell's design simplicity has the potential for scalability, modularity, and the flexibility to mount the device on any part of the human body. The focus of the current paper is to study PUCs as actuators and lay the foundation for future perceptual studies. The characterization studies encompass the fabrication and verification of the fabrication accuracy through dimensional measurements, characterizing PUCs under static-pressure conditions (measuring the free deflection and blocking force) and frequency conditions (measuring the free deflection). In the static-pressure conditions, we applied pressures ranging from 0 to 40 kPa to measure the free deflection and from 0 to 30 kPa to measure the blocking force. In the frequency conditions, we applied pressures of 10, 20, and 30 kPa with inflation/deflation rates varying between 0.5 Hz and 100 Hz. The measurements of free deflection under static-pressure conditions revealed that 0.9 mm and 1.2 mm PUCs exhibit a linear increase in free deflection with an increase in inflation pressure. The results of free-deflection measurements under the frequency conditions indicate a direct relationship between the free-deflection magnitude and applied pressure. The results also demonstrate an inverse relationship to the frequency of inflation/deflation. The characterization results demonstrate a broad range of free deflection observed under both static-pressure and frequency conditions, encouraging the potential application of Pneumatic Unit Cell actuators as haptic devices. [ABSTRACT FROM AUTHOR]

Soft pneumatic artificial muscles are a well actuation scheme in soft robotics due to its key features for robotic machines being safe, lightweight, and conformable. In this work, we present a versatile vacuum-powered artificial muscle (VPAM) with manually tunable output motion. We developed an artificial muscle that consists of a stack of air chambers that can use replaceable external reinforcements. Different modes of operation are achieved by assembling different reinforcements that constrain the output motion of the actuator during actuation. We designed replaceable external reinforcements to produce single motions such as twisting, bending, shearing and rotary. We then conducted a deformation and lifting force characterization for these motions. We demonstrated sophisticated motions and reusability of the artificial muscle in two soft machines with different modes of locomotion. Our results show that our VPAM is reusable and versatile producing a variety and sophisticated output motions if needed. This key feature specially benefits unpredicted workspaces that require a soft actuator that can be adjusted for other tasks. Our scheme has the potential to offer new strategies for locomotion in machines for underwater or terrestrial operation, and wearable devices with different modes of operation. [ABSTRACT FROM AUTHOR]

Soft robots distinguish themselves from traditional robots by embracing flexible kinematics. Because of their recent emergence, there exist numerous uncharted territories, including novel actuators, manufacturing processes, and advanced control methods. This research is centred on the design, fabrication, and control of a pneumatic soft robot. The principal objective is to develop a modular soft robot featuring multiple segments, each one with three degrees of freedom. This yields a tubular structure with five independent degrees of freedom, enabling motion across three spatial dimensions. Physical construction leverages tin-cured silicone and a wax-casting method, refined through an iterative processes. PLA moulds that are 3D-printed and filled with silicone yield the desired model, while bladder-like structures are formed within using solidified paraffin wax-positive moulds. For control, an empirically fine-tuned open-loop system is adopted. This paper culminates in rigorous testing. Finally, the bending ability, weight-carrying capacity, and possible applications are discussed. [ABSTRACT FROM AUTHOR]

Nonskeletal animals such as worms achieve locomotion via crawling. We consider them as an inspiration to design robots that help underline the mechanisms of crawling. In this paper, we aim to identify an approach with the simplest structure and actuators. Our robots consist of cut-and-fold bodies equipped with pneumatically-driven soft actuators. We have developed fabrication techniques for coin-sized robots. Experiments showed that our robots can move up to 4.5 mm/s with straight motion (i.e., 0.1 body lengths per second) and perform cornering and U-turns. We have also studied the friction characteristics of our robots with the ground to develop a multistate model with stick–slip contact conversions. Our theoretical analyses depict comparable results to experiments demonstrating that simple and straightforward techniques can illustrate the crawling mechanism. Considering the minimal robots' structure, this result is a critical step towards developing miniature crawling robots successfully. [ABSTRACT FROM AUTHOR]

