Search

Marine flow-passing components are susceptible to cavitation erosion (CE), and researchers have worked to find ways to reduce its effects. Laser Shock Peening (LSP), a material strengthening method, has been widely used in aerospace and other cutting-edge fields. In recent years, LSP has been used in cavitation resistance research. However, the current LSP research does not realize a comprehensive predictive assessment of the material's CE resistance. This paper uses m stresses to develop a comprehensive set of strengthening effect prediction models from LSP to CE using finite element analysis (FEA). Results show that the LSP-1 sample (4 mm spot, 10 J energy) introduced a compressive residual stress value of 37.4 MPa, better than that of 16.6 MPa with the LSP-2 sample (6 mm spot, 10 J energy), which is generally consistent with the experimental findings; the model predicts a 16.35% improvement in the resistance of LSP-1 sample to water jet damage, which is comparable to the experimental result of 14.02%; additionally, interactions between micro-jets do not predominate the cavitation erosion process and the final CE effect of the material is mainly due to the accumulation of jet-material interaction. [ABSTRACT FROM AUTHOR]

The demand for high-strength steel welds, as observed in civil and transport engineering, is related to a mass reduction in vehicles. Container-type trucks are examples of this kind of transport means because their boxes are able to be produced using Hardox grade steels. Therefore, this study reflects on the properties of welds in the MAG welding of Hardox 450, obtained through an innovative micro-jet cooling process with helium. This joining technology aims to reduce the formation of defects and to obtain a joint with very good assumed mechanical properties. Structural components of grade steel require welds with acceptable mechanical parameters with respect to operational loading conditions. That is, this study focuses on selecting welding parameters for the Hardox 450 steel and determining the weld quality with respect to microstructural observations and mechanical tests, such as the Charpy, tensile and fatigue tests. Weld fracturing under increasing monotonic force was examined and was strongly related to both stress components, i.e., axial and shear. The joint response under fatigue was expressed through differences in the fracture zones, i.e., at a stress value lower than the proportional limit, and weld degradation occurred in the shear and axial stress components. The data indicate that the hourglass specimen, with the weld in the centre zone of the measurement section, can be directly used to determine a weld response under cyclic loading. The impact test results showed attractive behaviour in the tested joint, as represented by 47 J at −20 °C. The recommended MAG welding parameters for Hardox 450 steel are low-oxygen when using an Ar + 18% CO2 shielding mixture. The collected results can be directly used as a guide to weld thin-walled structures (6 mm) made of Hardox grade steel, while the data from mechanical tests can support the modelling, designing and manufacturing of components made from this kind of steel grade. [ABSTRACT FROM AUTHOR]

Due to porous materials have unique pore structure， it can be used in the field of acoustic noise reduction and flow control. Firstly， the large eddy simulation （LES） method is used to simulate the flow around a circular cylinder with or without porous medium at subcritical Reynolds number. Secondly， the lift and drag coefficients under two different working conditions are compared， and the drag reduction control effect of porous medium is analyzed. Finally， the drag reduction control mechanism of porous medium is revealed by combining aerodynamic force and flow field structure changes. The results show that at the Reynolds number of 5.6×104，the maximum drag reduction rate is reached to 8.53% when the porous medium is laid at azimuth angle of 270° at the leeward side of the cylinder surface. On the one hand， due to the permeability of porous medium， it can imporve the slip velocity at the interface between porous medium and fluid， stabilize the separated shear layer on the cylinder surface， and reduce the vortex frequency. On the other hand ，the fluid can pass through porous medium， then produce the effect similar to micro‑jet， which enhance the pressure on the cylinder surface in the separation zone， and significantly reduce the pressure difference between the upstream and downstream of the cylinder and the total drag on the cylinder surface. [ABSTRACT FROM AUTHOR]

The micro-jet is the main mechanism of cavitation on materials. More and more ultrasonic cavitation assisted machining uses the micro-jet effect in the industrial field. In this paper, the micro-jet impact is considered the micro-cutting process. To deeply analyze the micro-cutting mechanism of micro-jet, the size effect of materials was considered, and the micro-cutting force model of micro-jet was established and solved based on the spherical indentation test theory and the strain gradient plasticity theory. The results showed that the micro-cutting force and impact pressure of micro-jet with size effect are larger than those without size effect and the micro-cutting force of single micro-jet is within 2.35 N. The micro-cutting force of micro-jet increases exponentially with the increase of pit radius, but only slightly increases with the increase of pit depth. When the size effect is considered or not, the impact pressure of micro-jet is 1616–2922 MPa or 1615–1980 MPa, respectively. The increased ratio of micro-cutting force with size effect is 1 + 2 m ¯ 2 a 2 G 2 b h a 2 + h 2 σ JC 2 - 1 × 100 % , which can directly reflect the strength of size effect. The size effect is more obvious when the pit size is smaller, and the maximum increased ratio is 47.54%. The increased ratio increases nonlinearly with the decrease of pit radius and the increase of pit depth. It has a strong correlation with pit radius and pit depth. This paper can provide a theoretical viewpoint and support for the quantitative description of cavitation effect in ultrasonic-assisted machining. [ABSTRACT FROM AUTHOR]

