Search

Three-dimensional (3D) printing polymers such as urethane dimethacrylate (UDMA) and ethoxylated bisphenol A dimethacrylate (Bis-EMA) are typically used in definitive prosthesis and require surface treatments before bonding. However, surface treatment and adhesion conditions often affect long-term use. Herein, polymers were divided into Groups 1 and 2 for the UDMA and Bis-EMA components, respectively. The shear bond strength (SBS) between two types of 3D printing resins and resin cements was measured using Rely X Ultimate Cement and Rely X U200, according to adhesion conditions such as single bond universal (SBU) and airborne-particle abrasion (APA) treatments. Thermocycling was performed to evaluate the long-term stability. Sample surface changes were observed using a scanning electron microscope and surface roughness measuring instrument. The effect of interaction between the resin material and adhesion conditions on the SBS was analyzed via a two-way analysis of variance. The optimal adhesion condition for Group 1 was achieved when U200 was used after APA and SBU, whereas Group 2 was not significantly affected by the adhesion conditions. After thermocycling, the SBS significantly decreased in Group 1 without APA treatment and in the entire Group 2. Additionally, porosity, along with increased roughness, was observed on both material surfaces after APA.

The development of an efficient and stable hole extraction layer (HEL) is crucial for commercializing organic solar cells (OSCs). Although a few candidates have been widely utilized as HELs for OSCs, the most appropriate material has been lacking. A few articles have recently reported graphene oxide (GO) as a well-working HEL that offers comparable performance to conventional HELs. However, a systematic study providing comprehensive insight into the GO-based OSC behavior is lacking. This article discusses broad topics, including the material properties, device efficiency, shelf lifetime, and impedance properties. We found that GO offers excellent properties, which are identical to those of conventional HELs, while the shelf lifetime shows a significant 6-fold increase. Furthermore, we discuss the significantly reduced space-charge limited region of an aged GO-based OSC compared with a PEDOT:PSS-based device, which is revealed to be a reason for the different shelf lifetime. We believe that the results will accelerate the development of GO as an HEL for OSCs and other optoelectronic devices.

The binding of the cinnamycin on the biomimetic membrane was studied with respect to time using the surface plasmon resonance(SPR). The membrane was composed of the inner layer tethered on the gold surface and the outer layer formed on the inner layer, which was at the desired ratio of dioleoylphosphatidylethanolamine(DOPE) to dioleoylphosphatidyl- choline(DOPC). On the bilayer, the cinnamycin solution was injected and showed different behavior of the binding with respect to time up on its concentration. For kinetic analysis, the behavior was converted to the coverage fraction with respect to time, which was ratio to the saturated response of 5 μM cinnamycin solution. The fraction change with respect to time was function of the available-site, which was eventually the subtraction of the fraction from one. With the fitting of the first order of the available site, the rate constant was acquired into 6∼7 × 10−3 s-1. Furthermore, the reciprocals of the fraction and the concentration were fitted with the Langmuir adsorption isotherm. From the fitting, the equilibrium constant was between 1 × 107 and 5 × 107 M-1.

This report demonstrates how scanning X-ray fluorescence microscopy (SXFM) and nanoscale X-ray absorption near-edge structure (nano-XANES) can spatially and chemically identify intracellular iron species at the single-cell level, creating an opportunity to examine the role of iron storage in magnetite biomineralization. Fe K-edge nano-XANES measurements of Magnetospirillum gryphiswaldense in varied iron media conditions and iron storage capacity revealed intracellular iron heterogeneities through a distinction between formed magnetosomes and intracellular iron material. This work highlights the potential of nano-XANES in providing an experimental advantage in the multidisciplinary field of biomineralization.

