Search

The inner walls of the drinking water distribution system (DWDS) are expected to be clean to ensure a safe quality of drinking water. Complex physical, chemical, and biological processes take place when water comes into contact with the pipe surface. This paper describes the impact of leaching different compounds from the water supply pipes into drinking water and subsequent risks. Among these compounds, there are heavy metals. It is necessary to prevent these metals from getting into the DWDS. Those compounds are susceptible to impacting the quality of the water delivered to the population either by leaching dangerous chemicals into water or by enhancing the development of microorganism growth on the pipe surface. The corrosion process of different pipe materials, scale formation mechanisms, and the impact of bacteria formed in corrosion layers are discussed. Water treatment processes and the pipe materials also affect the water composition. Pipe materials act differently in the flowing and stagnation conditions. Moreover, they age differently (e.g., metal-based pipes are subjected to corrosion while polymer-based pipes have a decreased mechanical resistance) and are susceptible to enhanced bacterial film formation. Water distribution pipes are a dynamic environment, therefore, the models that are used must consider the changes that occur over time. Mathematical modeling of the leaching process is complex and includes the description of corrosion development over time, correlated with a model for the biofilm formation and the disinfectants–corrosion products and disinfectants–biofilm interactions. The models used for these processes range from simple longitudinal dispersion models to Monte Carlo simulations and 3D modeling. This review helps to clarify what are the possible sources of compounds responsible for drinking water quality degradation. Additionally, it gives guidance on the measures that are needed to maintain stable and safe drinking water quality. [ABSTRACT FROM AUTHOR]

The inner walls of the drinking water distribution system (DWDS) are expected to be clean to ensure a safe quality of drinking water. Complex physical, chemical, and biological processes take place when water comes into contact with the pipe surface. This paper describes the impact of leaching different compounds from the water supply pipes into drinking water and subsequent risks. Among these compounds, there are heavy metals. It is necessary to prevent these metals from getting into the DWDS. Those compounds are susceptible to impacting the quality of the water delivered to the population either by leaching dangerous chemicals into water or by enhancing the development of microorganism growth on the pipe surface. The corrosion process of different pipe materials, scale formation mechanisms, and the impact of bacteria formed in corrosion layers are discussed. Water treatment processes and the pipe materials also affect the water composition. Pipe materials act differently in the flowing and stagnation conditions. Moreover, they age differently (e.g., metal-based pipes are subjected to corrosion while polymer-based pipes have a decreased mechanical resistance) and are susceptible to enhanced bacterial film formation. Water distribution pipes are a dynamic environment, therefore, the models that are used must consider the changes that occur over time. Mathematical modeling of the leaching process is complex and includes the description of corrosion development over time, correlated with a model for the biofilm formation and the disinfectants–corrosion products and disinfectants–biofilm interactions. The models used for these processes range from simple longitudinal dispersion models to Monte Carlo simulations and 3D modeling. This review helps to clarify what are the possible sources of compounds responsible for drinking water quality degradation. Additionally, it gives guidance on the measures that are needed to maintain stable and safe drinking water quality.

In the second half of the nineteenth century, many American cities built water systems using lead or iron service pipes. Municipal water systems generated significant public health improvements, but these improvements may have been partially offset by the damaging effects of lead exposure through lead water pipes. We study the effect of cities' use of lead pipes on homicide between 1921 and 1936. Lead water pipes exposed entire city populations to much higher doses of lead than have previously been studied in relation to crime. Our estimates suggest that cities' use of lead service pipes considerably increased city-level homicide rates. [ABSTRACT FROM AUTHOR]

