Search

Energy harnessing from hydrokinetic systems has been explored over several centuries. With advancements in the technology in last decade, and the intermittent nature of other technologies for energy harvesting, interest in harnessing energy from water-based hydrokinetic systems has amplified. This paper reviews and studies the state-of-the-art of these systems in sea- and river-based applications. The history of development, working principles, different turbines classifications, and research prospects and opportunities are reviewed and discussed. We also conduct a survey of currently available commercial technologies. Elements of the design that need to be enhanced are presented in detail, along with further research prospects in areas related to the technology.

Split-belt treadmill walking, in which the two belts move at different speeds, reveals a mechanism through which energy can be extracted from the environment. When a person walks with positive step length asymmetry on a split-belt treadmill, the treadmill can perform net positive work on the person. Here we use a split-belt rimless wheel model to explore how people could take advantage of the treadmill. We show that a split-belt rimless wheel can passively walk steadily by capturing energy from the treadmill to overcome collision losses, whereas it loses energy on each step with no way to recover the losses when walking on tied belts. Our simulated split-belt rimless wheel can walk steadily for a variety of leg angle and belt speed combinations, tolerating both speed disturbances and ground height variability. The wheel can even capture enough energy to walk uphill. We also built a physical split-belt rimless wheel robot and demonstrated that it can walk continuously without additional energy input. In comparing the wheel solutions to human split-belt gait, we found that humans do not maximize positive work performed by the treadmill. Other aspects of walking, such as costs associated with swing, balance, and free vertical moments, likely limit people's ability to benefit from the treadmill. This study uses a simple walking model to characterize the mechanics and energetics of split-belt walking, demonstrating that energy capture through intermittent contact with two belts is possible and providing a simple model framework for understanding human adaptation during split-belt walking. [ABSTRACT FROM AUTHOR]

Power generation is becoming an increasing problem in South Africa. South Africa produces approximately 90% of its electricity from coal-fired power stations and only 5% from hydroelectric power stations and pumped storage. Durban has a very steep topography, which results in high pressure in certain parts of the water distribution network (WDN). Leakage is costly and contributes to a large extent to non-revenue water (NRW) in the network. Pressure reducing valves (PRVs) are used in WDNs to control the pressure in the pipework to reduce leakage. This excess pressure can be used to generate electricity by a pump acting as a turbine (PAT). The electricity generated is a function of the flow rate and the pressure reduction through the PAT. The hydraulic modelling software EPANET 2.2 is used for the analysis of the Cornubia Integrated Human Settlement Development Phase 2A WDN in Durban. EPANET is used to determine the strategic placement of PATs in the WDN and their setting and configuration to extract the most energy and reduce pressure in the system. A configuration of five PATs of different sizes extracts a total power output of 166.31 kW and reduces leakage in the WDN by 45.59 kL per month, which is an 18.16% reduction in leakage. [ABSTRACT FROM AUTHOR]

Power generation is becoming an increasing problem in South Africa. South Africa produces approximately 90% of its electricity from coal-fired power stations and only 5% from hydroelectric power stations and pumped storage. Durban has a very steep topography, which results in high pressure in certain parts of the water distribution network (WDN). Leakage is costly and contributes to a large extent to non-revenue water (NRW) in the network. Pressure reducing valves (PRVs) are used in WDNs to control the pressure in the pipework to reduce leakage. This excess pressure can be used to generate electricity by a pump acting as a turbine (PAT). The electricity generated is a function of the flow rate and the pressure reduction through the PAT. The hydraulic modelling software EPANET 2.2 is used for the analysis of the Cornubia Integrated Human Settlement Development Phase 2A WDN in Durban. EPANET is used to determine the strategic placement of PATs in the WDN and their setting and configuration to extract the most energy and reduce pressure in the system. A configuration of five PATs of different sizes extracts a total power output of 166.31 kW and reduces leakage in the WDN by 45.59 kL per month, which is an 18.16% reduction in leakage.