Actuators based on soft elastomers offer significant advantages to the field of robotics, providing greater adaptability, improving collision resilience, and enabling shape‐morphing. Thus, soft fluidic actuators have seen an expansion in their fields of application. Closed‐cycle hydraulic systems are pressure agnostic, enabling their deployment in extremely high‐pressure conditions, such as deep‐sea environments. However, soft actuators have not been widely adopted on unmanned underwater vehicle control surfaces for deep‐sea exploration due to their unpredictable hydrodynamic behavior when camber‐morphing is applied. This study presents the design and characterization of a soft wing and investigates its feasibility for integration into an underwater glider. It is found that the morphing wing enables the glider to adjust the lift‐to‐drag ratio to adapt to different flow conditions. At the operational angle of attack of 12.5°, the lift‐to‐drag ratio ranges from −70% to +10% compared to a rigid version. Furthermore, it reduces the need for internal moving parts and increases maneuverability. The findings lay the groundwork for the real‐world deployment of soft robotic principles capable of outperforming existing rigid systems. With the herein‐described methods, soft morphing capabilities can be enabled on other vehicles.

Near-infrared (NIR) light-responsive liquid crystal elastomers (LCEs) doped with organic small-molecule photothermal agents have garnered scientific attention. However, the challenge remains in designing and synthesizing mesogenic photothermal dyes with absorption wavelengths greater than 800 nm. In this research, we design a novel discotic mesogenic NIR absorbing dye, namely the nickel bis(dithiolene) complex YHD868, and prepare NIR-responsive LCE/YHD868 composite films. The discotic mesogenic molecule YHD868 possesses a columnar hexagonal mesophase and exhibits intense NIR absorption at 868 nm, with a photothermal conversion efficiency of about 27 % and a molar extinction coefficient of approximately 30000 M−1·cm−1. Due to the strong NIR absorption of YHD868, combined with its excellent photothermal stability, the LCE/YHD868 composite films exhibit remarkable photoresponse and mechanical properties. Even at a low doping concentration of 0.2 wt%, the composite film can achieve a tensile strength of 9.8 MPa and an elongation at break of 165 %. Under 880 nm NIR irradiation (3.3 W·cm−2), the film can complete reversible photo-induced shrinking deformation in just 2 s, with a shrinkage ratio of about 64 %. This work offers a new approach for the development of photo-responsive smart soft materials.

The versatile motion capability of snake robots offers themselves robust adaptability in varieties of challenging environments where traditional robots may be incapacitated. This study reports a novel flexible snake robot featuring a rigid–flexible coupling structure and multiple motion gaits. To better understand the robot’s behavior, a bending model for the soft actuator is established. Furthermore, a dynamic model is developed to map the relationship between the input air pressure and joint torque, which is the model base for controlling the robot effectively. Based on the wave motion generated by the joint coupling direction function in different planes, multiple motion gait planning methods of the snake-like robot are proposed. In order to evaluate the adaptability and maneuverability of the developed snake robot, extensive experiments were conducted in complex environments. The results demonstrate the robot’s effectiveness in navigating through intricate settings, underscoring its potential for applications in various fields.

The hygroscopic motion of plants has inspired the development of moisture‐activated soft actuators. These actuators driven by ambient moisture sources are of great research interest in robotics and self‐regulating textiles. However, these actuators often have slow motion and can only perform bending and twisting motions. Herein, a cellulose film‐based fast‐morphing and motion‐programmable soft actuator is presented that can generate caterpillar‐like movement. The cellophane films reported here bend almost instantaneously under changing humidity, with a large bending curvature, high repeatability, and negligible hysteresis. Different actuation modes are studied using both coated and uncoated cellophane films. The uncoated cellophane film can continuously move on a moist substrate through autonomous bending–rolling–flipping (or oscillating) cycles. A facile strategy is used here to control the rolling direction and facilitate the flipping motion by offsetting its center of gravity during deformation by adding appropriate weights on the end of the actuator. The coated cellophane film is used to fabricate motion‐programmable actuators through heat‐laminating. Several actuator structures are designed and fabricated and their diverse moisture‐induced motions are demonstrated.