Cumulative changes in chemical and biological properties associated with higher 'water age' in distribution systems may impact water corrosivity and regulatory compliance with lead and copper action levels. The purpose of this study was to examine the effects of water age and chemistry on corrosivity of various downstream premise plumbing pipe materials and configurations using a combination of controlled laboratory studies and a field survey. Examination of lead pipe, copper pipe with lead solder, and leaded brass materials in a replicated lab rig simulating premise plumbing stagnation events indicated that lead or copper release could increase as much as ∼440 % or decrease as much as 98 % relative to water treatment plant effluent. In field studies at five utilities, trends in lead and copper release were highly dependent on circumstance; for example, lead release increased with water age in 13 % of cases and decreased with water age in 33 % of conditions tested. Levels of copper in the distribution system were up to 50 % lower and as much as 30 % higher relative to levels at the treatment plant. In many cases, high-risks of elevated lead and copper did not co-occur, demonstrating that these contaminants will have to be sampled separately to identify 'worst case' conditions for human exposure and monitoring. [ABSTRACT FROM AUTHOR]

This paper examines the effect of waterborne lead exposure on infant mortality in American cities over the period 1900 to 1920. Variation across cities in water acidity and the types of service pipes, which together determined the extent of lead exposure, identifies the effects of lead on infant mortality. In 1900, a decline in exposure equivalent to an increase in pH from 6.675 (25th percentile) to 7.3 (50th percentile) in cities with lead-only pipes would have been associated with a decrease in infant mortality of 7% to 33%, or at least twelve fewer infant deaths per 1,000 live births. [ABSTRACT FROM AUTHOR]

It is now universally accepted that utilization of lead for domestic purposes and water distribution presents a major health hazard. The ancient Roman world was unaware of these risks. How far the gigantic network of lead pipes used in ancient Rome compromised public health in the city is unknown. Lead isotopes in sediments from the harbor of Imperial Rome register the presence of a strong anthropogenic component during the beginning of the Common Era and the Early Middle Ages. They demonstrate that the lead pipes of the water distribution system increased Pb contents in drinking water of the capital city by up to two orders of magnitude over the natural background. The Pb isotope record shows that the discontinuities in the pollution of the Tiber by lead are intimately entwined with the major issues affecting Late Antique Rome and its water distribution system. [ABSTRACT FROM AUTHOR]

Pipe connectors can significantly influence galvanic corrosion between lead and copper pipes by distancing the lead from copper pipe, introducing a third metal, and forming crevices. In this study, the effects of distance, connector material, and crevices on galvanic corrosion were examined, and bench-scale comparison testing of commercial connectors was conducted using real tap waters. Brass connectors were found to only slightly decrease (< 25%) the galvanic current that sacrifices, or corrodes, lead pipe, with higher reductions for brasses with higher zinc content. Crevices in brass connectors contained water with extremely high levels of lead (up to 9.4 x 106 µg/L); in bench-scale tests, crevices produced approximately four times more lead release to the water than did direct connections. [ABSTRACT FROM AUTHOR]

Laboratory experiments were performed to evaluate the effect of galvanic corrosion on lead release following simulated partial lead service line replacements. Experiments were conducted in a recirculating flow mode with intermittent stagnation periods using aged lead pipes harvested from Washington, D.C. Lead pipe and copper tubing were connected by brass, brass dielectric, and plastic couplings; additional experiments were performed with plastic couplings and an external wire to connect the leadand copper. Lead release increased in the order of systems connected with plastic, plastic with external wires, brass dielectric, and brass couplings. The trends are consistent with galvanic reactions between lead and copper and between lead and brass. For systems with galvanic corrosion, the increased lead release was primarily in a particulate form. Increasing the chloride-to-sulfate mass ratio from 0.7 to 7 did not increase the dissolved or total lead release. [ABSTRACT FROM AUTHOR]

Partial lead service line replacement with copper pipe creates a galvanic cell that can accelerate lead corrosion. Bench-scale experiments under stagnant water conditions of high chloride-to-sulfate mass ratio (CSMR) demonstrated that galvanic connections between lead pipe (new or aged) and copper pipe increased lead release into the water by 1.1 to 16 times, compared with a full length of lead pipe alone. The extent of galvanic attack was dependent on drinking water quality. Exposure to water of high CSMR increased lead release in the lead-copper rigs by 3 to 12 times, compared with a less aggressive low CSMR water. Galvanic current also increased by 1.5 to 2 times when switching from low to high CSMR. The small area of lead pipe adjacent to the copper joint (< 0.5 ft) dissipated 90-95% of the total galvanic current and accumulated a thick (1-in.-wide) layer of lead rust (i.e., a lead-containing scale), which constituted a reservoir for semirandom particulate lead detachment into the water. [ABSTRACT FROM AUTHOR]