Micro-structure on metal surface can be created with high precision and good surface quality by ultrasonic-assisted electrochemical micromachining (USEMM). One of the prevalent material removal mechanisms in ultrasonic machining (UM) is cavitation erosion. However, the mechanism of material erosion is not clear and worth investigating. This study of the mechanical and chemical effects of the ultrasonic vibration on the 6061 aluminum alloy is targeted to reveal the material processing mechanism in USEMM. Based on the built model, the velocity of micro-jet produced near the workpiece surface by ultrasonic cavitation reaches up to 350 m/s when bubble collapses computed by software MATLAB. The impact of micro-jet produces plastic micro-pits on the metal surface and the convex peak around the edge of the pits, which is verified in ABAQUS software. The metallographic microscope and curves of the electrochemical polarization behavior results indicate a significant grain refinement and a marked increase of anodic dissolution current, as well as a weaker resistance than the original workpiece in NaNO3 electrolyte during UM. The current-time curve during machining demonstrates the passive layer forms on the metal surface and then breaks down at the time of less than 0.0066s in USEMM. Micrographs of scanning electron microscope (SEM) of the machined surface in different stages show that many uniform and flat pits are formed in USEMM, compared with the local uneven pits in EMM. [ABSTRACT FROM AUTHOR]

The thermal management issue of high electronic chips with heat flux is one of the most challenge during the development of electronic devices. In this work, the design of micro pin fin arrays (MPFA) of micro-jet heat sink was proposed to achieve effective cooling of electronic chips. The MPFA with different cross-sectional shapes were used to improve the thermal performance of the heat sink. The results show that heat sink design with MPFA exhibit excellent cooling performance while consuming approximately the same amount of power as smooth surface. In addition, the hexagonal cross-section has better thermal performance, the temperature uniformity of the heating surface can be improved by up to 70 % and the average temperature can be reduced by 7–20K. Moreover, the manufacturing cost and cooling performance per unit cost were investigated and the results show that the square cross-section is the most commercially viable. Based on this, the square cross-section was parametrically studied, including the length to height ratio and fins number. It was founded that the heat sink exhibits better thermal performance for a length-to-height ratio of 1.4 and a number of fins of 169. Finally, the ultimate heat flux of the electronic chip can be withstood was also tested, and the optimal heat sink design can handle heat flux of 400W/cm2. Therefore, the heat sink with MPFA design can significantly improve the thermal performance without consuming the pump power, which can be used to cooling the high electronic chips with high heat flux in the future. • Micro pin fin arrays greatly improve the thermal performance of the heat sink. • Enhanced heat transfer without additional power consumption of heat sink. • Manufacturing costs and cooling benefits of heat sinks were analyzed. • Optimal heat sink design can handle up to 400W/cm2 on the chip surface. [ABSTRACT FROM AUTHOR]

The influence of slug flow on local corrosion of pipeline was studied, and the protection measures for slug flow corrosion were well done to improve the safety of oil-gas-water-humidity mixed pipeline. An indoor loop test was designed to simulate the slug flow in real undulating pipelines. The surface microstructures of X70 hanging pieces were studied by scanning electron microscopy (SEM) under slug flow conditions at different test stages. At the beginning of the test, there was much pitting corrosion on the surface of the hanging pieces, but at the end of the test, only some pitting or pitting spots developed into serious local corrosion. The flow corrosion of slug in pipe had obvious characteristics of cavitation corrosion. Its occurrence was the result of synergistic action of various mechanisms. The strong impact force, high impact velocity and mechanical action of multi-frequency micro-jet produced by cavitation annihilation significantly affected the development process and characteristics of electrochemical corrosion, which resulted in that the cavitation corrosion was mostly pitting corrosion. The damage of corrosion product film caused by high-speed micro-jet impact caused by cavitation cracking was local, and the pitting tendency increased at the local damage of corrosion product film. However, with the formation of electrochemical corrosion products, the destroyed corrosion product film was repaired continuously, but did not develop into local corrosion. Local corrosion occurred only when the high-speed micro-jet with cavitation breakdown repeatedly impacted a point of pitting tendency, but this probability was smaller than that of pitting tendency. [ABSTRACT FROM AUTHOR]

• Collapsing dynamics of a cavitation bubble between a particle and wall is experimentally investigated with high-speed camera. • Depending on the directions of micro-jets, bubble collapsing behavior could be categorized into three cases. • Four different kinds of transitions among three cases are demonstrated. In the present paper, the collapsing dynamics of a laser-induced cavitation bubble between a spherical particle and a solid wall is fully revealed using a high-speed camera based cavitation experimental system. For the purpose of comparisons, experiments of cases without the presence of the particle are also conducted and demonstrated. Influences of several paramount parameters (including the bubble radius, the particle radius, and the relative positions among the bubble, the particle and wall) on the bubble collapsing dynamics, the motions of bubble boundaries and the positions of the bubble centroid are all investigated. Based on the directions of the micro-jets during the bubble collapse, the bubble collapsing behavior could be categorized into three cases with their primary characteristics revealed. Furthermore, the transitions among three different cases are clearly demonstrated using several examples in terms of high-speed photography. Based on a large amount of experimental data, quantitative discussions on the parameter zone of the identified three typical cases are given in terms of the three non-dimensional parameters. Generally speaking, the particle scale does not show significant influences on the bubble dynamics behavior except some special positions of the bubble. [ABSTRACT FROM AUTHOR]