Purpose The aims of the present study were to evaluate the immunogenicity of an inactivated rabies vaccine based on the ERAGS strain. Materials and methods The ERAGS virus propagated in Vero cells was inactivated with 3 mM binary ethylenimine for 8 hours. Three types of inactivated rabies vaccines were prepared to determine the minimum vaccine virus titers. Four further types of inactivated rabies vaccines were prepared by blending inactivated ERAGS with four different adjuvants; each vaccine was injected into mice, guinea pigs, and dogs to identify the optimal adjuvant. The immunogenicity of a Montanide (IMS) gel-adjuvanted vaccine was evaluated in cats, dogs, and cattle. Humoral immune responses were measured via a fluorescent antibody virus neutralization method and a blocking enzyme-linked immunosorbent assay. Results The minimum virus titer of the inactivated rabies vaccine was over 107.0 50% tissue culture infectious doses (TCID50 values)/mL. Of the four kinds of adjuvants, the IMS gel-adjuvanted vaccine induced the highest mean viral neutralizing antibody (VNA) titers of 6.24 and 2.36 IU/mL in guinea pigs and dogs, respectively, and was thus selected as the vaccine for the target animals. Cats, dogs, and cattle inoculated with the IMS gel-adjuvanted vaccine developed protective VNA titers ranging from 3.5 to 1.2 IU/mL at 4 weeks post-inoculation (WPI). Conclusion Our data indicate that cats, dogs, and cattle inoculated with an inactivated rabies vaccine derived from the ERAGS strain developed protective immune responses that were maintained to 12 WPI.

Background Fluorescent antibody virus neutralization (FAVN) test is a standard assay for quantifying rabies virus-neutralizing antibody (VNA) in serum. However, a safer rabies virus (RABV) should be used in the FAVN assay. There is a need for a new method that is economical and time-saving by eliminating the immunostaining step. Objectives We aimed to improve the traditional FAVN method by rescuing and characterizing a new recombinant RABV expressing green fluorescent protein (GFP). Methods A new recombinant RABV expressing GFP designated as ERAGS-GFP was rescued using a reverse genetic system. Immuno-fluorescence assay, peroxidase-linked assay, electron microscopy and reverse transcription polymerase chain reaction were performed to confirm the recombinant ERAGS-GFP virus as a RABV expressing the GFP gene. The safety of ERAGS-GFP was evaluated in 4-week-old mice. The rabies VNA titers were measured and compared with conventional FAVN and FAVN-GFP tests using VERO cells. Results The virus propagated in VERO cells was confirmed as RABV expressing GFP. The ERAGS-GFP showed the highest titer (108.0 TCID50/mL) in VERO cells at 5 days post-inoculation, and GFP expression persisted until passage 30. The body weight of 4-week-old mice inoculated intracranially with ERAGS-GFP continued to increase and the survival rate was 100%. In 62 dog sera, the FAVN-GFP result was significantly correlated with that of conventional FAVN (r = 0.95). Conclusions We constructed ERAGS-GFP, which could replace the challenge virus standard-11 strain used in FAVN test.

The behavior of cinnamycin on a biomimetic membrane was studied with respect to the curvature of a phosphatidylethanolamine (PE)-included membrane with the adhesion measured using an atomic force microscope (AFM). The membrane was formed through vesicle fusion on the hydrophobic surface of silica spheres, which was used to define the curvature of the membrane. The hydrophobicity was generated by the reaction of alkyl-silane and analyzed with an X-ray photoelectron spectrometer. The cinnamycin, immobilized covalently to the AFM tip coated with 1-mercapto-1-undecanol that was observed to be inert to any adhesion to the membrane, showed that the adhesion became stronger with the increase in the curvature. The correlation between the adhesion and the curvature was linearly proportional. Since it was found that the cinnamycin was bound to a PE headgroup and the binding was enhanced by the interaction of the hydrophobic area located at one side of the cinnamycin, the linear proportionality seems to suggest that the interaction is related to the one dimensional orientation of the binding.

Feline panleukopenia virus (FPV) causes fatal leukopenia and severe hemorrhagic diarrhea in cats. Although FPV isolates have been reported worldwide from several animals, the biological and genetic features of South Korean FPVs remain unclear. We characterized molecularly South Korean FPV isolates. Crandell-Rees feline kidney (CRFK) cells were used to isolate FPV from 60 organ homogenates. The isolates were confirmed to be FPVs via analyses of cytopathic effects, immunofluorescence studies, electron microscopy, and polymerase chain reaction. Viral genetic analyses used the full VP2 sequences. Eight isolates propagated in CRFK cells were confirmed to be FPVs. All isolates yielded viral titers ranging from 104.5 to 106.0 TCID50/mL 5 days after inoculation into CRFK cells and exhibited hemagglutination titers ranging from 27 to 212 (using pig erythrocytes). The Korean FPV isolates grew well in cat cells such as CRFK and Fcwf4 cells. The FPV isolates were most similar to the KS42 strain isolated from a Korean cat in 2008. The FPV isolates will serve as useful antigens in future sero-epidemiological studies and will aid in the development of diagnostic tools.

