1. Grey Relationship Analysis of Cutting Forces and Surface Roughness in Turning using Cryo-treated and Untreated Cutting Tools.
- Author
-
Baday, Şehmus, Gürbüz, Hüseyin, and Ersöz, Onur
- Subjects
- *
CUTTING force , *SURFACE roughness , *SURFACE forces , *TAGUCHI methods , *SURFACE analysis , *CUTTING tools - Abstract
The aim of this experimental study is to establish the optimum heat treatment procedure and machining parameters to obtain values of cutting force and surface roughness in machining AISI 1050 workpiece by utilizing grey relations analysis based on Taguchi method. In this regard, machining operations were carried out at three different cutting speeds and three different feed rates at a constant depth of cut. Taguchi mixed-level design L18 (2^2 3^2) was chosen for machining experiments. The optimum heat treatment and machining parameters for determination of cutting force and surface roughness values were identified according to the fact that higher the Signal/Noise ratio is better based on grey relations analysis of Taguchi method. The results showed that the optimum parameters for surface roughness and cutting forces were obtained as 0.1 mm/rev at feed rate and 180 m/min at cutting speed with cryo-treated cutting tool. According to ANOVA table and Signal/Noise ratios, it was specified that the most effective parameters on cutting forces and surface roughness were feed rate, cutting speed and heat treatment conditions, respectively. [ABSTRACT FROM AUTHOR] more...
- Published
- 2024
- Full Text
- View/download PDF