Abstract In a disaster response situation, Unmanned Aerial Vehicle (UAV) can be an effective medium for the assessment of damages/needs of affected regions through the collection of situational information in the form of texts, audio-visuals, images etc. Through field deployment in disaster response situations, it is challenging to determine the navigation route for a UAV to cover the appropriate shelter points within its allocated flight time due to the energy constraints. Besides, it is a very arduous task to predict the favorable weather conditions and data-rate through the actual deployment of UAVs in post-disaster situations. In this paper, a novel navigation technique for micro-jet has been designed based on the spatial data. The navigation technique has been thought of as a spatial decision problem which has further been solved systematically by means of Multi-Criteria Decision Making (MCDM) technique. A Multi-Criteria Evaluation Technique has been adopted for effective transformation of spatial and calibration parameters into meaningful decisions. The navigation path has been obtained dynamically based on the solution of the spatial decision problem. This decision problem utilizes the parameters likes wind speed, wind direction, remaining flight time, the distance between the neighboring Shelter Points, the volume of data to be transferred etc. From the simulations, it has been analyzed that the newly proposed navigation technique can significantly improve the flight time of micro-jet by consuming less energy. The proposed approach has a prolonged flight duration and consumes less energy compared to the previously proposed techniques i.e. MIN_ROUTE and ROUTE_PRIORITY for different variations of wind speed and wind direction. Two field trials at different venues have been conducted using a customized micro-jet (equipped with a Single Board Computer with 2.4 GHz Wi-Fi connectivity) to analyze, (a) optimal altitude for navigation route at which data transfer rate would be maximum, (b) performance in terms of flight path calibration parameters of micro-jet, data transfer rate and the volume of data transfer while implementing the navigation route generated during simulation at the optimal altitude for a particular wind speed and wind direction. It has been observed that (1) in the initial deployment, at an altitude of 55 meters, for the wind speed 3 m/s and wind direction towards south the highest data rate of 154.51 KBps has been achieved, (2) in the subsequent field trial, during navigation the highest data rate of 942.08 KBps, at 50–55 meters altitude at wind speed of 1.66 m/s and with the wind direction towards north-east, has been achieved. [ABSTRACT FROM AUTHOR]

In the present paper, the interactions between a cavitation bubble and a spherical particle are experimentally investigated with the aid of high-speed camera. The cavitation bubble is generated by a focused laser beam with the bubble size adjusted through energy dissipater. A series of experimental work is conducted with variations of the bubble sizes, the particle sizes and the distance between the bubble and the particle. Based on the collapsing process of cavitation bubble near the particle, three cases (mushroom-shaped, pear-shaped and spherical-shaped collapses) are quantitatively identified and the criterions for separating three cases are also given in terms of non-dimensional parameters. Furthermore, transitions between the aforementioned cases during parameter variations are also shown together with several examples. Finally, some special cases (e.g. collapse of two bubbles near the particle) are also discussed with typical collapsing process shown. [ABSTRACT FROM AUTHOR]

In this paper we present a numerical study investigating the effects of nozzle geometry on stability, shape and flow characteristics of micron-sized liquid jets, produced by injection molded gas dynamic virtual nozzles (GDVNs) operating in vacuum. The jet characteristics are described as a function of (i) capillary-to-orifice distance, (ii) nozzle outlet orifice diameter, and (iii) liquid feeding capillary angle. An experimentally verified numerical model of GDVN with laminar two-phase Newtonian compressible flow, based on finite volume method and volume of fluid interface tracking, is used to assess the changes. The study is performed for two sets of liquid flow rates while keeping the gas flow rate constant. It is observed that for each value of capillary-to-orifice distance and nozzle outlet diameter there is a minimum liquid flow rate below which the jet is unstable. We find that the nozzle outlet diameter has the biggest influence on the jet diameter, length and velocity, while liquid capillary angle has no observable effect on jet characteristic. Varying capillary-to-orifice distance does not affect the flow field around micro-jet. It is found that the liquid and the gas interaction near the meniscus primarily affect the jet stability and shape. [ABSTRACT FROM AUTHOR]

The paper offers mathematical equations of the influence of micro-jet cooling on structure and impact toughness properties of metal weld deposit. Weld metal deposit (WMD) was carried out for standard MIG welding and for MIG welding with micro-jet cooling. This new method is very promising mainly due to the high amount of AF (acicular ferrite) and low amount of MAC (selftempered martensite, retained austenite, carbide) phases in WMD. That structure corresponds with very good mechanical properties ie. good impact toughness of welds at low temperature. Micro-jet cooling after welding can find serious application in automotive industry very soon. Until that moment only argon, helium, nitrogen and gas mixtures of argon were tested for micro-jet cooling after welding. The best results of mechanical properties of WMD in presented welding method correspond with micro-jet argon cooling. [ABSTRACT FROM AUTHOR]

The material selected for this investigation was low alloy weld metal deposit after TIG welding with various amount of oxygen in weld metal deposit (WMD). After TIG process it is difficult to get proper amount of oxygen in WMD on the level much lower than 350 ppm. The highest impact toughness of low alloy WMD corresponds with the amount of oxygen in WMD above 350 ppm. In the paper focuses on low alloy steel after innovate welding method with micro-jet cooling that could be treated as a chance on rising amount of oxygen in weld. Weld metal deposit (WMD) was carried out for TIG welding with micro-jet cooling with various amount of oxygen in WMD. In that paper various gas mixtures (gas mixtures Ar-O2 and Ar-CO2) were tested for micro-jet cooling after TIG welding. An important role in the interpretation of the results can give methods of artificial intelligence. [ABSTRACT FROM AUTHOR]

