Search

Incubation effects in the nanosecond laser ablation of metals exhibit a strong dependence on the thermal and mechanical properties of both the target material and the background gas or liquid. The incubation in air is controlled mainly by thermal properties such as the heat of vaporization. In liquid, the correlation of the incubation and the ultimate tensile stress of the metals suggests that incubation may be related to the mechanical impact on the solid material by the cavitation bubble collapse, causing accumulation of voids and cracks in the subsurface region of the ablation craters. At high ultimate tensile stress, however, the low sensitivity to the environment suggests that the mechanical impact is likely to play a negligible role in the incubation. Finally, the correlation between the incubation and the carbon content of alcoholic liquids may be explained by an absorptivity increase of the cavity surfaces due to carbonaceous deposits generated by laser-induced pyrolysis, or by the mechanical impact of long-living bubbles at higher dynamic viscosity of liquids.

Homogeneous polycrystalline FexOy nanoparticles were generated by ablation of iron targets in water by nanosecond laser pulses at 532 nm. In ethanol, crystalline core‐shell Fe/FexOy structures with size medians around 20 nm were produced. The ablation of FeWxOy targets in water resulted in crystalline hollow shells and homogeneous FeWxOy nanoparticles. In contrast, amorphous core‐shell FeWxOy nanoparticles with a median size of 17 nm were produced in ethanol. The size distribution of both the FexOy and the FeWxOy particles showed a slight dependence on fluence and pulse number. This may be related to primary and secondary ablation and modification mechanisms., Partial financial support by the H2020 Action MSCA‐IF 656908‐NIMBLIS‐ESR is acknowledged. Further partial funding came from the National Science Foundation through Grant CMMI‐1301298, and the MAT2015‐67354‐R project of the Spanish Ministry of Economy and Competitiveness (MINECO).

In this study, galvanic coatings of Cu and Ni, typically applied in industrial standard routines, were investigated. Ablation experiments were carried out using the first two harmonic wavelengths of a pulsed Nd:YAG laser and the resulting plasma spectra were analysed using a linear Pearson correlation method. For both wavelengths the absorption/ablation behaviour as well as laser-induced breakdown spectroscopy (LIBS) depth profiles were studied varying laser fluences between 4.3–17.2 J/cm$$^2$$ at 532 nm and 2.9–11.7 J/cm$$^2$$ at 1064 nm. The LIBS-stratigrams were compared with energy-dispersive X-ray spectroscopy of cross-sections. The ablation rates were calculated and compared to theoretical values originating from a thermal ablation model. Generally, higher ablation rates were obtained with 532 nm light for both materials. The light–plasma interaction is suggested as possible cause of the lower ablation rates in the infrared regime. Neither clear evidence of the pure thermal ablation, nor correlation with optical properties of investigated materials was obtained.