Abstract Actuators utilizing snap‐through instabilities are widely investigated for high‐performance fast actuators and shape reconfigurable structures owing to their rapid response and limited reliance on continuous energy input. However, prevailing approaches typically involve a combination of multiple bistable actuator units and achieving multistability within a single actuator unit still remains an open challenge. Here, a soft actuator is presented that uses shape memory alloy (SMA) and mixed‐mode elastic instabilities to achieve intrinsically multistable shape reconfiguration. The multistable actuator unit consists of six stable states, including two pure bending states and four bend‐twist states. The actuator is composed of a pre‐stretched elastic membrane placed between two elastomeric frames embedded with SMA coils. By controlling the sequence and duration of SMA activation, the actuator is capable of rapid transition between all six stable states within hundreds of milliseconds. Principles of energy minimization are used to identify actuation sequences for various types of stable state transitions. Bending and twisting angles corresponding to various prestretch ratios are recorded based on parameterizations of the actuator's geometry. To demonstrate its application in practical conditions, the multistable actuator is used to perform visual inspection in a confined space, light source tracking during photovoltaic energy harvesting, and agile crawling.

Abstract Soft robots require soft actuators for mobility and functionality. To integrate multiple functions in a limited space, researchers are developing multifunctional soft actuators with several functions integrated in one device. This study successfully demonstrates an electroluminescent (EL) soft actuator, a single device with both light‐emitting and actuating capabilities, using liquid dielectric and uniformly dispersed EL phosphor particles. EL phosphor particles are copper‐doped zinc sulfide (ZnS) particles doped with copper. The work is able to disperse the ZnS particles uniformly in the oil by coating the ZnS particles with silica, ensuring consistent luminescence across the device's active area. The performance of the soft actuator is notable, with a strain of 25% and a maximum EL intensity of 23 cd m−2 for a single actuator. When stacking multiple actuators, the intensity exceeds 29 cd m−2. The findings suggest that EL actuator devices will be valuable smart components for soft robots and interactive sensors. They can effectively represent external stimuli through color signals, expanding the capabilities of these systems.

The present work demonstrates the manufacturing process of a pneumatic bellow actuator with an embedded sensor, utilizing a novel manufacturing approach through the complete use of additive manufacturing techniques, such as direct ink writing (DIW) and traditional fused deposition modeling (FDM) methods. This study is innovative in its integration of a dielectric electroactive polymer (DEAP) structure with sensing electrodes made of conductive carbon grease (CCG), showcasing a unique application of a 3D-printed DEAP with CCG electrodes for combined DEAP sensing and pneumatic actuation. Initial experiments, supported by computational simulations, evaluated the distinct functionality of the DEAP sensor by itself under various pressure conditions. The findings revealed a significant change in capacitance with applied pressure, validating the sensor’s performance. After sensor validation, an additive manufacturing process for embedding the DEAP structure into a soft pneumatic actuator was created, exhibiting the system’s capability for dual sensing and actuation, as the embedded sensor effectively responded to applied actuation pressure. This dual functionality represents an advancement in soft actuators, especially in applications that require integrated and responsive actuation and sensing capabilities. This work also represents a preliminary step in the development of a 3D-printed dual-modality actuator (pneumatic and electrically activated DEAP) with embedded sensing.

This study investigates the performance enhancement of mandrel-coiled twisted and coiled polymer fibers with a nichrome heater (TCPFLNR) by coating with a solution of graphene–mesoporous carbon–nickel–polyvinyl alcohol. The coating process involved a one-pot synthesis utilizing graphene powder, Ni nanoparticles, mesoporous carbon, and PVA as a binding agent. The coating was performed by manually shaking the TCPFLNR and the subsequent annealing process, which results in improved thermal conductivity and actuation behavior of the TCPFLNR. Experimental results on a 60 mm long actuator demonstrated significant enhancements in actuation displacement and actuation strain (20% to 42%) under various loads with an input current of 0.27 A/power 2.16 W. The blocked stress is ~10 MPa under this 2.16 W power input and the maximum strain is 48% at optimum load of 1.4 MPa. The observed actuation strain correlated directly with the input power. The coated TCPFLNR exhibited better thermal contacts, facilitating enhanced heat transfer, and reducing power consumption by 6% to 9% compared to non-coated actuators. It was found that the nanomaterial coating helps the TCP actuator to be reliable for more than 75,000 actuation cycles at 0.1 Hz in air due to improved thermal conductivity. These findings highlight the potential for further research to optimize electrothermally operated TCP actuators and unlock advancements in this field.