We measure the minimum liquid flow rate Q min to produce steady jetting in gaseous flow focusing with orifices of diameters down to 30 μ m. We compare the results obtained for different diameters and liquids. Using dimensional analysis, we determine the influence of the gas viscosity on this stability limit. For low and moderately low-viscosity liquids, there is an optimum value of the gas viscosity for which Q min reaches its lowest value. This optimum value leads to the minimum jet diameter in front of the discharge orifice. • The stability limit of steady jetting in gaseous flow focusing was measured. • We use the orifice-plate configuration with diameters down to 30 micras. • We use dimensional analysis to study the gas viscosity effect without changing it. • There is an optimum gas viscosity for moderately low viscosity liquids. [ABSTRACT FROM AUTHOR]

The paper focuses on low alloy steel after innovate welding method with micro-jet cooling. Weld metal deposit (WMD) was carried out for welding and for MIG and MAG welding with micro-jet cooling. This method is very promising mainly due to the high amount of AF (acicular ferrite) and low amount of MAC (self-tempered martensite, retained austenite, carbide) phases in WMD. That structure corresponds with very good mechanical properties, ie. high impact toughness of welds at low temperature. Micro-jet cooling after welding can find serious application in automotive industry very soon. Until that moment only argon, helium and nitrogen were tested as micro-jet gases. In that paper first time various gas mixtures (gas mixtures Ar-CO2) were tested for micro-jet cooling after welding. [ABSTRACT FROM AUTHOR]

In ultrasonic-assisted machining, the synergistic effect of the cavitation effect and micro-abrasive particles plays a crucial role. Studies have focused on the investigation of the micro-abrasive particles, cavitation micro-jets, and cavitation shock waves either individually or in pairs. To investigate the synergy of shock waves and micro-jets generated by cavitation with micro-abrasive particles in ultrasonic-assisted machining, the continuous control equations of a cavitation bubble, shock wave, micro-jet, and micro-abrasive particle influenced by the dimensionless amount (R/R 0), a particle size-velocity–pressure model of the micro-abrasive particle was established. The effects of ultrasonic frequency, sound pressure amplitude, and changes in particle size on micro-abrasive particle velocity and pressure were numerically simulated. At an ultrasonic frequency of 20 kHz and ultrasonic sound pressure of 0.1125 MPa, a smooth spherical SiO 2 micro-abrasive particle (size = 5 µm) was obtained, with a maximum velocity of 190.3–209.4 m/s and pressure of 79.69–89.41 MPa. The results show that in the range of 5–50 μm, smaller particle sizes of the micro-abrasive particles led to greater velocity and pressure. The shock waves, micro-jets, and micro-abrasive particles were all positively affected by the dimensionless amount (R/R 0) of cavitation bubble collapse, the larger the dimensionless quantity, the faster their velocity and the higher their pressure. [ABSTRACT FROM AUTHOR]

• A comprehensive geometrical study is performed on the passive planar mixers with bent baffles. • A novel planar micromixer with Z-shaped baffles and octagonal mixing units achieves a high mixing efficiency at the short distance of 2800 µm. • The mixing mechanisms inside the proposed mixer includes the reduction of molecular lateral diffusion distance, the split and recombination of fluids, vortex formation and asymmetric flow. • The micromixer has great potential in biochemical engineering applications. As an important pre-treatment part of the micro-total analysis system, the micromixer that ensures the uniform mixing of samples and reagents in a short distance is essential for the improvement of the detection accuracy. Here, a type of passive planar micromixer with narrow gaps and obstacles arranged in the mixing units is proposed. The mixer utilizes the micro-jets and bent baffles to split and recombine streams and promote vortex formation, which breaks the laminar flow when the Reynolds number (Re) varies from 0.1 to 50. The performance of the unoptimized mixer decreases first and then increases with the increase of Re. However, a poor mixing quality is found in the range of 0.5 ≤ Re ≤ 15. To surmount the above shortcomings, a comprehensive geometrical study is performed on this micromixer and the effects of various parameters such as the width and length of the gap, the shape of the baffle, and mixing unit on the mixing quality and pressure drop are analyzed. The results show that the reduction of gap width and the increase of the gap length result in the improvement of mixing efficiency. The staggered Z-shaped baffles accelerate the mixing process compared to traditional V-shaped baffles owing to asymmetric flow and vortex, which leads to excellent mixing. The results also show that the octagonal mixing unit increases mixing efficiency without basically changing pressure drop because the progressive and tapered structure enhances the convection. Lastly, a novel micromixer whose mixing performance is close to 0.8 at Re = 0.5 at the short distance of 2800 µm is proposed, fabricated and tested. This work provides a reference for the development of high-efficiency mixers in the pre-processing part of the micro-total analysis system. [ABSTRACT FROM AUTHOR]