Vortex-induced oscillations offer a potential means to harness hydrokinetic energy even at low current speeds. In this study, we consider a novel converter where a cylinder undergoes angular oscillations with respect to a pivot point, in contrast to most previous configurations, where the cylinder undergoes flow-induced oscillations transversely to the incident free stream. We formulate a theoretical model to deal with the coupling of the hydrodynamics and the structural dynamics, and we numerically solve the resulting nonlinear equation of cylinder motion in order to assess the performance of the energy converter. The hydrodynamical model utilizes a novel approach where the fluid forces acting on the oscillating cylinder are split into components acting along and normal to the instantaneous relative velocity between the moving cylinder and the free stream. Contour plots illustrate the effects of the main design parameters (in dimensionless form) on the angular response of the cylinder and the energy efficiency of the converter. Peak efficiencies of approximately 20% can be attained by optimal selection of the main design parameters. Guidelines on the sizing of actual converters are discussed.

[Display omitted] Phase change materials (PCM) are largely assessed on their ability towards energy storage and their enthalpy efficiency of discharging the stored energy. Nevertheless, their applications are limited by the low thermal conductivity behaviour, despite their tunable transition temperature abilities. The present work demonstrates a novel concept to develop and explore PCM composite by embedding two unique zinc oxide tetrapod classes to engineer the heat transfer mechanism for potential utilization in thermal energy storage. Tetrapods embedded phase change material (TPCM) composite displayed up to 94% enhancement in thermal conductivity without compromising melting enthalpy. TPCM composite with high thermal conductivity, high heat capacity, broad photo-absorptivity, improved stability in isothermal conditions, and long thermal cycles offer attractive solutions for effective thermal energy storage, efficient solar energy harnessing, and thermal management. With demonstrated abilities, the developed TPCM composite material could play a significant role in the progress of renewable energy needs in future. [ABSTRACT FROM AUTHOR]

Abstract: Maximization of the harvested energy from piezoelectric bimorphs has been the objective of many researchers in the past few years. Most of the previous work focused on bimorphs covered with a single pair of electrodes, leading to a great loss of generated power due to charge cancellation from areas with opposite strains. In this paper, we assume the bimorph is covered with multiple pairs of electrodes to overcome the problem of charge cancellation. We focus on circular bimorphs subject to base excitation at different frequencies. We also assume that the capacitances attached to the electrodes are controllable and can be optimized to maximize the power output at a given excitation frequency. Moreover, we change the topology of the bimorph by making its thickness vary with the radius of the bimorph. Numerical examples show that the harnessed power can be maximized by increasing the capacitance of anti-nodal elements while decreasing that of nodal elements. Also, decreasing the thickness of piezoelectric layers at anti-nodal elements allows more straining and hence the generation of more power. It is shown that the compatibility of the topology of the piezoelectric bimorph with the shape of the second axisymmetric mode yields more power compared with its compatibility with the first mode. [Copyright &y& Elsevier]

Vortex-induced oscillations offer a potential means to harness hydrokinetic energy even at low current speeds. In this study, we consider a novel converter where a cylinder undergoes angular oscillations with respect to a pivot point, in contrast to most previous configurations, where the cylinder undergoes flow-induced oscillations transversely to the incident free stream. We formulate a theoretical model to deal with the coupling of the hydrodynamics and the structural dynamics, and we numerically solve the resulting nonlinear equation of cylinder motion in order to assess the performance of the energy converter. The hydrodynamical model utilizes a novel approach where the fluid forces acting on the oscillating cylinder are split into components acting along and normal to the instantaneous relative velocity between the moving cylinder and the free stream. Contour plots illustrate the effects of the main design parameters (in dimensionless form) on the angular response of the cylinder and the energy efficiency of the converter. Peak efficiencies of approximately 20% can be attained by optimal selection of the main design parameters. Guidelines on the sizing of actual converters are discussed. [ABSTRACT FROM AUTHOR]