This study introduces a novel modular soft actuator designed for an anthropomorphic robotic finger that addresses the need for adaptive behavior and precise joint-angle control. The key innovation is its modular design, which enables independent pressure regulation in each air chamber, thus achieving superior precision compared to traditional PneuNets soft actuators. A rigid skeleton is integrated to enhance force transmission and measurement capabilities and thus ensure effective force handling and transmission within each module. The versatility of the actuator is demonstrated through its adaptability in various scenarios, and its features include adaptive positional control achieved by modulating the inflation in each air chamber. This research includes kinematic and kinetostatic analyses to ensure precise control of joint angles and forces at the finger’s endpoint. Experimental results confirm the actuator’s excellent performance and adaptability, providing valuable insights for advancing soft-actuator technology. The findings suggest significant potential for this actuator in diverse applications, emphasizing its role in the future development of precise and adaptable robotic systems.

Soft continuum robots, characterized by their dexterous and compliant nature, often face limitations due to buckling under small loads. This study explores the enhancement of axial performance in soft robots intrinsically actuated with extensile fluidic artificial muscles (EFAMs) through the incorporation of bio-inspired radial supports, or ossicles. By conducting quasi-static force response experiments under varying pressure conditions (103.4–517.1 kPa), and a modified Euler column buckling model, we demonstrate that ossicles significantly increase the robots’ resistance to buckling, thereby extending their application scope in payload-carrying tasks. These findings not only underscore the effectiveness of ossicle reinforcement in improving structural robustness but also pave the way for future research to optimize soft robot design for enhanced performance.

The development of soft robotics owes much to the field of biomimetics, where soft actuators predominantly mimic the movement found in nature. In contrast to their rigid counterparts, soft robots offer superior safety and human–machine interaction comfort, particularly in medical applications. However, when it comes to the hand rehabilitation exoskeletons, the soft devices have been limited by size and material constraints, unable to provide sufficient tensile strength for patients with high muscle tension. In this paper, we drew inspiration from the muscle structure found in the tail of dragonflies and designed a novel central tendon-based bellows actuator. The experimental results demonstrated that the central tendon-based bellows actuator significantly outperforms conventional pneumatic bellows actuators in terms of mechanical output. The tensile strength of the central tendon-based bellows actuator exceeded that of pneumatic actuators more than tenfold, while adding only 2 g to the wearable weight. This finding suggests that the central tendon-based bellows actuator is exceptionally well-suited for applications demanding substantial pulling force, such as in the field of exoskeleton robotics. With tensile strength exceeding that of pneumatic bellows actuators, this biomimetic design opens new avenues for safer and more effective human–machine interaction, revolutionizing various sectors from healthcare to industrial automation. [ABSTRACT FROM AUTHOR]

A gecko foot-inspired, mushroom-shaped artificial dry adhesive exploiting intermolecular forces between microstructure and surface has drawn research attention for its strong adhesive force. However, the high pull-off strength corresponding to the adhesive force matters when detaching fragile substrates. In this study, we report a vacuum-powered soft actuator having oblique air chambers and a dry adhesive. The soft actuator performs coupled contraction and twisting by applying negative pneumatic pressure inward and exhibits not only high pull-off strength but also easy detachment. This effective detachment can be achieved thanks to the twisting motion of the soft actuator. The detachment performances of the actuator models are assessed using a 6-degrees-of-freedom robot arm. Results show that the soft actuators exhibit remarkable pull-off strength decrement from ~20 N cm−2 to ~2 N cm−2 due to the twisting. Finally, to verify a feasible application of this study, we utilize the inherent compliance of the actuators and introduce a glass transfer system for which a glass substrate on a slope is gripped by the flexibility of the soft actuators and delivered to the destination without any fracture. Vacuum-powered soft actuator with oblique air chambers for easy detachment of artificial dry adhesive by coupled contraction and twisting In this work, we report a vacuum-powered soft actuator with artificial dry adhesive. We used a vacuum for the easy detachment of the dry adhesive and verified a feasibility for the real-industrial fields. The highlights and novelty of this work are as follows: • Vacuum-powered soft actuator with Gecko inspired dry adhesive • High adhesion with an easy detachment by twisting motion • Mechanical analysis of the easy detachment • Novel glass transfer system with the 6-DOF robot arm based on the soft actuator [ABSTRACT FROM AUTHOR]