• Non-lethal blasts can produce cerebrospinal fluid (CSF) cavitation. Blast induced traumatic brain injury (bTBI) has been a prevalent injury in recent conflicts. Post-mortem studies have shown damage in the brain tissue close to the cerebrospinal fluid (CSF) in bTBI cases compared to non-blast TBI cases. CSF cavitation is a potential mechanism for this brain/CSF interface injury. In this study, our aim was to explore the possibility and mechanism of blast induced CSF cavitation. We first developed a one-dimensional simplified human head surrogate and exposed it to nonlethal blast waves using a shock tube. High-speed videography and pressure sensors data showed the formation and collapse of cavitation in the CSF simulant. Then, we explored the mechanism of the cavitation using a finite element model of the head surrogate. We found that the pressure waves transmitting through the skull (outer wave) and tissue simulants (inner wave) are responsible for the generation and collapse of the cavitation bubbles, respectively. Next, we used this insight to explore the possibility of CSF cavitation in the human head using a detailed finite element model. The simulations verified the role of the inner and outer waves in the generation and collapse of cavitation. Our results suggested that CSF cavitation is likely to happen in the human head under blast loading. Finally, we studied the CSF cavitation in head surrogate models with different lengths. The results showed that the head length significantly affected the CSF cavitation, indicating the potential drawback of using small animals to study bTBI in human head. Our findings can improve our understanding of the brain/CSF interface injury after blast exposure and inform the design of protection systems and animal tests. [ABSTRACT FROM AUTHOR]

The horizontal outflow of liquid from micro-holes in a thin wall into a rarefied medium with a controlled degree of pressure drop is investigated. An azeotropic mixture of ethanol and water was used as a working fluid. With the help of photographic and video equipment, changes in the parameters of the flow of a liquid jet were recorded: the deflection of the flow of an overheated micro-jet against the force of gravity, the appearance of bifurcation points with the formation of several jet two-phase flows, and explosive decay of the jet flow. Possible reasons for the observed effects due to capillary-pressure instability of superheated ethanol micro-flows are discussed. • The horizontal flow of liquid. • The rise of horizontally ethanol jets. • The thermocapillary instability of the flows. [ABSTRACT FROM AUTHOR]

The material selected for this investigation was low alloy steel weld metal deposit (WMD) after MIG welding with micro-jet cooling. The present investigation was aimed as the following tasks: obtained WMD with various amount of acicular ferrite and further analyze impact toughness of WMD in terms of acicular ferrite amount in it. Weld metal deposit (WMD) was first time carried out for MIG welding with micro-jet cooling of compressed air and gas mixture of argon and air. Until that moment only argon, helium and nitrogen were tested as micro-jet gases for MIG/MAG processes. An important role in the interpretation of the results can give methods of artificial intelligence. [ABSTRACT FROM AUTHOR]

Experimental characterization of micro-jets is challenging because of the small dimensions of the micro-nozzle. In this study, we propose a new technique to visualize the instantaneous 3D structure of a pulsed gas micro-jet. Using phase-averaging of Schlieren visualizations obtained with a high-speed camera and 3D reconstruction through a filtered back projection algorithm, it is possible to follow the high-speed dynamics of the pulsed jet. The experimental technique is illustrated by a 3D reconstruction of a pulsed helium micro-jet. The technique is simple yet very useful. To our knowledge, it is the only experimental method to analyze the instantaneous 3D structure and high frequency dynamics of pulsed micro-jets. Graphical Abstract: [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Cavitation damage is a micro, high-speed, multi-phase complex phenomenon caused by the near-wall bubble group collapse. The current numerical simulation method of cavitation mainly focuses on the collapse impact of a single cavitation bubble. The large-scale simulation of the cavitation bubble group collapse is difficult to perform and has not been studied, to the best of our knowledge. In this study, the equivalent model of impact loading of acoustic bubble collapse micro-jets is proposed to study the cavitation erosion damage of materials. Based on the theory of the micro-jet and the water hammer effect of the liquid–solid impact, an equivalent model of impact loading of a single acoustic bubble collapse micro-jet is established under the principle of deformation equivalence. Since the acoustic bubbles can be considered uniformly distributed in a small enough area, an equivalent model of impact loading of multiple acoustic bubble collapse micro-jets in a micro-segment can be derived based on the equivalent results of impact loading of a single acoustic bubble collapse micro-jet. In fact, the equivalent methods of cavitation damage loading for single and multiple near-wall acoustic bubble collapse micro-jets are formed. The verification results show the law of cavitation deformation of concrete using equivalent loading is consistent with that of a micro-jet simulation, and the average relative errors and the mean square errors are insignificant. The equivalent method of impact loading proposed in this paper has high accuracy and can greatly improve the calculation efficiency, which provides technical support for numerical simulation of concrete cavitation. [ABSTRACT FROM AUTHOR]

The removal of the adsorbed oil droplet is critical to deoiling treatment of oil-bearing solid waste. Ultrasonic cavitation is regarded as an extremely useful method to assist the oil droplets desorption in the deoiling treatment. In this paper, the effects of cavitation micro-jets on the oil droplets desorption were studied. The adsorbed states of oil droplets in the oil-contaminated sand were investigated using a microscope. Three representative absorbed states of the oil droplets can be summarized as: (1) the individual oil droplet adsorbed on the particle surface (2) the clustered oil droplets adsorbed on the particle surface; (3) the oil droplet adsorbed in a gap between particles. The micro-jet generation during the bubble collapse near a rigid wall under different acoustic pressure amplitudes at an ultrasonic frequency of 20 kHz was investigated numerically. The desorption processes of the oil droplets at the three representative absorbed states under micro-jets were also simulated subsequently. The results showed that the acoustic pressure has a great influence on the velocity of micro-jet, and the initial diameter of cavitation bubbles is significant for the cross-sectional area of micro-jets. The wall jet caused by a micro-jet impacting on the solid wall is the most important factor for the removal of the absorbed oil droplets. The oil droplet is broken by the jet impinging, and then it breaks away from the solid wall due to the shear force generated by the wall jet. In addition to a higher sound pressure, the cavitation bubble at a larger initial diameter is more important for the desorption of the clustered oil droplets. Conversely, the micro-jet generated by the cavitation bubble at a smaller initial diameter (0.1 mm) is more appropriate for the desorption of the oil droplet in a narrow or sharp-angled gap. [ABSTRACT FROM AUTHOR]