The article focuses on the issues of using partial service line replacement of water pipes to decrease the lead content of water. The Centers for Disease Control and Prevention (CDC) says that new research shows that partial replacement of lead service water lines can be associated to the increased incidence of high levels of lead in the blood of children. Marc Edwards, an environmental engineer at Virginia Polytechnic Institute and State University, notes that partial service line replacement is similar to creating a source of lead dust which is delivered to every homes and is accessible of children. The 1992 report "Economics of Lead Pipe Replacement" cites that a lead pipe which is partially replaced should decrease the content of lead, however, unexpected rise of lead content occurs. INSETS: Galvanic Corrosion;Timing Is Everything.

Abstract: The corrosion of lead-rich pipes in historical organs in different parts of Europe has been investigated. The influence of the environment and the composition and microstructure of the pipe metal was studied. Pipe corrosion was documented by visual inspection (boroscope). The corrosion attack and the composition and microstructure of the metal were characterized by OM, SEM, XRD, IC and FAAS. It is shown that the degree of corrosion of the pipes is correlated to the concentration of gaseous acetic and formic acid in the organ. The organic acids are emitted by the wood from which the wind system is built. It is also shown that pipe corrosion decreases with increasing tin content in the range 0–4% (wt). Possible conservation strategies are discussed. [Copyright &y& Elsevier]

Lead pipes for carrying drinking water were well recognized as a cause of lead poisoning by the late 1800s in the United States. By the 1920s, many cities and towns were prohibiting or restricting their use. To combat this trend, the lead industry carried out a prolonged and effective campaign to promote the use of lead pipes. Led by the Lead Industries Association (LIA), representatives were sent to speak with plumbers' organizations, local water authorities, architects, and federal officials. The LIA also published numerous articles and books that extolled the advantages of lead over other materials and gave practical advice on the installation and repair of lead pipes. The LIA's activities over several decades therefore contributed to the present-day public health and economic cost of lead water pipes. (Am J Public Health. 2008;98:1584-1592. doi:10.2105/AJPH.2007.113555) [ABSTRACT FROM AUTHOR]

In 1897, about half of all American municipalities used lead pipes to distribute water. Employing data from Massachusetts, this paper compares infant death rates in cities that used lead water pipes to rates in cities that used nonlead pipes. In the average town in 1900, the use of lead pipes increased infant mortality by 25 to 50 percent. However, in cities using new pipes and distributing acidic water, lead pipes increased infant mortality three- to four-fold. Qualitative evidence supports the econometric results and indicates the adverse effects of lead extended beyond Massachusetts. [ABSTRACT FROM AUTHOR]

Highlights the number of residences in Washington, D.C. that have lead service pipes as of March 2004. Effects of lead exposure on children and adults; Percentage of households that used water filters; Cause of an increase in water lead levels.

The article offers U.S. health news briefs through referencing "The Nation's Health" periodical. Legislative bills in U.S. states have reduced nonmedical exemptions for refusing vaccines, within the context of measles cases in the U.S, are discussed. There have been increases in the replacement of lead water pipes in the U.S. to reduce lead toxicity in water.

Announcing an update to In the Library with the Lead Pipe's submission guidelines. [ABSTRACT FROM AUTHOR]

Abstract: This response to a letter to the Editor by Edwards details the lack of sufficient data for further analyses. [Copyright &y& Elsevier]

The article focuses on the removal of lead service lines by the Wisconsin Department of Natural Resources to control the chemical corrosion in drinking waters in Madison, Wisconsin. It mentions that the replacement of lead service lines will reduce the level of leads in drinking water based from the required level of the U.S. Environmental Protection Agency (EPA). On the other hand, there was a disagreement on who will finance the replacement of privately owned service lines.

A lists of first industries in the U.S. from 1800 to 1825 is presented, including a cotton mill in New Hampshire, white lead in Philadelphia, Pennsylvania and tin plating of lead pipe in New York City.