The adductor muscle of the pen shell Atrina pectinata (AMPS) is a popular protein‐enriched food item in Asian Pacific countries, and has only been marketed in the frozen condition, as a result browning and decreased sensory attributes occur. To overcome these problems, superheated steam roasting (at 270°C for 4 min) combined with the hot smoke (10 min) using a selective Oak sawdust was employed to develop a new AMPS product yielding high physicochemical properties during storage periods (0–13 days) especially at 10°C. The processed AMPS showed high sensory preferences because of good odor, color, and textural properties. It also significantly inhibited bacterial growth, volatile basic nitrogen, thiobarbituric acid‐reactive species, and pH changes, and eventually possessed higher nutritional composition with low trimethylamine N‐oxide level. Results indicate that saturated steam allows AMPS at good physicochemical conditions, whereas hot smoke‐derived aroma compounds prolong its shelf life through antioxidant and antimicrobial activities.

For marine diesel engines, the selective catalytic reduction (SCR) system can be tailored to ensure high nitrogen oxides (NOx) reduction performance, low ammonia (NH3) slip, and low urea consumption. A sufficient mixing zone of urea water solution (UWS) and exhaust gas are required because of the limited installation space. In this study, therefore, mixing units such as a swirl-type mixer and an additional mixing chamber were adopted to improve the flow mixing performance with a low-pressure drop in a marine urea-SCR system. The application of mixing units gave a positive influence on the flow turbulent characteristics and urea decomposition into NH3. The mixer caused flow recirculation and increased turbulent intensity. Moreover, the additional mixing chamber was able to achieve an enhanced residence time for the UWS injections. When mixing units both were combined, it showed the highest conversion efficiency (urea to NH3). In comparison to the SCR system without any mixing units, improvement in the efficiency of deNOx was observed of 61.3 % by the application of the mixing chamber, 76.2 % by the application of the mixer, and 86.3 % by the application of the mixer and the mixing chamber combined.

The adductor muscle of the pen shell Atrina pectinata (AMPS) is a popular protein‐enriched food item in Asian Pacific countries, and has only been marketed in the frozen condition, as a result browning and decreased sensory attributes occur. To overcome these problems, superheated steam roasting (at 270°C for 4 min) combined with the hot smoke (10 min) using a selective Oak sawdust was employed to develop a new AMPS product yielding high physicochemical properties during storage periods (0–13 days) especially at 10°C. The processed AMPS showed high sensory preferences because of good odor, color, and textural properties. It also significantly inhibited bacterial growth, volatile basic nitrogen, thiobarbituric acid‐reactive species, and pH changes, and eventually possessed higher nutritional composition with low trimethylamine N‐oxide level. Results indicate that saturated steam allows AMPS at good physicochemical conditions, whereas hot smoke‐derived aroma compounds prolong its shelf life through antioxidant and antimicrobial activities.

We studied the electron doping of bilayer graphene (BLG) on hexagonal boron nitride (h-BN) by dissociative H2 adsorption. Charge transfer phenomena were investigated by the gate voltage (Vg)-dependent electrical conductivity σ(Vg) and Raman spectroscopy with respect to the H2 exposure. The shift of the charge neutrality point toward the negative Vg region was observed and the charge scattering mechanism was found with the variation of σ(Vg). The charge transfer at the interface as well as the lattice distortion of BLG due to hydrogenation were verified by Raman spectroscopy. From these results, we concluded that the electron doping and short-range scattering in the BLG exposed to high H2 pressure (11 bar) are intrinsic features, which were achieved using a van der Waals interface consisting of BLG and h-BN.

Lactic acid bacteria (LAB) were reported to comprise the majority of the bacterial population in mukeunji, a long-fermented kimchi. This current study investigated the probiotic abilities of LAB isolated from mukeunji. Forty bacterial strains from mukeunji were identified by SDS-PAGE gel patterns, which were further tested for acid and bile tolerance. An assessment of the immuneboosting effects of these strains in RAW264.7 cells was also carried out by measurement of secreted proinflammatory cytokines. Heat-killed LAB were also tested for their contribution to cytokine production because certain LAB are not durable in the digestive tract. Immune-boosting strains were further characterized by SDS-PAGE of whole-cell protein and 16S rRNA gene sequencing, resulting in the identification of Lactobacillus plantarum, L. sakei, Weissella cibaria, and Pediococcus parvulus. These data and the fact that mukeunji is highly consumed in Korea, together, highlight the need of detailed epidemiological and animal feeding studies.