• Effect of surface tension on acoustic cavitation is studied by adding surfactant. • Micro bubble in certain size is generated in liquid with different surface tension σ. • Acoustic-driven bubble evolution near a rigid wall in liquid with various σ are recorded. • Effect mechanisms of σ on bubble dynamics in ultrasonic field are discussed. • Mechanisms of lower σ on efficiency increase of ultrasonic applications are analyzed. Acoustic cavitation is a very important hydrodynamic phenomenon, and is often implicated in a myriad of industrial, medical, and daily living applications. In these applications, the effect mechanism of liquid surface tension on improving the efficiency of acoustic cavitation is a crucial concern for researchers. In this study, the effects of liquid surface tension on the dynamics of an ultrasonic driven bubble near a rigid wall, which could be the main mechanism of efficiency improvement in the applications of acoustic cavitation, were investigated at the microscale level. A synchronous high-speed microscopic imaging method was used to clearly record the temporary evolution of single acoustic cavitation bubble in the liquids with different surface tension. Meanwhile, the bubble dynamic characteristics, such as the position and time of bubble collapse, the size and stability of the bubbles, the speed of bubble boundaries and the micro-jets, were analyzed and compared. In the case of the single bubbles near a rigid wall, it was found that low surface tension reduces the stability of the bubbles in the liquid medium. Meanwhile, the bubbles collapse earlier and farther from the rigid wall in the liquids with lower surface tension. In addition, the surface tension has no significant influence on the speed of the first micro-jet, but it can substantially increase the speed of second and the third micro-jets after the first collapse of the bubble. These effects of liquid surface tension on the bubble dynamics can explain the mechanism of surfactants in numerous fields of acoustic cavitation for facilitating its optimization and application. [ABSTRACT FROM AUTHOR]

Abstract: A planar optode system based on an oxygen quenchable luminophore platinum (II) octaethyporphrin (PtOEP) bound with thin polystyrene (PS) film and UV light-emitting diodes (UV-LEDs) was developed to measure the dissolved oxygen (DO) concentration field in micro-scale water flows. An intensity-based method adopting a pixel-to-pixel in situ calibration technique was used to visualize DO concentration fields around an impinging micro-nozzle. The achievable spatial resolution of the acquired concentration map could be as high as 2.94μm. A micro-round water jet having 100% of DO was obliquely impinged on to a PtOEP/PS film coated plate placed in a 0% of DO water container. Velocity fields were obtained by computational fluid dynamics (CFD) analysis and it is demonstrated that the high DO concentration region was coincided with the impingement area. The DO concentration gradient due to DO diffusion was affected by the Reynolds number. [Copyright &y& Elsevier]

Abstract: Soft X-ray absorption (XA) and emission (XE) spectroscopy is a powerful method for probing the local electronic structure of light elements (e.g. C, O, N, S) and transition metals, which are all of importance for biochemical systems. Here, we report for the first time on the XE spectra of a liquid micro-jet sample in a vacuum environment. We developed a high resolution X-ray emission spectrometer and recorded the spectra of pure water in full agreement with those of the literature, as well as of an aqueous solution of NiCl2. For the latter system, ground state Hartree–Fock calculations using a self-consistent reaction field (SCRF) approach were carried out to specify the nature of the d-occupied orbital. Our results confirm the dark-channel-fluorescence-yield mechanism that we recently proposed for the case of metal ions in aqueous solutions. The ability to record absorption and emission spectra of an aqueous liquid-jet opens the way for the study of biochemical systems in physiological media. [ABSTRACT FROM AUTHOR]

Abstract: Micro-jet plasma chemical vapor deposition can produce quartz-like localized coatings from HMDSO/O2 (hexamethyldisiloxane) mixture with an extremely high deposition rate (120 μm/s). The reaction between HMDSO and O2 takes place in the jet. Less than 0.5 ms is required to remove the methyl groups from the monomer and to oxidize Si. The chemical composition of the product is close to SiO2. It was found that the optimal parameters for a well-defined deposition differ with the capillary''s inner diameter (ID) and depend strongly on the jet expansion. The lower the background pressure p c related to the capillary exit pressure, the more the jet expands. A small ID requires a relatively high flux and a high p c for a confined jet which, in turn, ask for a high power density for the excitation of the gas. [Copyright &y& Elsevier]

The degradation process of 316L stainless steel caused by cavitation was investigated by means of finite element analysis. The damage characteristics of metal specimens subjected to the cavitation bubble collapse process were recreated by simulation with a micro-jet water hammer. The simulation results were compared with the cavitation pits created in the experimental tests. In the experiment, different inlet and outlet pressures in a test chamber with a system of barricade exciters differentiated the erosion process results. Hydrodynamic cavitation caused uneven distribution of the erosion over the specimens' surface, which has been validated by roughness measurements, enabling localisation and identification of the shape and topography of the impact pits. The erosion rate of the steel specimens was high at the beginning of the test and decreased over time, indicating the phase transformation and/or the strain-hardening of the surface layer. A numerical simulation showed that the impact of the water micro-jet with a velocity of 100 m/s exceeds the tensile strength of 316L steel, and produces an impact pit. The subsequent micro-jet impact on the same zone deepens the pit depth only to a certain extent due to elastoplastic surface hardening. The correlation between post-impact pit geometry and impact velocity was investigated. [ABSTRACT FROM AUTHOR]

The paper is focused on testing the weld of the S960MC steel produced at the micro-jet cooling under static and fatigue loading at critical parameters. This kind of material was in the form of a sheet with a thickness equal to 2 mm. The joint was obtained using three different types of welding wires: EDFK 1000, Union NiMoCr and Union X96 at the same parameters of the process. The joints were examined using non-destructive and destructive tests. The results from non-destructive experiments enable us to assess the quality of the welds directly before the joining process. In contrast, the destructive one allows following welds behavior under different loading conditions with their critical parameters. The bending experiments confirmed the good plastic properties of the weld, expressed by no cracks in the region tested in many variants of the joint manufactured. The results from static tests indicated a significant reduction of mechanical parameters of the weld in comparison to the base metal, expressed by 50% differences. Fatigue data have enabled us to follow the welding behavior at the increasing amplitude of axial stress up to fracture at constant amplitude value covering the following values of stress 650 MPa–100 MPa. Variations of total energy are presented at different values of several cycles up to fracture. Fracture regions are collected for analysis of the joint region features under cyclic loading. They have indicated differences in weld cracking depended on the stress level. Finally, the Wöhler S-N curve of the weld was determined, indicating the value of the fatigue limit of the weld tested, i.e., 100 MPa. The weld at the Union NiMoCr welding wire was indicated as the joint having the highest resistance on static and fatigue loadings. [ABSTRACT FROM AUTHOR]

• The dynamics of bubble from initial expansion to collapse stages were simulated. • A typical double-peak structure of shock wave was detected by a hydrophone. • The jet speed and water hammer pressure under different conditions were compared. • CSF experiments were carried out and acquire specimens with good quality. This paper aims at introducing a novel forming technology named Cavitation Shotless Forming (CSF) and simulating the dynamics of cavitation bubble from initial expansion to collapse stages. The plasma shock wave and bubble collapse shock wave were detected under different laser energies. A wall reflection shock wave was detected by a hydrophone, which is consistent with the simulation result. The trajectory of the bubble was captured by Matlab software. The bubble moves towards the solid wall due to the Bjerknes force. The bubble shape, pressure field and velocity field distributions under different standoff distances were compared. The impinging time of micro-jet was prolonged when the standoff distance was small, and the jet speed and maximum pressure increases with the increasing of standoff distances. In addition, the water hammer pressure under different standoff distances and initial bubble pressures were analyzed. It increases with the increase of initial bubble pressure but decreases with the standoff distance. Finally, the experiments of CSF were carried out, and the specimens show typical morphologies under different standoff distances and the forming depth of specimen decreases with the increase in standoff distances. [ABSTRACT FROM AUTHOR]

Liquid micro-jets are crucial for sample delivery of protein crystals and other macromolecular samples in serial femtosecond crystallography. When combined with MHz repetition rate sources, such as the European X-ray free-electron laser (EuXFEL) facility, it is important that the diffraction patterns are collected before the samples are damaged. This requires extremely thin and very fast jets. In this paper we first explore numerically the influence of different nozzle orifice designs on jet parameters and finally compare our simulations with the experimental data obtained for one particular design. A gas dynamic virtual nozzle (GDVN) model, based on a mixture formulation of Newtonian, compressible, two-phase flow, is numerically solved with the finite volume method and volume of fluid approach to deal with the moving boundary between the gas and liquid phases. The goal is to maximize the jet velocity and its length while minimizing the jet thickness. The design studies incorporate differently shaped nozzle orifices, including an elongated orifice with a constant diameter and an orifice with a diverging angle. These are extensions of the nozzle geometry we investigated in our previous studies. Based on these simulations it is concluded that the extension of the constant diameter channel makes a negligible contribution to the jet's length and its velocity. A change in the angle of the nozzle outlet orifice, however, has a significant effect on jet parameters. We find these kinds of simulation extremely useful for testing and optimizing novel nozzle designs. [ABSTRACT FROM AUTHOR]

• Experimental characterization of droplet velocity emerging from gas-focused micro-jet breakup. • Validation of the numerical model of micro-jet in terms of its velocity and shape. • Improved capability in virtual design of micro-nozzles for sample delivery in femtosecond crystallography. Compressible multiphase numerical simulations of gas-focused micro-jets are compared with the experimental data obtained with the dual pulse imaging laser-induced fluorescence drop velocimetry. Such jets, originating from a 3D printed gas dynamic virtual nozzle into a low-vacuum (150 Pa) environment, are increasingly being used for sample delivery in serial femtosecond crystallography. The distance traveled by a detaching drop from the jet is measured between the two consecutive illumination pulses with a known time delay at the positions 200 µm and 450 µm from the nozzle. Additionally, the high-speed camera images are used to analyze the shape of the jet. An axisymmetric, compressible, Newtonian two-phase helium-water mixture model is numerically solved within the framework of the volume of fluid and the finite volume method. The experimental and the computational studies are performed with a constant volumetric liquid flow rate of 14 μl/min and the gas mass flow rate in the range from 4.6 mg/min to 20 mg/min. The related jet Reynolds number ranges from 120 to 220 and Weber number from 30 to 150. The maximum difference between the measurements and the results of the numerical model in terms of the droplet velocity and jet diameter is within 10 %. The study provides new information on the jet velocities for micron-sized gas-focused nozzles. The validated numerical model can be used as a design tool for the nozzles dedicated to the specific needs of the femtosecond crystallography experiments. [ABSTRACT FROM AUTHOR]

• The size effect of materials should be considered in the formation of cavitation pits. • The prediction models of cavitation impact load, impact pressure and velocity of micro-jet with size effect were established. • A size effect coefficient 1 + 54 h p α 2 μ 2 b d p 2 σ JC 2 was defined. • The predicted values of parameters increased by about 11%–88% for the ten typical cavitation pits when considering the size effect. High-speed micro-jet produced by cavitation collapse near the wall is the main mechanism of material damage, and cavitation pit is the most typical damage feature. The reason why high-pressure and high-speed micro-jet can only cause nano- and microscale cavitation pit is that the micro-jet is a short-term impact load of nano- and microscale, and the material shows size effect during the formation of pits. To further explore the cavitation damage characteristics and deformation mechanism of materials, the theoretical framework of indentation test and J-C constitutive model were adopted, and the size effect of materials during the process of cavitation pit formation was mainly considered, and the prediction models of cavitation impact load, impact pressure and velocity of micro-jet were established. The results showed that the equivalent stress and strain of cavitation pit and the impact pressure and velocity of micro-jet are only related to the diameter-to-depth ratio of pit without size effect, and also to the diameter of pit with size effect. Larger diameter and deeper depth of the pit infers greater cavitation impact load, and the influence of the pit diameter is more obvious. When considering the size effect, there is an additional size effect coefficient: 1 + 54 h p α 2 μ 2 b d p 2 σ JC 2 . In the selected size range of pit, the cavitation impact load, impact pressure and velocity of micro-jet predicted with size effect increase by 0.9408%–322.5% compared with those without size effect. The maximum increase ratio appears at the minimum of diameter-to-depth ratio of pit (d p = 2 μm and d h = 2 μm), that is, the smaller the pit diameter is and the greater the depth is, the greater the increase ratio is. Ten typical cavitation pits were selected for inversion analysis. The impact pressure and velocity of micro-jet with and without size effect are 473–1131 MPa and 355–848 m/s, and 427–604 MPa and 320–453 m/s, respectively. The predicted values increase by about 11%-88% when considering the size effect, and the micro-jet velocity predicted is closer to that observed by high-speed cameras, which confirms the necessity and rationality of size effect in the inversion analysis of cavitation pits. [ABSTRACT FROM AUTHOR]

In this paper, the lattice Boltzmann pseudo-potential model coupled the Carnahan–Starling (C-S) equation of state and Li's force scheme are used to study the collapse process of cavitation bubbles near the concave wall. It mainly includes the collapse process of the single and double cavitation bubbles in the near-wall region. Studies have shown that the collapse velocity of a single cavitation bubble becomes slower as the additional pressure reduces, and the velocity of the micro-jet also decreases accordingly. Moreover, the second collapse of the cavitation bubble cannot be found if the additional pressure reduces further. When the cavitation bubble is located in different angles with vertical direction, its collapse direction is always perpendicular to the wall. If the double cavitation bubbles are arranged vertically, the collapse process of the upper bubble will be quicker, as the relative distance increases. When the relative distance between the bubbles is large enough, no second collapse can be found for the upper bubble. On the other hand, when two cavitation bubbles are in the horizontal arrangement, the suppression effect between cavitation bubbles decreases as the relative distance between the bubbles increases and the collapse position of cavitation bubbles moves from the lower part to the upper part. [ABSTRACT FROM AUTHOR]

• Micro-jets perpendicularly hammering the material cause the greatest damage to the material surface and generate the eccentric bowl-shaped erosion pit are given. • The magnitude of material surface stress is positively related to the velocity of water hammer, the surface stress in the hammering area is the largest, and the stress nephogram is conical. • Neglecting the damage at the end of hammering, the surface of the material produced the maximum stress at the moment when the micro-jets contact the metal plate, and the magnitude of stress decreases with the impact process. In order to obtain the fatigue damage characteristics of materials from the cavitation bubble collapse zone, a hammering strategy of micro-jet water hammer is conceived, and a hammering of metal plate by micro-jet water hammer with cavitation bubbles is studied by numerical simulation method. The stress response characteristics of the metal plate(HT-200) in the instantaneous and whole hammering process are explored. It is also revealed that the maximum stress will be generated when water hammer with the same velocity hammering the metal plate at 90 degrees angle, and a bowl-shaped impact will be formed. However, eccentric bowl-shaped pit will be produced when the metal plate is hammered at a non-90 degree angle. Meanwhile, the simulation results are compared with the experimental cavitation pits, and the validity of the numerical simulation is verified. [ABSTRACT FROM AUTHOR]

A gas jet from a capillary was excited by an electrical discharge and produces a localized deposition. In a stationary experiment one obtains a spot-like peak-shaped deposition while a moving capillary can ‘write’ the deposition. If a jet of hexamethyldisiloxane passes an oxygen plasma, the deposition is quartz-like. With an acetylene jet, a deposition rate of approximately 240 μm/s and a mass conversion from the gas into the deposition of more than 20% were observed. [Copyright &y& Elsevier]